• 한국전기전자재료학회논문지
• /
• 제17권7호
• /
• pp.718-723
• /
• 2004

Crystal structure of $(Ba-{1-x}La_x)[Mg_\frac{1+x}{3}}Nb_\frac{{2-x}{3}}]O_3$ (BLMN) ceramics with 0\leq1x \geq was investigated using synchrotron X-ray powder diffraction (XRD) and high reso(B $a_{l-x}$L $a_{x}$)[M $g_{(1+x)}$3/N $b_{(2-x)/3}$］ $O_3$lution transmission electron microscopy (HRTEM). When the La content, x, is above 0.1, the 1:2 ordered hexagonal structure found in Ba($Mg_\frac{1}{3}Nb_\frac{2}{3}})O_3$(BMN) was transformed into 1:1 ordered cubic structure. The 1:1 ordered cubic structure was maintained up to x=0.7. When x exceeded 0.7, however, BLMN was transformed into 1:1 ordered structure which has cation displacement and in-phase and anti-phase tilt of octahedra.

• Current Optics and Photonics
• /
• 제3권1호
• /
• pp.33-39
• /
• 2019

We report development of a frequency-stabilized mid-infrared continuous-wave (cw) optical parametric oscillator (OPO) based on a fan-out grating MgO:PPLN crystal pumped at 1064 nm. The OPO resonator was designed as a pump-enhanced standing-wave cavity that resonates to the pump and signal beams. To realize stable operation of the OPO, we applied a modified Pound-Drever-Hall technique, which is a well-known method for powerful laser frequency stabilization. Tuning a poling period of the fan-out grating of the crystal allows wavelength-tunable OPO outputs from 1510 nm to 1852 nm and from 2500 nm to 3600 nm for signal and idler beams, respectively. At the idler wavelengths of 2500 nm, 3000 nm and 3500 nm, we achieved more than 50 mW of output powers at a pumping power of 1.1 W. The long-term stability of the OPO was confirmed by recording the power and wavelength variations of the idler for an hour.

• 한국광학회지
• /
• 제5권4호
• /
• pp.466-472
• /
• 1994

아르곤 레이저에 의해 광펌핑 되는 티타늄 사파이어 레이저를 제작하고 이를 자체 모드록킹 시켰다. 모드록킹은 볼 슬라이더 위에 장착된 공진기 거울의 이동에 의해 시작되었으며 티타늄 사파이어 결정내의 자체 집속 효과와 공진기내에 설치된 조리개에 의해 모드록킹이 유지 되었다. 공진기내의 군속도를 보상하기 위하여 프리즘쌍을 사용하였으며, 모드록킹된 펄스의 대역폭은 11nm, 펄스폭은 $1000\pm20fs$였다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2001년도 제12회 정기총회 및 01년도 동계학술발표회
• /
• pp.24-25
• /
• 2001

광 밴드 갭(photonic band gap)을 가지는 광 결정(photonic crystal)을 이용하여 만들어진 미세 공진기(micro-resonator)를 통해 상온 연속 동작하는 레이저가 최근 개발되었다. 이 미세 공진기는 이득매질(gain medium)이 성장된 반도체의 기판방향과 기판에 수직한 방향을 각각 이차원 광 결정과 판 도파로(slab waveguide) 구조의 전반사를 이용하여 제한하는 구조이다 이러한 광 밴드 갭 공진기의 공진 모드는 그 동안 계산적인 방법을 통해 이론적으로 연구되어 왔으며, 직접 모드의 특성을 측정하는 실험의 필요성이 크게 대두되고 있다. 본 연구에서는 광 밴드 갭에 의해 형성된 2차원 미세 공진기내에서 레이저 발진된 모드의 특성을 먼장 영역(far-field regime)에서 측정 분석한 결과를 보고한다. (중략)

• Current Optics and Photonics
• /
• 제3권3호
• /
• pp.243-247
• /
• 2019

We have developed a compact, wavelength-selectable, Q-switched Nd:YAG laser at mid ultraviolet for chemical warfare agent detection. The fundamental wave at 1064 nm is delivered by a pulsed solid state laser incorporating with a square-type Nd:YAG rod in a resonator closed by two crossed Porro prisms for environmental reliability. The output energy at 213 nm ($5{\omega}$) and 266 nm ($4{\omega}$) by ${\chi}^{(2)}$ process in the sequentially disposed BBO crystals are measured to be 6.8 mJ and 15.1 mJ, respectively. The output wavelength is selected for $5{\omega}$ and $4{\omega}$ by a motorized wavelength switch. The energy ratio of the $5{\omega}$ to the $4{\omega}$ is varied from 0.05 to 0.85 by controlling the phase matching temperature of the nonlinear crystal for sum-frequency generation without change of the output pulse parameters.

• 한국전기전자재료학회논문지
• /
• 제13권6호
• /
• pp.478-484
• /
• 2000

The structural changes and the microwave dielectric properties of $Ba_{1-x}$/A$_{x}$/(Mg$_{1}$3//Nb$_{2}$3/)O$_3$(A=Sr, Ca=x0, 0.2, 0.4, 0.6, 0.8, 1.0) were investigated. The densities of samples are gradually decreased with increasing x(BMN=6.1, SMN=5.22 and CMN=4.26 g/m$^3$)The crystal structure of BMN was untilting of oxygen octahedral. The structural changes of BSMN showed the antiphase tilting at x>0.4, and those of BCMN showed the antiphase tilting at 0.20.8. The variation of dielectric constant with Sr was small(BMN=32, SMN=30) However the variation with Ca was large the highest value was 42 at Ca=0.2(CMN=25) The maximum quality factor was 68,000 GHz at Sr=0.2 and the minimum quality factor was 3,000 GHz at Ca=0.2 (BMN=35,000, SMN=20,000 and CMN=23,000 GHz) The temperature coefficients of resonant frequency of BSMN were about 2 times larger than those of BCMN in all composition.ion.

