• 대한조선학회지
• /
• 제27권1호
• /
• pp.17-23
• /
• 1990

세장비가 작은 구조부재는 충돌과 같은 상황하에서 압축을 받는 경우, 축방향으로 접혀지는 소성 변형에 의해서 충돌에너지의 대부분을 흡수한다. 이 경우, 관성을 무시한다 하더라도 연강 부재의 정적인 하중에 대한 압괴강도에 비해서 변형률에 의한 영향으로 인해 동적 압괴 강도가 높아진다는 것은 잘 알려진 사실이다. 본 논문에서는 부재의 정적 하중에 대한 압괴강도 추정법을 소성변형의 운동학적 방법을 이용하여 수행하였다. 종래의 항복하중에 변형률을 고려한 동적 압괴 하중 추정치가 동적 영향을 과대평가하게 되므로 평균 소성변형 응력의 변형률에 대한 영향을 고려하여 튜브부재의 동적 압괴 강도 추정을 유도하였고, 이를 발표된 실험결과와 비교 검토하였다. 본 연구에서 얻은 만족스러운 결과를 토대로 하여 앞으로 이 방법을 선박의 충돌시 선수구조의 충돌에너지 흡수의 추정에 적용시킬 것이다.

• Geomechanics and Engineering
• /
• 제35권2호
• /
• pp.209-219
• /
• 2023

This paper presents numerical investigations into the particle crushing effect on the shear properties of gravel under direct shear condition. A novel particle crushing model was developed based on the octahedral shear stress criterion and fragment replacement method. A series of direct shear tests were carried out on unbreakable particles and breakable particles with different strengths. The evolutions of the particle crushing, shear strength, volumetric strain behavior, and contact force fabric during shearing were analyzed. It was observed that the number of crushed particles increased with the increase of the shear displacement and axial pressure and decreased with the particle strength increasing. Moreover, the shear strength and volume dilatancy were obviously decreased with particle crushing. The shear displacement of particles starting to crush was close to that corresponding to the peak shear stress got. Besides, the shear-hardening behavior was obviously affected by the number of crushed particles. A microanalysis showed that due to particle crushing, the contact forces and anisotropy decreased. The mechanism of the particle crushing effect on the shear strength was further clarified in terms of the particle friction and interlock.

• Steel and Composite Structures
• /
• 제21권3호
• /
• pp.605-628
• /
• 2016

The energy absorption characteristics of diamond core sandwich cylindrical columns under axial crushing process depend greatly on the amount of material which participates in the plastic deformation. Both the single-objective and multi-objective optimizations are performed for columns under axial crushing load with core thickness and helix pitch of the honeycomb core as design variables. Models are optimized by multi-objective particle swarm optimization (MOPSO) algorithm to achieve maximum specific energy absorption (SEA) capacity and minimum peak crushing force (PCF). Results show that optimization improves the energy absorption characteristics with constrained and unconstrained peak crashing load. Also, it is concluded that the aluminum tube has a better energy absorption capability rather than steel tube at a certain peak crushing force. The results justify that the interaction effects between the honeycomb and column walls greatly improve the energy absorption efficiency. A ranking technique for order preference (TOPSIS) is then used to sort the non-dominated solutions by the preference of decision makers. That is, a multi-criteria decision which consists of MOPSO and TOPSIS is presented to find out a compromise solution for decision makers. Furthermore, local and global sensitivity analyses are performed to assess the effect of design variable values on the SEA and PCF functions in design domain. Based on the sensitivity analysis results, it is concluded that for both models, the helix pitch of the honeycomb core has greater effect on the sensitivity of SEA, while, the core thickness has greater effect on the sensitivity of PCF.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.387-388
• /
• 2002

A Brake device for the high-speed impacting object is designed using an axial crushing of thin-walled metal cylinder, Thickness of the cylinder is increased smoothly from the impacting end to the fixed end, resulting in the truncated cone shape. Truncated cone shape ensures that plastic hinges are formed sequentially from impacting end. This increases the reliability of brake device working. Computational and real experiments were performed to verify the effects of conical angle. Results indicate that undesirable sudden rise of crushing load can be prevented by applying appropriate conical angle.

• Steel and Composite Structures
• /
• 제38권1호
• /
• pp.79-86
• /
• 2021

Due to the complex geological conditions, a large number of high quality coal seams was buried in the western of China which cannot be mining in open-pit methods. The dynamic properties of that coal cannot be studied easily in real site for the complex working condition. The compound coal blocks made on the basis of the real situation were studied in the laboratory. The physical and mechanical properties of the compound coal blocks and the raw coal were contrasted by using the UCS tests. The results show that the compound coal blocks made by mixing coal powder, cement and water in proportion of 2.5:2:1 are the closest to that of standard raw coal. Then the propagation of strain waves and crushing effects on the coal were studied in the compound coal blocks by using the super dynamic strain test system and the numerical calculated method of ANSYS/LS-DYNA. The results show that the diameter of the crushing zone in the compound coal blocks was similar to that in the numerical results. The fractures distribution in laboratory tests also has a similar trend to the calculation results. The measured strain waves at the distance of 50 cm, 100 cm, and 150 cm from the center of the charge are mainly concerned at -1.0×104 με and have a similar trend as that in the numerical simulation.

