• The Journal of Engineering Geology
• /
• v.23 no.4
• /
• pp.375-380
• /
• 2013

The concept of safe yield places an emphasis on balancing groundwater withdrawal with groundwater recharge but ignores naturally occurring groundwater discharge. Because streams and their alluvial aquifers are closely linked in terms of water supply and water quality, to be properly understood and managed they must be considered together. Therefore, some districts in Kansas have reevaluated their safe-yield policies to account for natural groundwater discharge and stream-aquifer interactions by amending their safe-yield regulations to include a portion of baseflow as the minimum desirable streamflow (MDS). This study proposes a modified safe-yield policy in which the drought flow is chosen as the MDS. Baseflow separation was conducted from streamflow hydrograph and the results are presented as a flow-duration curve. The exploitable groundwater can be determined by subtracting MDS from the cumulative baseflow. This method was tested in the Musimcheon watershed, which was validated for streamflow using the SWAT-K model. The annually averaged exploitable groundwater in the whole watershed was estimated to be 86 mm. The exploitable groundwater amounts were also estimated for each subwatershed in the Musimcheon watershed.

• The Journal of Engineering Geology
• /
• v.28 no.1
• /
• pp.47-59
• /
• 2018

At present, there has been a wide range of studies on debris flow in Korea, more specifically, on rainfall characteristics that trigger debris flow including rainfall intensity, rainfall duration, and preceding rainfall. the prediction of landslide / debris flow relies on the criteria for landslide watch and warning by the Korea Forest Service (KFS, 2012). Despite this, it has been found that most incidents of debris flow were caused by rainfall above the level of landslide watch, maximum hourly rainfall, extensive damage was caused even under the watch level. Under these circumstances, we calculated a rainfall triggering index (RTI) using the main factors that trigger debris flow-rainfall, rainfall intensity, and cumulative rainfall-to design a more sophisticated watch / warning criteria than those by the KFS. The RTI was classified into attention, caution, alert, and evacuation, and was assessed through the application of two debris flow incidents that occurred in Umyeon Mountain, Seoul, and Cheongju, Inje, causing serious damage and casualties. Moreover, we reviewed the feasibility of the RTI by comparing it with the KFS's landslide watch / warning criteria (KFS, 2012).

• Journal of Sensor Science and Technology
• /
• v.9 no.3
• /
• pp.163-170
• /
• 2000

Optical frequency modulated fiber optic interferometric sensor was developed to sense the mechanical quantities, such as displacement, strain, force etc. It has been difficult to distinguish whether the increase of the mechanical quantities or the decrease of the quantities measured by the conventional fiber optic interferometric sensors because their signals only have a sinusoidal wave pattern related to the change of mechanical quantities. In this study, in order to measure the mechanical quantifies with the distinction of the changing direction of the quantities, the fiber of optic Michelson interferometric sensor was simply constructed by the laser light modulated with saw tooth wave pattern. The output signal of the sensor was controlled as the sinusoidal wave. The signal processing was based on the counting of the wave number of the output signal during constant time duration. The strain was determined by the cumulative value of the wave number producted by the gage factor. In order to verify the strain measurement capability of this sensor, the strain increase-decrease test was performed by universal testing machine installed with the aluminum specimen bonded with the fiber optic sensor and electrical strain gage. In the result of the test, the strain from the fiber optic sensor had a good agreement with the values from the electrical strain gage.

• Journal of Korea Soil Environment Society
• /
• v.5 no.1
• /
• pp.75-83
• /
• 2000

Recently, many landfills are constructed by using geosynthetics with earth materials. Geotextiles in geosynthetics are applied for the various purposes such as filters of the leachate collection and removal system and protectors of geomembrane liner. However geotextiles can be exposed to direct sunlight during the construction of landfill for several months. As you know the exposure of polymers to sunlight can be a major source of degradation of them. This study is to suggest a criteria on the installation of heavy weight geotextiles at the landfill. For this purpose, several different geotextiles were evaluated by outdoor exposure at two different locations and under the different seasons for one and half years. As the results of outdoor exposure, polypropylene geotextiles with 500g/$m^2$ and 700g/$\textrm{m}^2$were maintained around 40% of the initial strength during for one and half years. However, the polypropylene geotextile of 1000g/$\textrm{m}^2$showed 65% of the retained strength for the same duration of exposure. The retained strength of all polypropylene geotextile reduced dramatically with the cumulative sunshine radiation on a horizontal surface of around 1500MJ/$\textrm{m}^2$.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.7
• /
• pp.690-698
• /
• 2010