• 한국전기전자재료학회논문지
• /
• 제19권1호
• /
• pp.35-39
• /
• 2006

In this study, in order to develop the multilayer piezoelectric actuator and ultrasonic resonator, PMN-PNN-PZT ceramics were fabricated by sintering with $Li_2CO_3-Na_2CO_3$ as sintering aids at $950^{\circ}C$ and their piezoelectric and dielectric characteristics were investigated as a function of PNN substitution. With increasing PNN substitution, dielectric constant(${\epsilon}_r$), electromechanical coupling factor(kp), and piezoelectric d constant($d_{33}$) were increased to $12 mol\%$ PNN substitution and then showed a tendency to decrease rapidly With increasing PNN substitution, crystal structure changed from tetragonal to rhombohedral at $12 mol\%$ PNN substitution and then secondary phase was appeared and its intensity was increased. At the $12 mol\%$ PNN substituted PMN-PZT composition ceramic sintered at $950^{\circ}C$, density, kp, $d_{33}$ and Qm showed the optimum value of $7.79 g/cm^3$, 0.599, 419 pC/N, and 894, respectively for multilayer piezoelectric actuator application.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
• /
• pp.201-206
• /
• 2000

Effects of the post-annealing temperature of CeO$_2$ buffer layers on the properties of YBCO films on CeO$_2$-buffered sapphire were investigated. 45 nm-thick CeO$_2$ buffer layer was prepared in-situ on r-cut sapphire using an on-axis rf magnetron sputtering method, which was later post-annealed at temperatures between 950$^{\circ}$C and 1100$^{\circ}$C in an oxygen-flowing environment. YBCO films were prepared on CeO$_2$-buffered sapphire (CbS), for which the surface morphology, crystal structures and electrical properties of the YBCO films were studied. YBCO films on post-annealed CbS appeared to have better properties than those on as-grown CbS with regard to the morphological, structural and electrical properties when the YBCO films were prepared on CeO$_2$ buffer layer post-annealed at temperatures of 1000 - 1050$^{\circ}$C. A TE$_{011}$ mode rutileloaded cylindrical cavity resonators was fabricated with the YBCO films placed as the endplates, for which the unloaded Q of the resonator was measured. It turned out that the resonator with the endplates prepared from the YBCO films on postannealed CbS at 1000 $^{\circ}$C showed the highest unloaded Q with the value more than 8 ${\times}$ 10$^5$ at 30 K and 8.6 CHz, revealing that the YBCO films on post-annealed CbS at 1000$^{\circ}$C the temperature could be the lowest among the YBCO films on post-annealed CbS.

• Current Optics and Photonics
• /
• 제2권5호
• /
• pp.448-452
• /
• 2018

A three-wavelength $Pr^{3+}:YLF$ laser at 604 nm, 607 nm and 640 nm simultaneously output by Fabry-Perot (F-P) etalon has been obtained. A 444 nm blue laser diode is used for pumping the $Pr^{3+}:YLF$ crystal, and a 0.1 mm F-P etalon is inserted in the resonator to select wavelength. The theoretical model of three-wavelength $Pr^{3+}:YLF$ laser is established, by adjusting the tilt angle of the etalon, the transmittances of the different wavelengths can be controlled, and the threshold values can be made to equalize by controlling the loss among different wavelengths. In the experiment, when the tilt angle of etalon is $9^{\circ}$ and the optimized length of resonator is 48 mm, the total output power of 25 mW at the three-wavelength is achieved at incident pump power of 7.5 W.

• 한국정보통신학회논문지
• /
• 제7권2호
• /
• pp.255-262
• /
• 2003

본 논문에서는 FBAR(film bulk acoustic wave resonator) 필터 응용을 위해 Al 하부전극 상에서 RF magnetron sputtering 기술을 이용한 ZnO 박막 증착 및 공정온도가 ZnO 결정성장에 미치는 영향에 대한 연구결과를 발표한다 ZnO 박막의 압전특성은 FBAR 소자의 공진특성을 결정하는 가장 중요한 요소이고 압전성은 증착된 ZnO박막의 c축 우선배향성의 정도에 의해 결정된다는 사실을 고려한다면 ZnO 결정성장에 미치는 공정온도에 관한 연구는 매우 의미 있는 일이다. 본 실험을 통하여 ZnO 박막의 성장특성은 상온에서부터 35$0^{\circ}C$까지의 실험조건에서 c축 우선배향성의 정도에 따라 RF power에 관계없이 온도를 2개의 임계온도에 의해 나눠진 3개의 온도구간으로 구분할 수 있었다. 결과적으로 20$0^{\circ}C$ 이하의 공정온도에서는 주상형 결정립을 가진 c축 우선배향의 ZnO 박막을 얻을 수 있었다. 이렇게 얻은 ZnO박막을 사용하여 FBAR 다층박막 구조를 구현하였다.