• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1266-1268
• /
• 2004

This is a thesis that a quarter-brick size of 100W class open-frame type on board power module comprising telecommunication application is reported. The input voltage is established between 36 and 75 in range in order for power module to be utilized for the telecommunication application, and output were set at 3.3V and 30A. A number of parts used for transformer, inductor, and hit sink are composed of PCB in order for DC-DC converter to be lowered below 8 mm. A constant current control circuit was annexed to the system as well as basic protection prototypes such as over-voltage, over-current, and over-temperature were well considered to enhance more credibility, and were tested. As a result, high circuit performance and credibility turned out to be significant.

• Journal of Bio-Environment Control
• /
• v.26 no.4
• /
• pp.291-296
• /
• 2017

This study was conducted to evaluate the influence of early defoliation on photosynthesis and carbohydrate reserves when the source leaves of 'Fuji'/M9 apple (Malus domestica Borkh.) trees were removed during the growing period. Bud regrowth rates of 80%, 50% defoliation and non-defoliation treatments were significantly different 82.7%, 45.9% and 2.1% respectively at 30 days after treatment. In all treatments, sucrose and starch concentrations in remaining leaves decreased non-significantly during the 14-day period. No significant changes were observed for total soluble carbohydrates in non-defoliation and 50% defoliation. However, in 80% defoliated treatments, concentrations of sorbitol and total soluble carbohydrates in remaining leaves declined steadily during the 14-day period. It is thought that high sink strength increases the requirements of carbohydrate from remaining leaves more than non-defoliated. The concentrations of starch in the roots tend to decrease non-significantly as percentage of defoliation increased. Photosynthesis of remaining leaves was monitored during the 14-day period after partial defoliation treatments. Net photosynthetic rates (Pn) and stomatal conductance were significantly enhanced in the 80% defoliation. The observed photosynthetic enhancement following partial defoliation may have been due to the enhancement of osmotic potential in leaves. These results were estimated that increasing of photosynthetic rate in the partial defoliation is due to the sink carbohydrate requirements for the current year's secondary growth of buds.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1876-1879
• /
• 2003

Due to the conventional half-bridge switch-mode converters for dc motor drive have been usually using unbalanced circuit topologies which generate common-mode currents through parasitic capacitors distributed between the ground and the dc motor frame such as the heat-sink of switching devices or the frame of the dc motor. This paper describes methods that cancel common-mode current generated in half-bridge switch-mode converters by using circuit balancing technique. The circuit balancing is to make the noise pickup or occurring in both conductor lines, signal and return pathes, is equal in amplitude and opposite in phase so that it will be canceled out in the ground plane. The common-mode current cancellation in the proposed converter is confirmed by experimental results.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.10
• /
• pp.79-86
• /
• 1994

Gain-guided broad-area single quantum well separate confinement heterostructure diode lasers have been fabricated from structures grown by metal organic vapor phase epitaxy. The active layer of the epi-structure is InGaAs emitting 962-965nm and the guiding layer GaAs. The channel width is fixed to 150${\mu}$m and the cavity length varys within the range of 300~800${\mu}$m. For uncoated LD's, the output power of 0.7W has been obtaained at a pulsed current level of 2A, which results about 60% external quantum efficiency. The threshold current density is 200A/cm$^{2}$ for the cavity lengths of 800.mu.m LD's. The stain effect upon the transparent current density has been observed. The internal quantum efficiency is expected to be 88% and the internal loss to be 18$cm^{-1}$. The beam divergence has been measured to be 7$^{\circ}$to lateral and 40$^{\circ}$to transverse direction. finally, 1.2W continuous-wave output power has been obtained at a current level of 2A for AR/HR coated LD's die-bonded on Cu heat-sink and cooled by TEC.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.4
• /
• pp.87-96
• /
• 2007

