• Journal of Powder Materials
• /
• v.18 no.3
• /
• pp.262-268
• /
• 2011

In order to investigate the microstructure and mechanical properties of WC-10 wt% Co insert tool alloy fabricated by PIM (Powder Injection Molding) process, the feedstock of WC-10 wt% and wax used as a kind of binder were mixed together by two blade mixer. After injection molding, the debinding process was carried out by two-steps. First, solvent extraction, in which the binder was eliminated by putting the specimen into normal hexane for 24 hrs at $60^{\circ}C$, and subsequently thermal debinding which was conducted at $260^{\circ}C$ and $480^{\circ}C$ for 6 hrs in the mixed gas of $H_2/N_2$, respectively. Meantime, in order to compensate the decarburization due to hydrogen, 1.2~1.8% of carbon was added to ensure the integrity of the phase. Finally, the specimens were sintered in vacuum under different temperatures, and the relative density of 99.8% and hardness of 2100 Hv can be achieved when sintered at $1380^{\circ}C$, even the TRS is lower than the conventional sintering process.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.3
• /
• pp.274-280
• /
• 2016

Hinge driving type holding and release mechanism based on the burn wire release for application of cubesat is main payload of STEP Cube Lab. (Cube Laboratory for Space Technology Experimental Project) to be launched at 2015. It has high constraint force, low shock level as well as surmounting drawbacks of conventional nichrome burn wire release method that has relatively low constraint force and system complexity for application of multi-deployable systems. In this paper, we have proposed a flight model of holding and release mechanism for the verification of the constraint force and deployment status signal acquisition. To validate the effectiveness of the flight model, launch and on-orbit environment verification test have been performed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.4
• /
• pp.363-372
• /
• 2016

SIGMA(Scientific cubesat with Instruments for Global Magnetic field and rAdiation) CubeSat has been developed for magnetic field measurement of the Earth and space radiation measurement at Kyung Hee university. The flight software plays important roles in controlling the satellite and processing the data in the space mission. In this paper, the Flight Software has been implemented to process all the tasks in the one thread without RTOS(Real Time Operating System). This is an effective mothed not only to concentrate the space mission of CubeSat but also to reduce the overhead of the Flight Software by considering the mission perform procedures and the system control methods.

• Journal of Hydrogen and New Energy
• /
• v.22 no.1
• /
• pp.42-50
• /
• 2011

The Montmorillonite (MMT) in the polymer matrix is expected to reduce methanol permeability due to the tortous path formed by dispersed silicate layers. However, the polymer composite membranes containing non-proton conducting inorganic particle tend to show low proton conductivity. To solve this problem, we used an ion exchange method to prepare functionalized MMT with various silane coupling agents. The modified MMT was randomly dispersed in sulfonated poly (arylene ether sulfone) (SPAES) matrix to prepare SPAES/modified MMT composite membranes. The performances of hybrid membranes for DMFCs application were investigated. The SPAES/modified composite membrane showed increased proton conductivity compared with the non-modified MMT composite membrane. However, the methanol permeability of the SPAES/modified membrane was higher than that of the non-modified MMT.

• Journal of Powder Materials
• /
• v.17 no.3
• /
• pp.216-222
• /
• 2010

Self-standing $TiO_2$ nanotube arrays were fabricated by potentiostatic anodic oxidation method using pure Ti foil as a working electrode and ethylene glycol solution as electrolytes with small addition of $NH_4F$ and $H_2O$. The influences of anodization temperature and time on the morphology and formation of $TiO_2$ nanotube arrays were investigated. The fabricated $TiO_2$ nanotube arrays were applied as a photoelectrode to dye-sensitized solar cells. Regardless of anodizing temperature and time, the average diameter and wall thickness of $TiO_2$ nanotube show a similar value, whereas the thickness show a different trend with reaction temperature. The thickness of $TiO_2$ nanotube arrays anodized at $20^{\circ}C$ and $30^{\circ}C$ was time-dependent, but on the other hand its at $10^{\circ}C$ are independent of anodization time. The conversion efficiency is low, which is due to a morphology breaking of the $TiO_2$ nanotube arrays in manufacturing process of photoelectrode.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.54.1-54.1
• /
• 2014