Contamination of groundwater resources by organic chemicals has become an issue of increasing environmental concern. Surfactant-enhanced aquifer remediation (SEAR) is widely recognized as one of the most promising techniques to remediate organic contaminations in-situ. Solutions of surfactant or surfactant with polymer are used to dramatically expedite the process, which in turn, may reduce the treatment time of a site compared to use of water alone. In the design of surfactant-based technologies for remediation of organic contaminated aquifers, it is very important to have a considerable analysis using extensive numerical simulations prior to full-scale implementation. This study investigated the formation and flow of microemulsions during SEAR of organic-contaminated aquifer using the finite difference model UTCHEM, a three-dimensional, multicomponent, multiphase, compositional model. The remediation process variables considered in this study were the sequence of injection fluids, the injection and extraction rate, the concentrations of polymer in surfactant slug and chase water, and the duration of surfactant injection. For each variable, temporal changes in injection and production wells and spatial distributions of relative saturations in the organic phase were compared. Cleanup time and cumulative organic recovery were also quantified. The study would provide useful information to design strategies for the remediation of nonaqueous phase liquid-contaminated aquifers.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.2
• /
• pp.126-135
• /
• 2015

Increase of delivery effect of pollutant loads and surface runoff due to urbanization of catchment area results in serious environmental problems in receiving urban streams. This study aims to develop integrated stormwater management system to assist efficient urban stream flow and water quality control using information from the Storm Water Management Model (SWMM), real time water level and quality monitoring system and remote or automatic treatment facility control system. Based on field observations in the study site, most of the pollutant loads are flushed within 4 hours of the rainfall event. SWMM simulation results indicates that the treatment system can store up to 6 mm of cumulative rainfall in the study catchment area, and this means any type of normal rainfall situation can be treated using the system. Relationship between rainfall amount and fill time were developed for various rainfall duration for operation of stormwater treatment system in this study. This study can further provide inputs of river water quality model and thus can effectively assist integrated water resources management in urban catchment and streams.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.21
• /
• pp.9301-9305
• /
• 2014

Background: Pain is one of the most terrifying symptoms for cancer patients. Although most patients with cancer pain need opioids, complete relief of pain is hard to achieve. This study investigated the factors influencing persistent pain-free survival (PPFS) and opioid efficiency. Materials and Methods: A prospective study was conducted on 100 patients with cancer pain, hospitalized at the medical oncology clinic of Akdeniz University. Patient records were collected including patient demographics, the disease, treatment characteristics, and details of opioid usage. Pain intensity was measured using a patient self-reported visual analogue scale (VAS). The area under the curve (AUC) reflecting the pain load was calculated from daily VAS tables. PPFS, the primary measure of opioid efficacy, was described as the duration for which a patient reported a greater than or equal to two-point decline in their VAS for pain. Predictors of opioid efficacy were analysed using a multivariate analysis. Results: In the multivariate analysis, PPFS was associated with the AUC for pain (Exp (B)=0.39 (0.23-0.67), P=0.001), the cumulative opioid dosage used during hospitalisation (Exp (B)=1.00(0.99-1.00), P=0.003) and changes in the opioid dosage (Exp (B)=1.01 (1.00-1.01), P=0.016). The change in VAS score over the standard dosage of opioids was strongly associated with current cancer treatment (chemotherapy vs. others) (${\beta}=-0.31$, T=-2.81, P=0.007) and the VAS for pain at the time of hospitalisation (${\beta}=-0.34$, T=-3.07, P= 0.003). Conclusions: The pain load, opioid dosage, concurrent usage of chemotherapy and initial pain intensity correlate with the benefit received from opioids in cancer patients.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.1
• /
• pp.31-38
• /
• 2008

The objective of this work is to study transdermal delivery of levodopa using iontophoresis and evaluate various factors which affect the transdermal transport. Levodopa is unstable in aqueous solution, and, in order to establish a stable condition for levodopa for the duration of experiment, we investigated the stability of levodopa in aqueous solutions of different pHs with/without the addition of dextrose or the application of current. Using stable aqueous solution, we have studied the effect of pH, polarity and penetration enhancer (ethanol) on transdermal flux and compared the results. We also investigated the iontophoretic flux from hydroxypropyl cellulose (HPC) hydrogel. In vitro flux study was performed at $33^{\circ}C$, using side-by-side diffusion cell. Full thickness hairless mouse skin and rat skin were used for this work. Current densities applied were 0.4 or $0.6mA/cm^2$ and current was off after 6 hour application. Stability study showed that levodopa solution with a pH 2.5 or 4.5 maintained the initial concentration of levodopa for 24 hours with the addition of 5% dextrose. However, at pH 9.5, levodopa was unstable and 30 to 40% of levodopa degraded within 24 hours, even with the addition of 5% dextrose. Hydrogel swollen with dextrose added levodopa solution maintained about 97% of the initial concentration of levodopa for 13 days, when stored in $4^{\circ}C$. The application of current did not affect the stability of levodopa in hydrogel. Flux study from levodopa solution with pH 2.5 showed that cathodal delivery of levodopa was higher than passive or anodal delivery. When the pH of the donor solution was 4.5, anodal delivery of levodopa was higher than passive or cathodal delivery. These results seem to indicate that electroosmosis plays more dominant role than electrorepulsion in the flux of levodopa at pH 2.5, and the reverse situation applies for pH 4.5. The passive flux was unexpectedly high for the ionized levodopa. Similar to the results from aqueous solution, cumulative amount of levodopa transported trom HPC hydrogel by cathodal delivery was significantly higher than passive or anodal delivery. The treatment of 70% ethanol cotton ball by scrubbing increased passive, anodal and cathodal flux, with the largest increase for anodal flux. These results indicate that iontophoretic delivery of zwitterion such as levodopa is much complicated than that can be expected from small ionic molecules with single charge. The results also indicate that the balance between electroosmosis and electrorepulsion plays a very important role in the transport through skin.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.9 no.2
• /
• pp.190-200
• /
• 2002

