• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.469-472
• /
• 1999

CeO$_2$ thin films have used in wide applications such as SOI, buffer layer, antirflection coating, and gate dielectric layer. CeO$_2$takes one of the cubic system of fluorite structure and shows similar lattice constant (a=0.541nm) to silicon (a=0.543nm). We investigated CeO$_2$films as buffer layer material for nonvolatile memory device application of a single transistor. Aiming at the single transistor FRAM device with a gate region configuration of PZT/CeO$_2$ /P-Si , this paper focused on CeO$_2$-Si interface properties. CeO$_2$ films were grown on P-type Si(100) substrates by 13.56MHz RF magnetron sputtering system using a 2 inch Ce metal target. To characterize the CeO$_2$ films, we employed an XRD, AFM, C-V, and I-V for structural, surface morphological, and electrical property investigations, respectively. This paper demonstrates the best lattice mismatch as low as 0.2 % and average surface roughness down to 6.8 $\AA$. MIS structure of CeO$_2$ shows that breakdown electric field of 1.2 MV/cm, dielectric constant around 13.6 at growth temperature of 200 $^{\circ}C$, and interface state densities as low as 1.84$\times$10$^{11}$ cm $^{-1}$ eV$^{-1}$ . We probes the material properties of CeO$_2$ films for a buffer layer of FRAM applications.

• 동굴
• /
• 제45권46호
• /
• pp.9-31
• /
• 1996

The Mt. Peakdu is situated in north of the main peninsula, commanding geographically coordinated between longitude W($127^{\circ}$ 15' - $128^{\circ}$ 00') to E($128^{\circ}$ 15'- $129^{\circ}$ 00'), between latitude from S($41^{\circ}$ 15'- $42^{\circ}$ 00') to N($42^{\circ}$ 10'- $42^{\circ}$ 40'). The Manjyang-Gul in Cheju volcanic island is situated in the south of the main peninsula, commanding the Korean Strait, geographically coordinated longitude N($33^{\circ}$ 32' 26") and E($126^{\circ}$ 46' 48"). The quantitative analysis using XRF of volcanic rock samples for the north of Lu- Ming- Feng in Mt. Peakdu Group and the Manjang-Gul in Cheju island was Performed. The major chemical components by group analysis are as follows; Peakdu-Mt. Cheju Peakdu-Mt. Cheju (1) $Na_2O$(3.29Wt% and 3.27Wt%) (2) MgO (3.95Wt% and 6.l5Wt%) (3) $Al_2O_3$((17.64Wt% and 15.l7Wt%) (4) $SiO_2$((50.62Wt% and 50.99Wt%) (5) $P_2O_5$ (0.36Wt% and 0.30Wt%) (6) $K_2O$ (1.37Wt% and 1.04Wt%) (7) CaO (8.56Wt% and 8.06Wt%) (8) $TiO_2$ (2.37Wt% and 2.l5Wt%) (9) MnO (0.llWt% and 0.l6Wt%) (10) $Fe_2O_3$(9.l2Wt% and 12.56Wt%) The Group analysis data were compared in the relation within the age of formation for $0.16{\pm}0.08Ma$ in Mt. Peakdu Group, and $0.42{\pm}42Ma$ or $0.42{\pm}42Ma$ in Cheju island for K-Ar age. The crystal structure are mixed crystal of monoclinic, hexagonal and triclinic system in Mt. Peakdu Group and mixed structure of triclinic and cubic system in Cheju volcanic island.ic island.

• 한국전기전자재료학회논문지
• /
• 제28권10호
• /
• pp.642-647
• /
• 2015

The perovskite solid solutions of the $Sr_{1-x}Mg_xFe{^{3+}}_{1-{\tau}}Fe{^{4+}}_{\tau}O_{3-y}$ system (x=0.0, 0.1, 0.2, and 0.3) were synthesized in $N_2$ at $1,150^{\circ}C$. X-ray powder diffraction study assured that all the four samples had cubic symmetries(SM-0: $3.865{\AA}$, SM-1: $3.849{\AA}$, SM-2: $3.833{\AA}$, and SM-3: $3.820{\AA}$) and that the lattice volumes decreased steadily from $57.7{\AA}^3$ to $55.7{\AA}^3$ with x values. The nonstoichiometric chemical formulas were determined by Mohr salt analysis and with the increase of x values the amounts of $Fe^{4+}$ ion and oxygen were decreased simultaneously. Thermal analysis showed that SM-0 started to lose its oxygen at $450^{\circ}C$ and SM-1, Sm-2, and SM-3 began to lose their oxygen at around $350{\sim}400^{\circ}C$. SM-0 showed almost reversible weight change in the cooling process. All the samples exhibited semiconducting behaviors in the temperature range of $10{\sim}400^{\circ}C$. Conductivities of the 4 samples were decreased in the order of SM-0, SM-1, SM-2, and SM-3 at constant temperature. The activation energies of the conductions were in the range of 0.176 eV~0.244 eV.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.325-325
• /
• 2007