• 한국터널지하공간학회 논문집
• /
• 제14권4호
• /
• pp.321-336
• /
• 2012

암반 절리면과 같이 입자와 연속체 평면의 접촉면에서의 전단거동은 전체 구조물의 거동을 지배할 수 있다. 암반설계의 효율을 높이기 위해서는 입자와 연속체 평면의 접촉면 전단거동 메커니즘에 대한 기초적인 이해와 접촉면 전단강도를 정확하게 산정하는 것이 필수적이다. 본 연구에서는 연속체 평면의 표면 파쇄가 미치는 영향을 알아보기 위하여 개별요소법 수치해석 프로그램인 $PFC^{2D}$를 사용하였다. 표면 거칠기는 매끄러운 평면, 중간 거칠기 평면, 거친 평면의 세 가지로 구분하였다. 입자의 형상은 원형의 one ball 모델과 삼각형 형상의 3 ball 모델로 구성하였다. 평면은 파쇄가 불가능한 경계요소 연속체 모델과 파쇄가 가능한 입자요소 연속체 모델로 각각 구성하였다. 수치해석 결과, 입자요소 모델의 결합강도가 작을수록 파쇄가 빨리 발생하여 큰 결합강도를 가진 연속체 모델보다 작은 접촉면 전단강도를 보였다. 돌출부의 파쇄가 발생한 후, 접촉면 전단강도는 수렴하는 경향을 보이며, 결합강도가 클수록 돌출부의 파쇄가 적게 발생하였다. 또한 경계요소 연속체 모델이 입자요소 연속체 모델보다 큰 접촉면 마찰각을 나타냈고, 모든 입자 모델에서 연속체의 표면 거칠기가 거칠수록 큰 접촉면 마찰각이 나타났다. 이러한 결과로부터 연속체 평면의 거칠기 및 평면 파쇄가 입자와 평면의 접촉면 전단거동 특성에 미치는 영향을 확인하였다.

• 산업기술연구
• /
• 제28권A호
• /
• pp.125-132
• /
• 2008

As of 2003, construction waste has been produced at the level of 130,614.8 tons/day, in which the amount of waste concrete was 92,639.1 tons/day and accounted for about 66.4% of the amount of construction waste. Waste concrete is mainly produced in construction work and civil engineering work. Especially, road surface crushing method using a large amount of water requires thorough management of concrete wastewater. The aim of this study was to analyze water pollution due to concrete wastewater generated in repair of bridge deck using road surface crushing equipment and to suggest reasonable countermeasures for solve the problem. In this study, it was surveyed current conditions of produced concrete wastewater in bridge deck repair, analyzed physical features of concrete wastewater, expected effects of water pollution on inflow rivers if it is not treated, established treatment plan of water pollution by categories, and calculated capacity of each treatment process and required amount of necessary chemicals. As a result of sampling wastewater generated in field sites and testing it at a lab scale, it was revealed that the original wastewater was produced in removing concrete from bridge deck slabs using surface crushing equipment whose pH was 12.53, CODMn was 12.910mg/L, SS was 547.0mg/L, and other heavy metals were included in extremely small quantities.

• 한국철도학회논문집
• /
• 제11권4호
• /
• pp.384-389
• /
• 2008

궤도구성품 중 도상은 레일과 침목으로 전달되는 열차하중을 노반으로 전달하는 중간매개체 역할을 하며, 도상자갈의 열화는 궤도틀림 진전에 직접적으로 영향을 미친다. 본 연구에서는 대형 보선장비(멀티플 타이 탬퍼; MTT; Multiple Tie Tamper)를 사용한 도상다짐작업과 누적통과톤수가 자갈 세립화 및 도상열화의 주요 원인이다. 도상자갈의 열화특성을 파악하기 위하여 시험용 궤도 부설을 통한 현장실험(2장. 실외 실측시험)과 실제의 운행 환경을 모사한 모형실험(3장. 실내 모형실험)을 실시하였고 실제 운용중인 고속선에서 채취한 시료의 파쇄입자 비율과 비교분석하였다.

• 공업화학
• /
• 제16권6호
• /
• pp.842-847
• /
• 2005

니트릴고무(NBR) 신재와 작업현장에서 나온 스크랩을 고온 전단분쇄기술로 분말화한 재료(재생 NBR)를 다양한 혼합비로 블렌드물을 제조하고, 재생재료의 함량에 따른 블렌드물의 가황 거동, 물리적 특성의 변화를 조사하였다. 또한, 열 및 각종 유체에 대한 각 블렌드물의 저항성을 물리적 방법으로 조사하였다. 신재 NBR에 고온 전단 분쇄기술로 제조한 재생NBR을 0~50 phr의 함량으로 블렌드하여 가황거동 및 물리적 특성을 측정한 결과, 가황 거동은 점도가 증가하고 스코치 시간은 감소하였으며, 내열 및 유체특성은 향상되었다.

• 한국자동차공학회논문집
• /
• 제2권1호
• /
• pp.65-72
• /
• 1994

Collapse characteristics of thin-walled hatted section tubes are investigated. The square section members with flanges are substituted by the equivalent rectangular tube. The stiffening effects of flanges are transformed to the restraining plate with the equivalency of buckling strength. The square tubes of single-hatted and double-hatted sections are investigated. The double-hatted section members show symmetric and antisymmetric crushing modes depending on the stiffness of flanges. The single-hatted section members show only symmetric modes. The bifurcation point of the compact crushing modes are investigated by experiments and shown almost same thickness-width ratio of the rectangular tubes. A large maximum crippling strength can be obtained by double-hatted section members with proper flange dimensions.