• Carbon letters
• /
• v.9 no.4
• /
• pp.324-339
• /
• 2008

The principal aims of the review paper are (1) to establish broad overview information, both qualitative and quantitative, relating to the world market for polyacrylonitrile (PAN) or pitch-based carbon fibers; and (2) to generate an effective analysis and break down of consumption by process route and eventual end-use. The review paper also designed specifically to provide subscribers with an accurate, independent, and realistic assessment of the current status and future perspective of the market for carbon fibers in the world. The world market for carbon fibers continues to grow rapidly, fuelled by new industrial end uses, such as sport and leisure goods, aerospace, automotive applications, civil engineering and infrastructure repair, and immerging applications in energy generation. Demands for properties of carbon fibers used in those applications include many things such as strength, toughness, fatigue property, corrosion resistance, heat resistance, etc., and these become to be higher level. On the other hand, demands for manufacturing technologies of carbon fibers become to be difficult with these demands for properties, and these are wide variety such as high efficiencies, high qualities, many functions, labor saving, and low cost. In this review paper, thus, the recent carbon fibers corresponded to these needs, and its latest manufacturing technologies as well as market prospects are described.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.197-203
• /
• 2014

The technology to predict and prevent an accident of the cable system in power station is required. The techniques of inactivated diagnosis, partial discharge and $tan{\delta}$, have been adopted to diagnoze the operating characteristics of cables, but it is not so easy to find out problems in cables in an inactive state before the cable accident happens. In this paper, we did a research on the 6.6kV high-power cables, installed at Korean Western Power Station Co., Ltd. in order to diagonize the cables, playing a major role at the station. We have developed an equipment to measure an insulation resistance based on the temperature and current of the cable. By installing the system in a power station, we could find abnormal status for evaluation of the lifetime. In the short term, by analyzing the data, we apply the research result to the diagnosis and evaluation of the 6.6kV power cables. In the long run, however, we plan to reduce the cost of the installation and operation of cable systems at power stations.

• Journal of Microbiology and Biotechnology
• /
• v.32 no.6
• /
• pp.681-698
• /
• 2022

The Nile tilapia Oreochromis niloticus, Atlantic salmon Salmo salar, rainbow trout Oncorhynchus mykiss, olive flounder Paralichthys olivaceus, common carp Cyprinus carpio, grass carp Ctenopharyngodon idella and rohu carp Labeo rohita are farmed commercially worldwide. Production of these important finfishes is rapidly expanding, and intensive culture practices can lead to stress in fish, often reducing resistance to infectious diseases. Antibiotics and other drugs are routinely used for the treatment of diseases and sometimes applied preventatively to combat microbial pathogens. This strategy is responsible for the emergence and spread of antimicrobial resistance, mass killing of environmental/beneficial bacteria, and residual effects in humans. As an alternative, the administration of probiotics has gained acceptance for disease control in aquaculture. Probiotics have been found to improve growth, feed utilization, immunological status, disease resistance, and to promote transcriptomic profiles and internal microbial balance of host organisms. The present review discusses the effects of single and multi-strain probiotics on growth, immunity, heamato-biochemical parameters, and disease resistance of the above-mentioned finfishes. The application and outcome of probiotics in the field or open pond system, gaps in existing knowledge, and issues worthy of further research are also highlighted.

• Journal of Korea Multimedia Society
• /
• v.12 no.8
• /
• pp.1120-1127
• /
• 2009

The commensurate number of the attacks and infringement targeting a vulnerability of the game service has been increasing constantly, due to the dramatic growth and expansion of the impact of the game industry. However, there exist no subsequent researches for the differentiated technology, which is to prevent the reverse function of the game service. Therefore, in this study, we examined the current status of infringement toward online game services which are provided in the market currently and designed the proper technical measures for a manipulation of the game service which is the most vulnerable part. We have encrypted an execution file and decrypted it in real time process. Furthermore, we conducted debugging, disassemble, and prevented a its own memory dump, also concealed the information to overcome the module dependency to preclude a manipulation.

• Journal of Semiconductor Engineering
• /
• v.1 no.1
• /
• pp.57-63
• /
• 2020

Complementary metal-oxide-semiconductor (CMOS) technology is now facing a power scaling limit to increase integration density. Since 1970s, multi-valued logic (MVL) has been considered as promising alternative to resolve power scaling challenge for increasing information density up to peta-scale level by reducing the system complexity. Over the past several decades, however, a power-scalable and mass-producible MVL technology has been absent so that MVL circuit and system implementation have been delayed. Recently, compact MVL device researches incorporating multiple-switching characteristics in a single device such as 2D heterojunction-based negative-differential resistance (NDR)/transconductance (NDT) devices and quantum-dot/superlattices-based constant intermediate current have been actively performed. Meanwhile, wafer-scale, energy-efficient and variation-tolerant ternary-CMOS (T-CMOS) technology has been demonstrated through commercial foundry. In this review paper, an overview for MVL development history including recent studies will be presented. Then, the status and its future research direction of MVL technology will be discussed focusing on the T-CMOS technology for peta-scale information processing in semiconductor chip.