The perovskites in the $LaAlO_3-BaZrO_3$ system (i.e., $(1-x)LaAlO_3-xBaZrO_3$ were fabricated by a solid state reaction and their dielectric properties were investigated. For the compositions of x=0.1~0.9, the mixture of $LaAlO_3$ with a rhombohedral structure and $BaZrO_3$ with a cubic was observed when the sintering was conducted at $1500^{\circ}C$, indicating that the solubility of constituent elements was very low and a narrow solid solution region might exist. The large difference of ionic radii between $La^{3+}$ ion (0.136nm, C.N.=12) and $Ba^{2+}$ ion (0.161nm) or $Al^{3+}$ ion (0.0535nm, C.N.=6) and $Zr^{4+}$ ion (0.072nm) might hinder the mutual substitution. Within the compositions of x=0~0.7, the dielectric constant of the mixture increased with the amount of $BaZrO_3$, i.e., x value, which was in good agreement with the logarithmic mixing rule (In $_{r,i}={\Sigma}v_iln\;_{r,i}$). The increase in $BaZrO_3$ doping decreased $Q{\times}f$ value significantly due to the low $Q{\times}f$ value of $BaZrO_3$ itself, a poor microstructure of the mixture with an increased grain boundary area per volume, and defects in the cation and oxygen sub-lattices which were respectively caused by the evaporation of barium during the sintering process and the substitution of Ba on La-site or Al on Zr-site.

• Current Photovoltaic Research
• /
• 제10권4호
• /
• pp.101-106
• /
• 2022

We prepared a CsPbI₂Br solution using Cesium iodide (CsI), Lead (II) bromide (PbBr₂) and Lead (II) iodide (PbI₂) materials into a polar solvent mixture of N,N-dimethylformamide (DMF) and Dimethyl sulfoxide (DMSO). A simple spin coating technique was used for the fabrication of CsPbI₂Br absorber layer in the solution process. In order to prepare uniform coating of absorber film we adopted a hot-air process in assocation with the spin coating. It was confirmed that the thin film manufactured by the hot-air process had a higher absorption rate than that without it, and the optical band gap was measured 1.93 eV. The thin film of absorber was uniformly prepared and revealed the Black α-Cubic crystal phase as proved through X-ray diffraction analysis. Finally, a perovskite solar cell having an n-i-p structure was manufactured with a CsPbI₂Br perovskite absorption layer. From the solar cell, we obtained a power conversion efficiency (PCE) of 5.97% in a forward measurement.

• Journal of Electrochemical Science and Technology
• /
• 제14권1호
• /
• pp.75-84
• /
• 2023

The accumulation of spent carbide (YG8), not only pollutes the environment but also causes waste of tungsten, cobalt and other rare metal resources. To better address this issue, we proposed a combined electrochemical separation process of low-temperature aqueous solution and high-temperature molten salt for tungsten and cobalt. H₂WO₄ was obtained from spent carbide in an aqueous solution, and we calcined it to obtain WO₃, which was used as a raw material to obtain tungsten by using molten salt electrodeposition. The influence of the current efficiency and the electrochemical behavior of the discharge precipitation of W(VI) were also studied. The calcination results showed that the morphology of WO₃ was regular and there were no other impurities. The maximum current efficiency of 82.91% was achieved in a series of electrodeposition experiments. According to XRD and SEM analysis, the recovered product was high purity tungsten, which belongs to the simple cubic crystal system. In the W(VI) reduction mechanism experiments, the electrochemical process of W(VI) in NaCl-Na₂WO₄-WO₃ molten salt was investigated using linear scanning voltammetry (LSV) and chronoamperometry in a three-electrode system. The LSV showed that W(VI) was reduced at the cathode in two steps and the electrode reaction was controlled by diffusion. The fitting results of chronoamperometry showed that the nucleation mechanism of W(VI) was an instantaneous nucleation mode, and the diffusion coefficient was 7.379×10^-10 cm²·s^-1.

• 한국결정성장학회지
• /
• 제3권2호
• /
• pp.107-116
• /
• 1993

LPCVD 조건하에서 Si 기판을 이용하여 W$F_6$를 환원시키거나 Si$H_4$를 이용하여 W$F_6$를 환원시켜 Si(100) 기판위에 텅스텐 박막을 증착하였다. 증착된 박막들의 표면 및 단면 형상과 특성들을 조사하였으며 박막들의 결정구조는 체심입방구조를 이루는${alpha}$-W임을 알수 있었다. 박막내의 텅스텐의 양과 grain들의 크기는 박막이 성장함에 따라 증가하였다. 실험적인 결과와 이론적인 고찰들로부터 텅스텐 박막은 Volmer-Weber 성장양식인 island growth를 이룸을 알 수 있었고 세부적인 박막 성장양식을 제시하였다. 또한 텅스텐 박막이 성장할수록 박막의 결정구조는 점점 단결정화 하여감을 알수 있었다.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제24권1호
• /
• pp.67-73
• /
• 2024

