• 제목/요약/키워드: curing shrinkage

검색결과 292건 처리시간 0.028초

SBR Latex를 이용한 흙 포장의 재료특성 연구 (Study on the Effect of SBR Latex on the Properties of Soil Pavement)

  • 이상염;황성도;양성린
    • 한국도로학회논문집
    • /
    • 제16권5호
    • /
    • pp.73-82
    • /
    • 2014
  • PURPOSES : The purpose of this study is to determine the optimum addition rate of SBR latex through the evaluation of durability and strength of SBR latex applied soil pavement. Formerly used materials such as fly ash and cement in soil pavement had resulted in decreased durability due to micro crack by heat of hydration and shrinkage crack in winter. However, that agglutinated polymers help adhesion to aggregate increased comes up with preventing the crack opening when the number of capillary tubes of SBR latex get decreased in the hydration process of cement. Therefore, in this study, it is suggested that the evaluation of the field applicability of soil pavement be conducted through the performance lab test in terms of strength increment, adhesion improvement, and crack resistance based on SBR latex addition rate. METHODS : In order to evaluate the field applicability of soil pavement, SBR latex was added 0 to 3% by 1% increment, with fixed cement contents of 3% and 5%. The resistance of shear failure and crack of soil pavement were evaluated by performing the uniaxial compressive strength test and indirect tensile strength test at -20 and $20^{\circ}C$, respectively. RESULTSCONCLUSIONS : It was found out that from both tests, resistance of shear failure and crack were improved with increment of curing time, and especially more than 2% of SBR latex addition rate and 5% cement content gave better results.

시멘트 종류에 따른 초고성능 콘크리트의 특성에 관한 실험적 연구 (An Experimental Study on the Properties of UHPC with Different Types of Cements)

  • 박정준;강수태;류금성;고경택;김성욱;이장화
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
    • /
    • pp.345-348
    • /
    • 2008
  • 초고성능 콘크리트(UHPC)의 재료구성에서 시멘트는 다른 재료에 비해 가장 많은 양을 차지하고 있는데 자기수축이나 수화열 등의 문제와 특히 재령초기에 실시하는 고온양생이 시멘트 수화에 미치는 영향을 고려한다면 UHPC의 특성에 미치는 시멘트의 영향을 정확히 파악하여 적절한 시멘트를 선정해야할 필요가 있다. 따라서 이 논문은 시멘트 종류가 UHPC에 미치는 영향을 파악하기 위한 실험적 연구로서 국내에서 사용되는 포틀랜드 시멘트의 종류에 따른 초고성능 콘크리트의 유동성, 압축강도, 탄성계수의 특성을 검토하였다. 실험결과, 저열포틀랜드 시멘트 사용 시 보통포틀랜드 및 조강포틀랜드 시멘트 보다 유동성과 압축강도가 향상된 결과를 얻었다. 향후 보다 체계적인 연구를 통하여 시멘트 종류가 UHPC에 미치는 영향을 보다 체계적으로 검토할 예정이다.

  • PDF

수분함량에 따른 의치접착제의 확장성 관찰 (Spreadability observation of the denture adhesive by the amount of the water)

  • 김종문;최성민
    • 대한치과기공학회지
    • /
    • 제37권1호
    • /
    • pp.17-21
    • /
    • 2015
  • Purpose: In this study, Spreadability of denture adhesive in accordance with the saturation level of saliva, respectively, by using the resin plate and the glass was measured thickness and Spreadability. Methods: Examine the spreadability of denture adhesive in accordance with the saturation level of saliva, respectively, by using the resin plate and the glass was measured thickness and Spreadability. Also, by measuring the adhesive strength according to the amount of saliva, and the edentulous patients using denture adhesive and dry mouth patients attempt to provide clinical information of the denture adhesive. Therefore, by using the relatively low shrinkage cold curing resin, after fabricating specimen of plate form, for 7 days, it was immersed in water. Results: For the control group only denture adhesive, an artificial saliva for the experimental group were injected in $0.1m{\ell}$, $0.2m{\ell}$ and $0.3m{\ell}$ of the denture adhesive on the surface, experimental results of the investigation of the 10 times the tensile bond strength of the specimens in each group was obtained the following results. Conclusion: As the time to pressure increase in the same amount of saliva was found that the amount coming out of the denture adhesive, as the amount of saliva in the same pressure increase coming out of many denture adhesives. And the greater the pressure came out a lot of denture adhesives. Spreadability in measuring saliva contact with $0.1m{\ell}$ and $2m{\ell}$ and $3m{\ell}$ group pressured the diameter of the circular was the denture adhesive is small when compared to the group without adding the pressure of 2kg and 3kg put the saliva. The size of the circle is the same amount of saliva denture adhesive spread more pressure showed a greater increase.