• Weed & Turfgrass Science
• /
• v.7 no.2
• /
• pp.166-169
• /
• 2018

Repeated use of ACCase inhibiting herbicides for a long time has resulted in increases of resistant Echinochloa oryzicola populations in paddy fields in middle west area of Korea. This study aims to investigate current status of herbicide resistant E. oryzicola in Gyeongsangnam-do, in which there is less information about herbicide resistance. For resistance frequency and dose-response study, seeds from 100 individual plants of E. oryzicola in Gyeongsangnam-do were collected and tested with cyhalofop-butyl. Seven percent of plants from Gyeongsangnam-do was resistant at a recommended rate of cyhalofop-butyl. $GR_{50}$ values (herbicide rates required to reduce plant growth 50%) for one representative resistant populations and five susceptible populations were $738g\;a.i.\;ha^{-1}$ and 66-234 (average 147)$g\;a.i.\;ha^{-1}$, respectively, indicating average 5 times difference in resistance. Although lower rate of frequency of herbicide resistance in Gyeongsangnam-do than in Jeollabuk-do, increases of herbicide resistance are expected in this area because of increases of direct seeded rice fields and increases of dependence on a specific herbicide. Therefore, it is necessary to monitor herbicide resistance regularly and conduct integrated herbicide resistance management in this area.

• Molecules and Cells
• /
• v.42 no.7
• /
• pp.503-511
• /
• 2019

As sessile organisms, plants have developed sophisticated system to defend themselves against microbial attack. Since plants do not have specialized immune cells, all plant cells appear to have the innate ability to recognize pathogens and turn on an appropriate defense response. The plant innate immune system has two major branches: PAMPs (pathogen associated molecular patterns)-triggered immunity (PTI) and effector-triggered immunity (ETI). The ability to discriminate between self and non-self is a fundamental feature of living organisms, and it is a prerequisite for the activation of plant defenses specific to microbial infection. Arabidopsis cells express receptors that detect extracellular molecules or structures of the microbes, which are called collectively PAMPs and activate PTI. However, nucleotidebinding site leucine-rich repeats (NB-LRR) proteins mediated ETI is induced by direct or indirect recognition of effector molecules encoded by avr genes. In Arabidopsis, plasmamembrane localized multifunctional protein RIN4 (RPM1-interacting protein 4) plays important role in both PTI and ETI. Previous studies have suggested that RIN4 functions as a negative regulator of PTI. In addition, many different bacterial effector proteins modify RIN4 to destabilize plant immunity and several NB-LRR proteins, including RPM1 (resistance to Pseudomonas syringae pv. maculicola 1), RPS2 (resistance to P. syringae 2) guard RIN4. This review summarizes the current studies that have described signaling mechanism of RIN4 function, modification of RIN4 by bacterial effectors and different interacting partner of RIN4 in defense related pathway. In addition, the emerging role of the RIN4 in plant physiology and intercellular signaling as it presents in exosomes will be discussed.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2000.05a
• /
• pp.45-51
• /
• 2000

According to the research of the cultivation result on the spot farmers for 5 years in order to investigate its cultivation conditions and problems of Lycium chinense Mill, the development of the variety with early mature, pest tolerance, and high yielding is urgent and it is call for the development of rooted cutting cultivation by testing of bed soil, growth regulator and cutting times. The development of cultivation method with planting year, planting density, supplementary period and amounts of supplementary of Lycium chinense Mill planted in growing field are required and for the disease and the effective control of disease and insect pest resistance is needed by auxotrophic fertilizing and organic agricultural method, met by agricultural chemicals.

• International Journal of High-Rise Buildings
• /
• v.12 no.3
• /
• pp.209-214
• /
• 2023

Seismic performance-based design methods are widely used in the field of engineering. This paper introduces the current status of seismic performance-based design methods for high-rise buildings in China, and summarizes latest advancements in seismic performance-based design methods for high-rise buildings in China, with a focus on the design methods based on predetermined yield mode and the design methods based on member ductility requirements. Finally, the development direction of seismic performance-based design method for high-rise buildings is prospected.

• Journal of Powder Materials
• /
• v.28 no.2
• /
• pp.164-172
• /
• 2021

Titanium is the ninth most abundant element in the Earth's crust and is the fourth most abundant structural metal after aluminum, iron, and magnesium. It exhibits a higher specific strength than steel along with an excellent corrosion resistance, highlighting the promising potential of titanium as a structural metal. However, titanium is difficult to extract from its ore and is classified as a rare metal, despite its abundance. Therefore, the production of titanium is exceedingly low compared to that of common metals. Titanium is conventionally produced as a sponge by the Kroll process. For powder metallurgy (PM), hydrogenation-dehydrogenation (HDH) of the titanium sponge or gas atomization of the titanium bulk is required. Therefore, numerous studies have been conducted on smelting, which replaces the Kroll process and produces powder that can be used directly for PM. In this review, the Kroll process and new smelting technologies of titanium for PM, such as metallothermic, electrolytic, and hydrogen reduction of TiCl₄ and TiO₂ are discussed.