• 한국토양비료학회지
• /
• 제17권2호
• /
• pp.155-160
• /
• 1984

토양(土壤) 물리성(物理性)이 농기계(農機械) 작업능률(作業能率)에 미치는 영향(影響)을 구명(究明)하기 위하여 토성(土性)과 수분조건(水分條件)이 각각 상이(相異)한 논토양(土壤)에서 제반(諸般) 토양물리성(土壤物理性)을 조사(調査)하고 경운기(耕耘機)와 트랙타를 이용(利用)한 작업능률(作業能率)을 조사(調査)한 결과(結果)는 다음과 같다. 1. 토양(土壤)의 경도(硬度), 전단저항(剪斷抵抗), 마찰저항(摩擦低沆), 판(板) 및 차륜침하량(車輪沈下量), 진행저하율(進行低下率) 및 족적심등(足蹟深等)은 토성(土性)과 수분함량(水分含量)에 따라 변화(變化)되었으며 이에 따라 작업능률(作業能率)도 큰 차이(差異)가 있었다. 2. 동력경운기(動力耕耘機)의 작업능률(作業能率)은 전단저항(剪斷抵抗)이 $200{\sim}450g/cm^2$ 범위(範圍)에서 가장 양호(良好)하며 $200g/cm^2$ 이하(以下)에서는 경운기(耕耘機)와 트랙타 작업(作業)이 불량(不良)하였다. 3. 작업능률(作業能率)이 높은 경도범위(硬度範圍)는 트랙타가 $8{\sim}12kg/cm^2$ 이었고 경운기(耕耘機)는 $6{\sim}10kg/cm^2$이었다. 4. 족적심(足跡深)은 기존(旣存) 기기(器機)의 측정치(測定値)와 상관(相關)이 높았고 적정(適正) 족적심(足跡深)은 1~2cm, 작업(作業) 불가능(不可能) 범위(範圍)는 경운기(耕耘機) 2cm이상(以上), 트랙타 5cm이상(以上)이었다.

• Journal of Trauma and Injury
• /
• 제28권2호
• /
• pp.60-66
• /
• 2015

Purpose: Cultivator accidents are frequent and often lead to abdomino-perineal organ injury and, if severe, to death. This study presents the clinical characteristics, outcomes, and factors associated with mortality in patients who sustained an abdomino-perineal organ injury in cultivator accidents. Methods: We retrospectively analyzed the records of 53 patients who visited the emergency department of a tertiary hospital with abdomino-perineal organ injuries caused in cultivator accidents from April 2005 to March 2010. Results: All 53 patients had visited other medical institutions before visiting our hospital. Their mean age was $64.0{\pm}11.1$ (range, 20-80) years and 32 (60.4%) patients were 65 or older. The male-to-female ratio was 46:7. The chief complaint was abdominal pain (38 cases, 71.7%). The 53 patients included 41 cultivator operators (77.4%), 11 passengers (20.8%), and 1 passerby (1.9%). The causes of the injuries included a direct impact of the handlebar in 20 cases (37.7%), a rollover in 21 cases (39.6%), a fall in 10 cases (18.9%), and a wheel in two cases (3.8%). Several of the 53 patients had injuries to multiple abdomino-perineal organs, and the injured organs included the liver (23 cases, 26.4%), spleen (16 cases, 18.4%), pancreas (7 cases, 8.0%), small bowel (7 cases, 8.0%), mesentery (6 cases, 6.9%), adrenal gland (5 cases, 5.8%), and other organs. According to the abbreviated injury scale (AIS) dictionary, a thoracic injury was the most frequent co-injury (33 of 53 cases, 62.3%). Abdomino-perineal surgery was performed in 31 cases (58.8%) and angio-embolization was performed for six liver and two kidney injuries. Thirteen patients died (24.5%); all were males. The Injury Severity Scale (ISS) was lower in the survivors ($17.8{\pm}8.5$ vs. $27.0{\pm}16.0$; p=0.010). Conclusion: With the aging of agricultural workers, safety education programs should be implemented. Furthermore, the patient transfer system in agricultural areas must be improved.