저온 소성한 MgO 분말을 함유한 플라이애시 콘크리트의 장기재령에서의 내구특성 (Long-term Durability Characteristics of Fly ash Concrete Containing Lightly Burnt MgO Powder)

  • 장봉석;최슬우;이광명
    • 대한토목학회논문집
    • /
    • 제33권3호
    • /
    • pp.909-916
    • /
    • 2013
  • 저온에서 소성된 산화마그네슘 분말을 치환한 MgO 콘크리트는 장기적인 팽창성을 가진다. 또한 MgO의 수화반응이 느린 속도로 장기재령까지 일어나기 때문에 매스콘크리트의 온도수축을 효과적으로 보상할 수 있다. 따라서 저온 소성한 MgO는 매스콘크리트 구조물인 댐에 주로 적용되었다. 최근 수화열 저감을 위해 매스콘크리트에 많이 사용되는 플라이애시를 사용한 MgO 콘크리트의 팽창특성에 대한 연구가 진행되어 왔지만 이러한 콘크리트의 내구성에 관한 연구는 부족한 실정이다. 이 연구에서는 플라이애시 콘크리트에 저온 소성한 MgO 분말을 치환하여 MgO 분말 치환에 따른 장기재령에서의 내구특성을 확인하였다. 재령 360일까지 20, $50^{\circ}C$에서 수중 양생을 실시한 후 탄산화, 동결융해 및 염화물 확산, 황산염 침투 저항성을 평가하였다. 실험결과, MgO 분말을 치환한 시편에서 탄산화 저항성 및 염해 저항성, 황산염 침투 저항성이 다소 향상되는 것을 확인하였다. 반면 동결융해 저항성은 MgO 분말 치환에 거의 영향을 받지 않았다.

C12A7계 알루미나시멘트 및 아질산염을 사용한 저온환경 보수시공용 시멘트 모르타르의 특성 (Properties of Repair Cement Mortar with C12A7-based Alumina Cement and Nitrite for Low Temperature Curing)

  • 박정훈
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제21권4호
    • /
    • pp.124-131
    • /
    • 2017
  • 본 연구는 저온환경에서 경화가 가능한 알루미나시멘트 및 아질산염을 사용한 보수용 시멘트 모르타르의 기초성능을 평가하고자 하였다. 이를 위해 국내 건설현장에서 사용되고 있는 보수용 모르타르를 조사 및 선정하였으며, 이를 대상으로 알루미나시멘트, 아질산염을 치환하여 혼입량 조절에 따른 실험평가를 실시하였다. 그 결과, 알루미나시멘트, 아질산염을 보수용 모르타르에 치환하여 사용할 경우 초기 강도발현이 증진되었다. 또한 내화학성이 개선되었고 수축거동이 감소하였으며 동결융해에 대한 저항성이 증대되었다. 알루미나시멘트와 아질산염을 2:1의 비율로 7.5% 치환하여 외부구조물에 시공한 결과 표면상태가 5개월 이상 양호하게 유지되었으며, 실제 외부구조물에 사용성이 우수한 것으로 판단된다.

Influence of Milk Co-precipitates on the Quality of Restructured Buffalo Meat Blocks