Kyung Hee University has been developing a CubeSat for the space science mission called SIGMA (Scientific cubesat with Instrument for Global Magnetic field and rAdiation), which includes TEPC (Tissue Equivalent Proportional Counter) and a magnetometer. SIGMA has a 3-unit CubeSat, and the weight is about 3.2 kg. The main payload is TEPC which can measure the Linear Energy Transfer (LET) spectrum and calculate the equivalent dose for the complicated radiation field in the space. The magnetometer is a secondary payload using a miniaturized fluxgate magnetometer. We expect it to have a 1 nT resolution in the dynamic range of ${\pm}65535$ nT. An Attitude Control System (ACS) spins the SIGMA spacecraft 4 rpm with the spin axis perpendicular to the ecliptic plane. Full duplex communication is consists of VHF uplink and S-band and UHF downlink. In this paper, we introduce the system design and the scientific purpose of the SIGMA CubeSat mission.

• Journal of Korea Foundry Society
• /
• v.26 no.6
• /
• pp.272-276
• /
• 2006

For the first time AZ91 (MgAl9Zn1) and AM60 (MgAl6) Mg alloy foams with homogeneous pore structures were prepared successfully via melting foaming method by using $CaCO_3$ powder as blowing agent. The possible foaming mechanisms and pore structures of these Mg alloy foams were discussed and investigated. The results show that Mg alloy melt can affect $CaCO_3$ decomposition behavior and AZ91 Mg alloy is relative easy to be foamed into metal foam with high porosity and big pore size.

• Polymer(Korea)
• /
• v.31 no.2
• /
• pp.136-140
• /
• 2007

Charge transfer interaction as a hybridization mechanism of silsesquioxane/polymer was tested using carbazole (electron donor) group and dinitrobenzene (electron acceptor) group. Hybridization test was conducted using films made from mixing/casting of poly (carbazole-styrene) (PS/D) and dimtrobenzyl silsesquioxane (Cube/A), and transparent hybrid films were successfully obtained under some conditions. $^1H-NMR$ of PS/D and Cube/A, and W absorption test of hybrid films showed that one acceptor and one donor can form one charge transfer complex when no silsesquioxane molecule was included in films, but transparent hybrids with no phase separation were obtained only at acceptor/donor ratios less than 0.7 : 1. These results also suggested that on average 4 charge transfer complexes form per one silsesquioxane.

• The Journal of the Korea Contents Association
• /
• v.17 no.5
• /
• pp.565-573
• /
• 2017

The ex-post evaluation of governmental crisis management is an important issues since it is necessary to prepare for the future disasters and becomes the cornerstone of our success as well. In this paper, we propose a data cube model with data mining techniques for the analysis of governmental crisis management strategies and ripple effects of foot-and-mouth(FMD) disease using the online news articles. Based on the construction of the data cube model, a multidimensional FMD analysis is performed using on line analytical processing operations (OLAP) to assess the temporal perspectives of the spread of the disease with varying levels of abstraction. Furthermore, the proposed analysis model provides useful information that generates the causal relationship between crisis response actions and its social ripple effects of FMD outbreaks by applying association rule mining. We confirmed the feasibility and applicability of the proposed FMD analysis model by implementing and applying an analysis system to FMD outbreaks from July 2010 to December 2011 in South Korea.

• The KIPS Transactions:PartD
• /
• v.15D no.2
• /
• pp.171-178
• /
• 2008

Since the XML standard was introduced by the W3C in 1998, documents that have been written in XML have been gradually increasing. Accordingly, several systems have been developed in order to efficiently manage and retrieve massive XML documents. BitCube-a bitmap indexing system-is a representative system for this field of research. Based on the bitmap indexing technique, the path bitmap indexing system(LH06), which performs the clustering of similar paths, improved the problem that the existing BitCube system could not solve, namely, determining similar paths. The path bitmap indexing system has the advantage of a higher retrieval speed in not only exactly matched path searching but also similar path searching. However, the similarity calculation algorithm of this system has a few particular problems. Consequently, it sometimes cannot calculate the similarity even though some of two paths have extremely similar relationships; further, it results in an increment in the number of meaningless clusters. In this paper, we have proposed a novel method that clustering, the similarity between the paths in order to solve these problems. The proposed system yields a stable result for clustering, and it obtains a high score in clustering precision during a performance evaluation against LH06.