• Journal of Biosystems Engineering
• /
• 제43권4호
• /
• pp.285-295
• /
• 2018

Purpose: The aim of this study is to develop a three-wheel riding cultivator for improving the performance of the current four-wheel riding cultivators in the market. Methods: A prototype three-wheel riding cultivator with the rated power of 15.5-kW, a primary hydrostatic and a two-speed selective gear transmission shifts, front/rear three-wheel drive, a hydraulic wheel tread adjustment, and the mid-section attachment of the major implements was designed and constructed. Its specifications and basic performance are investigated. Results: The maximum speeds of the prototype at the low and high stages were measured to be approximately 7.31, and 11.29 km/h in forward travel, respectively, and approximately 3.60, and 6.37 km/h in rearward travel, respectively. The minimum ground clearance is shown to be 670 mm. The rotating speeds of the power takeoff (PTO) shaft at the low and high stages are shown to be approximately 795 and 1,140 rpm, respectively. The tread of the rear wheels, the minimum radius of turning, and the maximum lifting height of the parallel link device are measured to be within 1,320-1,720 mm, 2.80 m, and 390 mm, respectively. Approximately 25.3% and 74.7% of the total weight of the prototype are distributed in the front and rear wheels on flat ground, respectively. When the tread of rear wheels increased from 1,320 to 1,720 mm, the left and right static lateral overturning angles increased from $33.4^{\circ}$ to $39.1^{\circ}$ and from $29.0^{\circ}$ to $36.1^{\circ}$, respectively. Conclusions: The prototype three-wheel riding cultivator showed a wide range of travel and PTO speeds, high minimum ground clearance, small minimum radius of turning, and easy control of the rear wheel tread. Further, the easy observation of cultivating operations by mid-mounting the implements can improve quality of work. Therefore, the prototype is expected to contribute to the riding mechanization of cultivating operations for various upland crops in Korea.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 학술발표대회 논문집
• /
• pp.187-191
• /
• 1996

• Journal of Biosystems Engineering
• /
• 제29권2호
• /
• pp.101-108
• /
• 2004

The objectives of this study were to determine the natural frequency of a walking-type cultivator's handle using a modal analysis, to determine whether or not the handle resonates with forcing frequency induced by its engine, and to determine a method to reduce the handle vibration using a technique of the operational deflection shapes(ODS). Results of the study are as follows: The natural frequencies of the handle up to third harmonics were found to be 20.4, 22.5 and 92.1 Hz in the vertical direction and 14.9, 93, and 132 Hz in the horizontal direction. It was found that the handle does not resonate with the forcing frequency of the engine, which is 52 Hz. The operational deflection shape analysis revealed the deflected shapes of the handle in the vertical and horizontal directions and suggested that the handle vibration can be reduced by adding some mass to the place where the largest deflection occurs. Attaching of 1.1 kg mass adjacent to the largely deflected area resulted in reductions of vibration from 9.45 to 8.03 m/s$^2$ in x-axis direction from 3.89 to 3.16 m/s$^2$ in y-axis direction and from 7.89 to 3.09 m/s$^2$ in z-axis direction, which are respectively 15, 19 and 61% reductions. The total vibration level was reduced by 29%, indicating that mass-adding method by the ODS is very effective for reducing the handle vibrations of the cultivators.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2001년도 추계학술대회
• /
• pp.193-202
• /
• 2001

The individual rotten water purification tank recently discharges wastewater and sewage through the outlet without purification ability. The outlet water and affiliated water purification tank with microorganism cultivator tank cultivates microorganism and then drops the value BOD, COD of sewage and discharges the quality of water into the outlet. The blower and water pump operating continuously prompts the waste of energy and deterioration of equipment. Each room of deposition tank, foaming tank, microorganism cultivator tank is equipment with the sludge detection senses so it can detect the density of each room. The power-drive plant of the blower and water pump which ate the system cultivating the microorganism must be made as fuzzy controlization (If the sludge amount of each room become higher, the rate of operation of blower and water pump must heighten, on the contrary, in case of row sludge amount, the total handling amount and microorganism handling amount of each room of control. Tank reducing the rate of operation must be DB. At present, the blower amount in proportion to the sludge and oxygen demanding amount has to control. Each mom must be checked outlet level of the outlet, also each room must flow backward discharge materials, and must operate feed-back control until we want to be come as a below value of BOD/COD(10PPM ; KS).