  • Kumar, Sunil;Sharma, B.D.;Biswas, A.K.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제17권4호
    • /
    • pp.564-568
    • /
    • 2004
  • Restructuring had made it possible to utilize lower value cuts and meat trimmings from spent animals by providing convenience in product preparation besides enhancing tenderness, palatability and value. Milk co-precipitates (MCP) have been reported to improve the nutritional and functional properties of certain meat products. This study was undertaken to evaluate the influence of incorporation of milk co-precipitates at four different levels viz. 0, 10, 15 and 20% on the quality of restructured buffalo meat blocks. Low-calcium milk co-precipitates were prepared from skim milk by heat and salt coagulation of milk proteins. Meat chunks were mixed with the curing ingredients and chilled water in a Hobart mixer for 5 minutes, followed by addition of milk co-precipitates along with condiments and spice mix and again mixed for 5 minutes. Treated chunks were stuffed in aluminium moulds and cooked in steam without pressure for 1.5 h. After cooking, treated meat blocks were compared for different physico-chemical and sensory attributes. Meat blocks incorporated with 10% MCP were significantly better (p<0.05) than those incorporated with 0, 15 and 20% MCP in cooking yield, percent shrinkage and moisture retention. Sensory scores were also marginally higher for meat blocks incorporated with 10% MCP than product incorporated with 15 and 20% MCP, besides being significantly higher than control. On the basis of above results 10% MCP was considered optimum for the preparation of restructured buffalo meat blocks. Instrumental texture profile analysis revealed that meat blocks incorporated with 10% MCP were significantly better (p<0.05) in hardness/ firmness than control although, no significant (p>0.05) differences were observed in cohesiveness, springiness, gumminess and chewiness of both type of samples.

폴리우레탄 액상고무를 혼합한 불포화 폴리에스테르 모르타르의 인성 증진효과 (Toughness Improvement of Unsaturated Polyester Mortars Blended with Polyurethane Liquid Rubber)

  • 최영준;박준철;박정민;김화중
    • 콘크리트학회논문집
    • /
    • 제14권3호
    • /
    • pp.283-290
    • /
    • 2002
  • 일반적으로 불포화 폴리에스테르 모르타르 및 콘크리트는 강도가 우수하고 내약품성이 좋지만, 취성적이어서, 내충격성이 요구되는 용도로는 사용하기 어렵다. 그러므로, 본 연구에서는 재생골재와 불포화 폴리에스테르 액상수지를 사용한 바닥마감재를 개발하기 위해 불포화 폴리에스테르 모르타르의 취성을 개선시켜보고자 하였다. 불포화 폴리에스테르 모르타르의 취성을 개선하기 위한 재료로 폴리우레탄 액상고무를 사용하였으며, 폴리올의 분자량과 폴리우레탄 액상고무의 치환율에 따른 모르타르의 특성을 검토했다. 실험결과, 폴리우레탄 액상고무의 사용에 따라 불포화 폴리에스테르 모르타르의 점도가 증가하였고, 경화수축은 감소하였다. 그리고, 모르타르내에 생성된 고무입자에 의해 압축강도 및 휨강도는 다소 저하하였지만, 내충격성이 향상되고, 휨파괴시험결과에서 파괴하중이후에도 급격한 파괴를 보이지 않는 결과를 얻을 수 있었다. 따라서, 본 연구의 결과는 폴리올의 분자량 2000, 3000인 폴리우레탄 액상고무를 불포화 폴리에스테르 모르타르에 사용하여 취성의 개선효과를 얻을 수 있다는 것을 제시하고 있다.

훈제 처리가 가열소지에 미치는 영향 (The effect of smoking on the quality boiled sausage)