Background: Nitrous oxide has been an integral part of surgical anesthesia for many years in the developed world and is still used in developing countries such as India. The other main concerns in low-resource countries are the lack of an advanced anesthesia gas-scavenging system and modular surgical theatres. As a greenhouse gas that has been present in the atmosphere for more than 100 years and damages the ozone layer, nitrous oxide is three times worse than sevoflurane. Here, we conducted an observational study to quantify the annual nitrous oxide consumption and its environmental impact in terms of carbon dioxide equivalence in one of busiest tertiary health care and research centers in Northern India. Methods: Data related to nitrous oxide expenditure' from the operation theatre and manifold complex of our tertiary care hospital and research center from 2018 to 2021 were collected monthly and analyzed. The outcomes were extracted from our observational study, which was approved by our institutional ethics board (INT/IEC/2017/1372 Dated 25.11.2017) and registered prospectively under the Central Registry (CTRI/2018/07/014745 Dated 05.07.2018). Results: The annual nitrous oxide consumption in our tertiary care hospital was 22,081.00, 22,904.00, 17,456.00, and 18,392.00 m³ (cubic meters) in 2018, 2019, 2020, and 2021, respectively. This indicates that the environmental impact of nitrous oxide (in terms of CO₂ equivalents) from our hospital in 2018, 2019, 2020, and 2021 was 13,016.64, 13,287.82, 10,289.94, and 10,841.24 tons, respectively. Conclusion: This huge amount of nitrous oxide splurge is no longer a matter of laughter, and serious efforts should be made at every central and peripheral health center level to reduce it.

• 대한화학회지
• /
• 제38권11호
• /
• pp.785-791
• /
• 1994

$Sr_1-_xY_xMnO_3$ (x = 0.0∼1.0)을 citrate법으로 합성하고 조성에 따른 구조적 전기적 성질의 변화를 알아보았다. X-ray diffraction method에 의해 각 산화물의 구조를 결정한 결과, $Sr_1-_xY_xMnO_3$ (x = 0.0∼1.0) system은 조성에 따라 4L-hexagonal perovskite(x = 0.0∼0.3) 구조, rhombohedral perovskite(x = 0.3∼0.7)구조를 거쳐 hexagonal nonperovskite(x=0.7∼1.0) 구조까지 3가지의 다른 결정구조를 갖는 것으로 관찰되었다. 이러한 $Sr_1-_xY_xMnO_3$ system의 구조 변화는 yttrium 양이 증가함에 따라 cell parameter가 증가하는 경향을 보였으며, 이는 $Mn^{4+}$ 대신 $Mn^{3+}$가 증가함에 따른 것으로 믿어진다. $SrMnO_3$의 $Sr^{2+}$ 자리에 $Y^{3+}$를 치환할수록 conductivity가 크게 증가하는 것이 관찰되었다. 4L-hexagonal구조를 갖는 $Sr_{0.9}Y_{0.1}MnO_3$와 pseudocubic perovskite 구조를 갖는 $Sr_{0.5}Y_{0.5}MnO_3$의 온도에 따른 전기저항 측정결과, $Sr_{0.9}Y_{0.1}MnO_3$에서 더 큰 energy gap을 갖는 것으로 관찰되었으며, 이 결과는 4L-hexagonal구조가 metal-metal 결합에 의해 안정화되어 있기 때문인 것으로 설명된다.

• 한국수자원학회논문집
• /
• 제55권8호
• /
• pp.589-601
• /
• 2022

가뭄은 자연적 현상이지만, 지역의 물리적 및 사회적 요소와 결합되어 피해가 발생한다. 특히, 각종 용수 공급 및 수요과 연관되어 사회 경제적으로 큰 피해를 야기시킨다. 비슷한 심도의 기상학적 가뭄에도 지역의 특성과 용수공급체계에 따라 실제로 발생하는 가뭄 피해는 다르다. 본 연구에서는 지역의 사회·경제적 인자와 용수공급체계를 고려하여 가뭄 위험도를 평가하였다. 노출성은 용수공급 과부족량을 나타내는 결합가뭄관리지수(JDMI)를 등급화하여 평가하였다. 취약성은 가뭄에 영향을 받는 10개의 사회·경제적 인자에 엔트로피, PCA 및 GMM를 적용하여 가중평균하여 평가하였다. 대응능력은 지역의 용수능력을 나타내는 인자들을 베이지안 네트워크에 적용하여 평가하였다. 위험도는 노출성, 취약성 및 대응능력을 통합하여 결정하였다. 용수공급 실패 사상의 발생 가능성을 의미하는 가뭄 노출성을 평가한 결과, 괴산군이 0.81로 가장 높게 나타났다. 가뭄 취약성의 경우, 대전광역시가 0.61로 매우 취약한 것으로 나타났다. 지역의 용수공급체계가 고려된 가뭄 대응능력을 평가한 결과, 세종시가 가뭄 대응능력이 가장 낮은 것으로 나타났다. 마지막으로 위험도를 평가한 결과, 청주시가 가장 높게 나타났다. 이러한 결과를 통해 가뭄에 대한 위험 및 취약 원인을 파악하였으며, 향후 지역의 특성을 고려한 가뭄 피해 저감 정책 마련이 가능하다.