• 대한안전경영과학회지
• /
• 제3권4호
• /
• pp.53-63
• /
• 2001

The individual rotten water purification tank recently discharges wastewater and sewage through the outlet without purification ability. The outlet water and affiliated water purification tank with microorganism cultivator tank cultivates microorganism and then drops the value BOD, COD of sewage and discharges the quality of water into the outlet. The blower and water pump operating continuously prompts the waste of energy and deterioration of equipment. Each room of deposition tank, foaming tank, microorganism cultivator tank is equipment with the sludge detection senses so it can detect the density of each room. The power-drive plant of the blower and water pump which are the system cultivating the microorganism must be made as fuzzy controlization (If the sludge amount of each room become higher, the rate of operation of blower and water pump must heighten, on the contrary, in case of row sludge amount, the total handling amount and microorganism handling amount of each room of control. Tank reducing the rate of operation must be DB. At present, the blower amount in proportion to the sludge and oxyzen demanding amount has to control. Each room mus be checked outlet level of the outlet, also each room must flow backward discharge materials, and must operate feed-back control until we want to be come as a below value of BOD/COD(10PPM ; KS).

• 한국응급구조학회지
• /
• 제25권2호
• /
• pp.99-112
• /
• 2021

Purpose: The study aimed to analyze the current status of traffic accident victims who were transported by 119 ambulances within the administrative district of Chungnam province and provide essential data for accident prevention. Methods: The pre-hospital care records of patients who called the 119 emergency service in 2019 were obtained from the Chungnam Fire Department. Data pertaining to 13,663 traffic accident victims who were transported to hospitals were analyzed. Results: Patients in those aged ≥60 years accounted for 49.8% of the total cases. In patients aged ≥80 years(n=2,154), motor cycle accidents were highest as 28.3%. In addition, cultivator (n=135) and buggy car (n=79) accident victims were the highest in aged ≥80 years as 66.7% and 67.1%, respectively. Traffic accident victims-population ratio in Chungnam was 0.65%, wherein 2.03% included population aged ≥80 years. Conclusion: It was clear that accidents varied across administrative districts depending on the age group of population distribution. Thus, safety measures for preventing motorcycle, cultivator, and buggy car accidents are necessary for areas with many older people aged ≥80 years.

• 한국토양비료학회지
• /
• 제18권2호
• /
• pp.189-193
• /
• 1985

경운방법(耕耘方法)의 차이(差異)가 토양(土壤)의 물리적특성(物理的特性)과 수도생육(水稻生育)에 미치는 영향(影響)을 구명(究明)하기 위(爲)하여 미사식양질답(微砂埴壤質畓)에서 경운기경운(耕耘機耕耘), 무경운(無耕耘), 로타리, 심경(深耕), 심토파쇄(深土破碎) 및 치슬프라우 등(等) 6개(個)의 상이(相異)한 경운조건하(耕耘條件下)에서 수도(水稻)를 재배(栽培)하였다. 1. 작업능률(作業能率)은 치슬프라우가 600a/hr로 가장 높았으며 트랙터심경(深耕)>심토파쇄(深土破碎)>로타리>경운기경운(耕耘機耕耘)의 순서(順序)로 낮아졌다. 2. 물리성개선(物理性改善) 효과(效果)는 토심(土深) 20cm까지는 트랙터 심경(深耕)과 치슬프라우가 양호(良好)하였으며, 20cm이하(以下) 깊이에서는 심토파쇄(深土破碎)가 효과적(效果的)이었다. 3. 수도수량(水稻收量)은 경운기경운(耕耘機耕耘)에 비(比)하여 로타리구(區) 4% 무경운구(無耕耘區)는 11% 감수(減收)되었고, 심경구(深耕區)는 5%, 심토파쇄(深土破碎) 4%, 치슬프라우는 3% 증수(增收)되었으며 작업능률(作業能率)과 수량면(收量面)에서 종합(綜合) 고찰(考察)해보면 심경구(深耕區)가 합리적(合理的)인 경운방법(耕耘方法)으로 판단(判斷)된다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2003년도 하계 학술대회 논문집
• /
• pp.169-174
• /
• 2003

농업기계의 이용도 제고를 위해서는 원활한 부품공급에 의한 신속한 수리가 이루어 져야 한다. 특히 작업시기가 한정되어 있는 농업기계의 경우 고장발생시 신속한 수리가 이루어지지 않는다면 적기작업에 차질은 빚음은 물론 수리비부담과 시간까지 허비하게 되어 농업기계 이용비용을 가중시키게 된다. (중략)