• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6C
• /
• pp.231-240
• /
• 2011

Various pile load tests were carried out at Gwangyang district for 10 different piles in order to analyze the characteristcs of steel pile using high strength steel and high driving energy. Pile drivability results showed that PHC piles needed highest total blow count even with the shortest pile length and high strength steel pipe piles showed smallest total blow count eventhough driven to a more hard ground condition with longer pile length. Pile dynamic analysis results showed that for PHC pile and general steel pipe pile the allowable pile design load was decided by the allowable material strength but for high strength steel pipe pile the design load can be decided according to the ground bearing capacity. Static load test and load transfer test results showed that the pile design efficiency could be improved over 80% allowing lesser number of piles necessary for a more economical solution. Set-up effects was analyzed and regression equation for the site ground condition was derived. Bearing capacity was checked with widely used design equation and the limitation of current design method and future technology development on this subject is dicussed in this paper.

• Korean Security Journal
• /
• no.39
• /
• pp.355-386
• /
• 2014

Current business environment asks the fundamental changes about business security. The essences of these changes are that the security management of today's global business is important task of managers and the security practitioner is professional who needs very specialized education and training with business thinking. Rapid process of globalization of global village tore down the business limit that was restricted on the geological areas' limitation. Rapid business environments' change that is driving depends on development of science and technology with globalization needs new paradigm to keep business continuity. With the process of globalization, Korea, which importance is gradually increasing in the national economy, has trade dependent economic system, which keeps power of national economy through trade, so Korean economic tendency is accelerating. To keep competitiveness in global market, new strategy that is different with existing domestic business management is necessary. That is, capacity of coping with outside risk in domestic business management is established in some degree, but business activities in foreign countries faces at numerous unexpected risks that differ from country to country such as difference with the custom, changes of corporate governance etc. To cope with these new risks effectively, new paradigm for business risk is necessary. Especially, flexibility of thinking like new paradigm is necessary to cope with new security risk effectively. To cope with security risk that occurs in the new business environment effectively and competes against international company in global market, company management and members' changes of cognition about security and innovative changes in security policy is necessary. In the basement of these changes, there is expansion of business security tasks, improvement of report line, enhancement of professionalism and status of security officers, variation of hands-on workers and increasing of investment to the security etc.

• Journal of Korean Society of Transportation
• /
• v.27 no.4
• /
• pp.115-126
• /
• 2009

The lane-change behavior usually consists of discretionary lane-change and mandatory lane-change types. For the first type, drivers change lanes selectively to maintain their own driving condition and the second type is the case that the drivers must change the current lane, which can occur in recurrent congestion sections like merging and weaving sections. The mandatory lane-change behavior have a great effect on the operation condition of freeway. In this paper, we first generate data such as traffic volumes, speeds, densities, and the number of lane-change within the merging and weaving sections using the data of individual vehicle collected from time-lapse aerial photography. And then, the data is divided into the stable and congested flow by analyzing the speed variation pattern of individual vehicles. In addition, the number of lane-changing from ramp to mainline within every 30-meter interval is investigated before and after traffic congestion at study sites and the distribution of lane-changing at each 30-meter point is analyzed to identify the variation of lane-changing ratio depending on the stable and congested flows. To recognize the effect of mainline flow influenced by ramp flow, this study also analyzes the characteristics of the lane-changing distributions within the lanes of mainline. The purpose of this paper is to present the basic theory to be used in developing a lane-changing model at the merging and weaving sections on freeways.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.72-72
• /
• 2012