  • 정청송;유상훈
    • 한국관광식음료학회지:관광식음료경영연구
    • /
    • 제12권2호
    • /
    • pp.1-41
    • /
    • 2001
  • The effect of smoking on the quality sausage Sausages were prepared from beef, port, chickens, games, fish and shellfish with polyphosphate salt and spices. Sausage history goes back to 3,000 years of age. The procedure of sausage 1) Meat Curing 2) Meat Control 3) Add Spices 4) Permissible Ingredients 5) Grinding 6) Mixing Emulsion 7) Stuffing 8) Showing 9) Smoking 10) Cooking 11) Drying 12) Packaging Sausage Product to get information on the effect of smoking onto the quality of meat produces. Sausage was smoked under a given conditions. Smoking was conducted as 35f$^{\circ}C$to 6$0^{\circ}C$ the related humidity of smokehouse was still at 60 to 70 percent. Results are as follows: 1. The Penetrated smoke in sausage was prolonged < p.<0.02 when sausage was smoked 2hours at 60~$65^{\circ}C$ the penetrated amount of free acetone in sausage was 0.5mg%. 2. Peroxide value of sausage as heating treatment both at 3$0^{\circ}C$ and at 5$0^{\circ}C$ was prolonged. 3. When sausage was heated at 3$0^{\circ}C$, bacteria of sausage increased In number while at 60~$65^{\circ}C$ bacteria of sausage increased In number fourteen hours. 4. When sausage was treated with smoking the distribution of free amino acids in sausage was changed markedly. 5. The longer smoking time of the products was the higher the content. 6. In case of oak wood smoke flavoring all of test samples. 7. Rapid decrease of does-response mutagenic curve of the smoke flavoring of oak wood and apple wood by in the peak of curve and phenol in the smoke flavoring. Continuous efforts are required to make sausages easily in the butcher shops and in the restaurants. 8. Sausage texture evaluation has 13 rules. It is Elasticity, Surface Moisture, Surface Smoothness, Center Hardness, Skin Toughness, Cohesiveness, Denseness, Moisture Release, Cohesiveness of Mass, Lumpiness, Graininess (of Contents), Skin separation, Oiliness and sensory 11 rules evaluation is color, texture, mold, flavor, sweet test, salty, sourness, bitter, and savory taste. 9. Smoked, component, peroxide value, bacteria, color, free amino acid, tenderness, flavor, shrinkage are important values.

  • PDF

광경화성 아크릴레이트 복합체를 이용한 나노 임프린트 패턴 형성 (Nanoimprinting Pattern Formation Using Photo-Curable Acrylate Composites)

  • 김성현;박선희;문성남;이우일;송기국
    • 폴리머
    • /
    • 제36권4호
    • /
    • pp.536-541
    • /
    • 2012
  • 실리카 입자가 첨가된 광경화성 임프린트용 복합체를 제조하여 실리카 양에 따른 경화 특성과 전사된 수 백 나노미터 크기의 임프린트 패턴 형성에 관한 결함을 조사하였다. 상온에서 UV 경화한 임프린트 레진은 실리카 양이 증가할수록 탄성률이 커지고 수축률이 줄어드는 것을 알 수 있었다. 그러나 실리카 입자의 양이 7 wt% 이상인 경우 전사된 나노기둥끼리 서로 달라붙는 결함을 보이는데, 이는 실리카 입자가 광반응을 방해하여 임프린트 레진의 경화가 불완전하게 되면서 광경화된 레진의 점성이 증가했기 때문이다. 임프린트 레진에 실리카 입자를 충전제로 사용하면 경화 후 나노 패턴의 강도를 증가하여 형태를 유지하는데 도움이 되지만, 실리카 양이 7 wt% 이상이 되면 오히려 광반응 전환율이 떨어져 임프린트 공정에 의한 나노 패턴의 전사가 어려운 것을 알 수 있다.

셀룰로오즈 섬유 함유 콘크리트의 작업 성능 및 강도 평가 (Evaluation of Workability and Strength in Concrete with Cellulose Fibers)

  • 류화성;이상석;권성준
    • 한국건설순환자원학회논문집
    • /
    • 제8권2호
    • /
    • pp.198-203
    • /
    • 2020
  • 콘크리트는 초기에 인장강도가 확보되지 못하므로 건조수축과 같은 재료적인 균열이 발생하게 된다. 본 연구에서는 셀룰로오즈 섬유를 0.0 ~ 2.0% 혼입한 콘크리트를 대상으로 공기량, 슬럼프와 같은 작업성을 평가하였으며, 재령에 따른 압축 및 인장강도를 평가하였다. 혼입률이 증가할수록 1.0kg/㎥ 수준에서는 공기량 및 슬럼프에서 저하를 확인할 수 없었으며, 이러한 작업성은 2시간까지 유효하게 작용하였다. 강도 평가에서는 혼입률이 증가할수록 인장 및 압축강도가 개선되었으며, 압축강도의 경우 7 ~ 9%수준으로, 인장강도에서는 7 ~ 22% 수준으로 증가하였다. 인장강도에서 증가율이 상대적으로 크게 평가되었는데, 이러한 효과는 균열저항성에 크게 도움을 주리라 판단된다. 본 연구를 통하여 2분간의 혼입 시간, 셀룰로오즈 섬유 1.0kg/㎥의 혼입률 수준이면 120분간 작업성에 큰 영향이 없으리라 평가된다.