In this study, a Ridge Distinction Program was developed to improve the elevation standard, which is one of standards for mountainous districts conversion permission regulated by the Management of Mountainous Districts Act. To distinguish mountainous districts from other land types, this program assumed that the lower end of the mountainous districts is the outlet points where catchment size is 30ha. Also the program used the halfway line between the ridge and the lower end of the mountainous districts to recognize the upper slope areas. To prevent potential errors within the classification process, the areas that were classified as non-mountainous districts by the current forest type map were removed. According to the classification results by using the developed program, the 58% of the mountainous districts ($696,300m^2$) was classified into the upper slope area, while the only 3% of the mountainous districts ($30,956m^2$) were classified by adopting the current standards for the mountainous districts conversion permission. This result shows that the size of the upper slope areas tends to be altered by the standards defining the area. Therefore, for better acceptance of the Ridge Distinction Program in the associated fields, it is necessary to prove the effectiveness of the program and to revise the current standards for the mountainous districts conversion permission.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3B
• /
• pp.311-319
• /
• 2006

A bed level change model(SED-FLUX) is introduced based on the realistic sediment transport process including bed load and suspended load behaviours at the bottom boundary layer. The model SED-FLUX includes wave module, hydrodynamic module and sediment transport and diffusion module that calculate suspended sediment concentration, net sediment erosion flux($Q_s$) and bed load flux. Bed load transport rate is evaluated by the van Rijn's TRANSPOR program which has been verified in wave-current fields. The net sediment erosion flux($Q_s$) at the bottom is evaluated as a source/sink term in the numerical sediment diffusion model where the suspended sediment concentration becomes a verification parameter of the $Q_s$. Bed level change module calculates a bed level change amount(${\Delta}h_{i,j}$) and updates a bed level. For the model verification the limit depth of the bed load transport is compared with the field experiment data and some formula on the threshold depth for the bed load movement by waves and currents. This model is applied to the beach profile changes by waves, then the model shows a clear erosion and accumulation profile according to the incident wave characteristics. Finally the beach evolution by waves and wave-induced currents behind the offshore breakwater is calculated, where the model shows a tombolo formation in the landward area of the breakwater.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1349-1358
• /
• 2009

Because of the limitation of supporting power, the current WSN(Wireless Sensor Network) Technologies whose one of the core attributes is low power consumption are the best solution for shipping container networking in stack environment such as on vessel. So it is effective to use the Wireless Sensor Network Technology. In this case, many nodes join in the network through a sink node because there are difficulties to get big money and efforts to set up a lot of sink node. It needs clustering-based proactive protocol to manage many nodes. But it shows low reliability because they have effect on radio frequency in metal obstacle environments(interference, distortion, reflection, and etc) like the intelligent container. In this paper, we proposed an improved Modified LEACH Protocol for stableness radio frequency environment. In the proposed protocol, we tried to join the network and derived stable topology composition after the measuring of link quality. Finally, we verified that the proposed protocol is composing more stable topology than previously protocol in metal obstacle environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6B
• /
• pp.342-349
• /
• 2007

Clustering protocol of Wireless sensor networks(WSNs) not only reducing the volume of inter-node communication by the nodes's data aggreation but also extending the nodes's sleep times by cluster head's TDMA-schedule coordination. In order to extend network lifetime of WSNs, we propose ECS algorithm to select cluster-head using three variables. It consists of initial and current energy of nodes, round information and total numbers which have been selected as cluster head until current round.

• Tunnel and Underground Space
• /
• v.27 no.6
• /
• pp.366-376
• /
• 2017

In this paper, we investigated the subsidence possibility and countermeasures according to the current mining method through investigation of the subsidence condition in operation mine. Most of the metal mine were broken, investigating to subsidence pattern of the Sink-hole. Coal mines are becoming more and more deep, investigating to Trough type subsidence patterns in existing mining areas. History of nonmetallic mines have not been developed for over 30 years, but large and small ground deformation problems have been investigated. Mining also has ground subsidence functionality due to time dependence by relying more heavily on empirical methods than technical methods. Therefore, it is necessary to carry out the various researches on systematic development method and prevention of subsidence of nonmetallic mines.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.3
• /
• pp.575-580
• /
• 2010

This paper is to design an optimum power conversion device for the system required for development of a low cost 3-phase power inverter. For this purpose, in order to meet with endurance required by the industry, failure mode is standardized to guarantee lifetime of a power semiconductor by monitoring real time power loss and to facilitate failure mode analysis. As normality of heat loss of a power semiconductor is identified remaining in a certain range by comparing heat rise slope between that is calculated by using average current or average loss and that is measured at a heat sink, its feasibility is confirmed by experiment.