Lithium rechargeable batteries have been widely used as key power sources for portable devices for the last couple of decades. Their high energy density and power have allowed the proliferation of ever more complex portable devices such as cellular phones, laptops and PDA's. For larger scale applications, such as batteries in plug-in hybrid electric vehicles (PHEV) or power tools, higher standards of the battery, especially in term of the rate (power) capability and energy density, are required. In PHEV, the materials in the rechargeable battery must be able to charge and discharge (power capability) with sufficient speed to take advantage of regenerative braking and give the desirable power to accelerate the car. The driving mileage of the electric car is simply a function of the energy density of the batteries. Since the successful launch of recent Ni-MH (Nickel Metal Hydride)-based HEVs (Hybrid Electric Vehicles) in the market, there has been intense demand for the high power-capable Li battery with higher energy density and reduced cost to make HEV vehicles more efficient and reduce emissions. However, current Li rechargeable battery technology has to improve significantly to meet the requirements for HEV applications not to mention PHEV. In an effort to design and develop an advanced electrode material with high power and energy for Li rechargeable batteries, we approached to this in two different length scales - Atomic and Nano engineering of materials. In the atomic design of electrode materials, we have combined theoretical investigation using ab initio calculations with experimental realization. Based on fundamental understanding on Li diffusion, polaronic conduction, operating potential, electronic structure and atomic bonding nature of electrode materials by theoretical calculations, we could identify and define the problems of existing electrode materials, suggest possible strategy and experimentally improve the electrochemical property. This approach often leads to a design of completely new compounds with new crystal structures. In this seminar, I will talk about two examples of electrode material study under this approach; $LiNi_{0.5}Mn_{0.5}O_2$ based layered materials and olivine based multi-component systems. In the other scale of approach; nano engineering; the morphology of electrode materials are controlled in nano scales to explore new electrochemical properties arising from the limited length scales and nano scale electrode architecture. Power, energy and cycle stability are demonstrated to be sensitively affected by electrode architecture in nano scales. This part of story will be only given summarized in the talk.

• Science of Emotion and Sensibility
• /
• v.22 no.4
• /
• pp.15-30
• /
• 2019

The reduction of traffic accidents is a primary potential benefit of autonomous vehicles (AVs). However, the prevalence of AVs also arouses a key question: to what extent should a human wrest control back from AVs? Specifically, in an unavoidable situation of emergency, should an AV be able to decide between the safety of its own passengers and endangered pedestrians? Should AV programming include well-accepted decision rules about actionsto take in hypothetical situations? The current study (N = 103) examined individual/situational variables that could perform critical decision-making roles in AV related traffic accidents. The individual variable of attitudes toward AVs was assessed using the Self-driving Car Acceptance Scale. To investigate situational influences on decisional processes, the study's participants were assigned to one of two groups: the achievement value was activated in one group and the benevolence value was triggered in the other through the use of a sentence completion task. Thereafter, participants were required to indicate who should be protected from injury: the passengers of the concerned AV, or endangered pedestrians. Participants were also asked to record the extent to which they intended to buy an AV programmed to decide in favor of the greater good according to Utilitarian principles. The results suggested that participants in the "achievement value: driver perspective" groupexpressed the lowest willingness to sacrifice themselves to save several pedestrians in an unavoidable traffic accident. This group of participants was also the most reluctant to buy an AV programmed with utilitarian rules, even though there were significant positive relationships between members' acceptance of AVs and their expressed intention to purchase one. These findings highlight the role of the decisional processes involved in the "achievement value" pertaining to AVs. The paper finally records the limitations of the present study and suggests directions for future research.

• Journal of Service Research and Studies
• /
• v.10 no.1
• /
• pp.17-31
• /
• 2020

Open banking, the global trend of the financial industry, is the driving force behind various innovations in the financial market in the future. The right policy direction and detailed tasks are important for triggering the differentiation and reunion of the financial industry. The purpose of this study is to investigate and analyze the background of open banking, domestic and international trends, and Korea's open banking policy. The policy directions and tasks for successful settlement and activation of open banking system are carefully suggested. Open banking is a policy to allow third party provider(TPP) access to bank accounts and open payment functions under the explicit consent of the customer. The opening of the open banking era is expected to begin competition and cooperation between banks and fintech companies in earnest, thus enhancing the competitiveness of the financial industry and contributing to the utility of financial consumers. To this end, policymakers should make every effort to advance open-ended financial settlement infrastructure, open banking legal grounds, and minimize side effects such as customer data leakage and poor financial system stability. Banks and fintech companies will need to focus on scattered customer financial information on a single platform and develop it into a convergence and discrimination of true financial services.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.7
• /
• pp.1-9
• /
• 2012