Purpose; The purpose of this study was to develop an instrument to measure sexual satisfaction in Korean adults. Method: Development of items for the instrument was done by a collecting, reorganizing, reducing and selecting process based on the literature. A total of 19 items were selected in this process. For evaluation of the appropriateness of the 19 items, questionnaires were given to an expert group consisting of 18 professionals (7 men and 11 women). Eighteen items having a response of 70% in 'very good' item or 'good' item were included as items for the instrument. With these 18 items, a 5 point Likert scale was developed, and reliability and validity tests of the scale were done. The subjects for the test were 1,127 Korean adults living in 11 areas in Korea, Data were collected from Dec. 1, 2000 to Feb. 28, 2001 and analyzed with SPSS/PC+ 10.0 program. Item analysis and factor analysis were used to assess the reliability and validity of the scale. Chronbach alpha and corrected item-total correlation were obtained to verify internal consistency, and principal component analysis with the varimax rotation was used to identify structure validity of the developed tool. Result: Reliability of the scale was .9503 and corrected item-total correlations of the items were distributed from .5208 to 7899. As a result of the factor analysis, the items were categorized into three factors. The cumulative variance of the three factors was 67.1%, and all of the variances of the factors were above 5%. Because factor 1 (8 items) indicated a special feeling of psychological satisfaction with sexual activity, it was named 'psychological factor'. Factor 2 (8 items) indicated a feeling of satisfaction in the interaction with sexual partner through communication and variation, therefore it was named 'interactional factor'. Factor 3 (2 items) was about the frequency and duration of sexual intercourse and indicated physical dimensions of satisfaction, so it was named 'physical factor'. The average score for sexual satisfaction of the 1,127 subjects was 65.32 (${\pm}12.71$), and histogram of the score showed a normal distribution with skewness - .425. Conclusion: Finally, a Korean Sexual Satisfaction Scale(KSSS) was accepted as a 5 point Likert scale with 18 items after the statistical test for reliability and validity. In conclusion, KSSS is a useful instrument which is valid and reliable can be used to understand the sexuality of Korean adults.

• Journal of Digital Convergence
• /
• v.11 no.11
• /
• pp.545-551
• /
• 2013

This study aimed to compare the effects of microcurrent stimulation and rest on the fatigue index by applying both to subjects who had accumulated fatigue after performing short-duration physical activity. The experiment was performed at S University from December 2012 to February 2013, on 22 healthy men in their 20s, who were right-handed, and without peripheral or musculoskeletal diseases. All subjects lifted a 10-kg box lift and lower 100 times in 15 minutes. Immediately after that, muscle fatigue index (Median Frequency: MF) and blood fatigue index (Creatine Kinase Lactate: CK, Lactate Dehydrogenase: LDH) were measured by using surface electromyography. The subjects were divided into two groups, and microcurrent stimulation and rest were mediated to the experimental and control groups, respectively, for 20 minutes. After intervention, muscle fatigue index and blood fatigue index were measured and the changes in the accumulated fatigue index were compared. Both groups manifested significantly decreased cumulative fatigue after applying the mediation compared to the pre-intervention level (p < .05), the only exception being the fatigue index of the left erector spinae in the rest group. Compared to the rest group, the microcurrent stimulation group showed a significant decrease in muscle fatigue index (p < .05) but no significant differences were found in the blood fatigue index. Given the results of this study, microcurrent stimulation is considered to be helpful in muscle fatigue recovery for workers who have to perform repetitive movements lifting weights, and additional studies on the correlations of the fatigue recovery with respect to the long-term follow-up of fatigue index and mediation time are necessary.