In this paper, resistance temperature detector (RTD) integrated into the LED package is proposed in order to solve the temperature dependence of LED's optical properties. To measure the package temperature in real time, the RTD type temperature sensor having excellent accuracy and linearity between temperature change and resistance change was adopted. A stable metallic film is required for long term reliability and stability of the RTD type temperature sensor. Therefore, deposition and annealing condition for the film were determined. Based on the determined condition, the RTD type temperature sensor with the sensitivity of about $1.560{\Omega}/^{\circ}C$ was fabricated inside the LED package. In order to configurate the LED package system keeping the constant brightness regardless of the temperature, additional conversion circuit and control circuit boards were fabricated and added to the fabricated LED package. The proposed system was designed to compensate the light intensity caused by temperature change using the variable duty rate of driving current. As a result, the duty rate of PWM signal which is the output signal of the configurated system was changed with the temperature change, and the duty rate was similarly varied with the target duty rate. Consequently, it was focused the fabricated RTD can be used for compensating the optical properties of LED and the LED package which exhibits constant brightness regardless of the temperature change.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.9 no.2
• /
• pp.58-67
• /
• 1995

The paper describes the variation of magnetic fields caused by the operation of induction motors. The measuring system consists of the self-integrating magnetic field sensor, amplifier, and active integrator. From the calibration experiments, the frequency bandwidth of the magnetic field measuring system ranges from 20[Hz] to 300[kHz] and sensitivity is 0.234(mV/$\mu\textrm{T}$]. The magnetic fields generated under steady state and starting operations of duction motor are recorded by the proposed measuring system, and the fast Fourier transformation(FFT) of the measured data is performed to analyze the harmonic components. A single pulsed magnetic field is strongly caused by direct starting the induction motor, and its peak value is greater than 5 times as compared with the steady state value. The long transient duration and high intensity originates from the large inductance and dynamic characteristic of the induction motor, During the steady state operation of induction motor, subharmonics of magnetic field components, which depend on the pole number of induction motor, are observed. The lower order power-line harmonics can be inferred from the voltage flicker and current ripple which are derived from the torque fluctuation of induction motor. In the case of the induction motor drived by inverter, the harmonics of magnetic field are much more than those caused by direct starting method and are found generally to increase with decreasing the driving frequency.

• Journal of IKEEE
• /
• v.21 no.4
• /
• pp.368-374
• /
• 2017

In this Paper, we developed a low power type LED security light using LED lighting that substitutes a 220[V] commercial power source for a solar cell module instead of a halogen or a sodium lamp. in addition, a PWM type drive control circuit is designed to minimize the heat generation problem and the drive current of the LED drive controller. in developed system, The light efficiency measurement value is 93.6[lm/W], and a high precision temperature sensor is used inside the controller to control the heat generation of the LED lamp. In order to eliminate the high heat generated from the LED lamp, it is designed to disperse quickly into the atmosphere through the metal insertion type heat sink. The heat control range of LED lighting was $50-55[^{\circ}C]$. The luminous flux and the lighting speed of the LED security lamp were 0.5[s], and the beam diffusion angle of the LED lamp was about $110[^{\circ}C]$ by the light distribution curve based on the height of 6[m].

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.1
• /
• pp.337-351
• /
• 2018

This paper discusses 5G IOT, Augmented Reality, Cloud Computing, Big Data, Future Autonomous Driving Vehicle technology, and presents 5G utilization of Pyeongchang Winter Olympic Games and Jeju Smart City model. The reason is that 5G is the main artery of the 4th industry.5G is the fourth industrial aorta because 5G is the core infrastructure of the fourth industrial revolution. In order for the AI, autonomous vehicle, VR / AR, and Internet (IoT) era to take off, data must be transmitted several times faster and more securely than before. For example, if you send a stop signal to LTE, which is a communication technology, to a remote autonomous vehicle, it takes a hundredth of a second. It seems to be fairly fast, but if you run at 100km / h, you can not guarantee safety because the car moves 30cm until it stops. 5G is more than 20 gigabits per second (Gbps), about 40 times faster than current LTE. Theoretically, the vehicle can be set up within 1 cm. 5G not only connects 1 million Internet (IoT) devices within a radius of 1 kilometer, but also has a speed delay of less than 0.001 sec. Steve Mollenkov, chief executive officer of Qualcomm, the world's largest maker of smartphones, said, "5G is a key element and innovative technology that will connect the future." With 5G commercialization, there will be an economic effect of 12 trillion dollars in 2035 and 22 million new jobs We can expect to see the effect of creation.