1 |
Roy, K., Lau, H.H. and Lim, J.B.P. (2019), "Finite element modelling of back-to-back built-up cold-formed stainless-steel lipped channels under axial compression", Steel Compos. Struct., 33(1), 37-66. https://doi.org/10.12989/scs.2019.33.1.037.
DOI
|
2 |
Shariati, M., et al. (2019), "Numerical study on the structural performance of corrugated low yield point steel plate shear walls with circular openings", Steel Compos. Struct., 33(4), 569-581. https://doi.org/10.12989/scs.2019.33.4.569.
DOI
|
3 |
Wang, J., Liu, F. and Zhang, J. (2019), "Investigation on the propagation mechanism of explosion stress wave in nderground mining", Geomech. Eng., 17(3), 295-305. https://doi.org/10.12989/gae.2019.17.3.295.
DOI
|
4 |
Wang, X., et al. (2016), "Power capability and parameters of JWL equation of state for RDX-based PBX", Explosion and Shock Waves, 36(2), 242-247. https://doi.org/10.11883/1001-1455(2016)02-0242-06.
DOI
|
5 |
Yang, H., et al. (2019), "Intelligent design of retaining wall structures under dynamic conditions", Steel Compos. Struct., 31(6), 629-640. https://doi.org/10.12989/scs.2019.31.6.629.
DOI
|
6 |
Zhou, Y. and Gao, P. (2012), "Analysis on hydrological features of No.4 minefield in jiangcang mining area of Qinghai - Tibet plateau", Coal Sci. Technol., 40(7), 104-111. https://doi.org/10.13199/j.cst.2012.07.107.zhouym.003.
DOI
|
7 |
Behrouz, K. and Maziar, J. (2019), "A new size-dependent shear deformation theory for wave propagation analysis of triclinic nanobeams", Steel Compos. Struct., 32(2), 213-223. https://doi.org/10.12989/scs.2019.32.2.213.
DOI
|
8 |
Ananthi, G., et al. (2019), "Testing, simulation and design of back-to-back built-up cold-formed steel unequal angle sections under axial compression", Steel Compos. Struct., 33(4), 595-614. https://doi.org/10.12989/scs.2019.33.4.595.
DOI
|
9 |
Ashtari, M., et al. (2019), "Evaluation of the single compressive strength test in estimating uniaxial compressive and Brazilian tensile strengths and elastic modulus of marlstone", Engineering Geology, 248, 256-266. https://doi.org/10.1016/j.enggeo.2018.12.005.
DOI
|
10 |
Barbosa, R.A., et al. (2018), "Influence of alkali-silica reaction and crack orientation on the uniaxial compressive strength of concrete cores from slab bridges", Constr. Build. Mater., 176, 440-451. https://doi.org/10.1016/j.conbuildmat.2018.03.096.
DOI
|
11 |
Dalin, X., et al. (2013), "JWL equation of state parameters prediction of RDX-based aluminized explosive based on KHT code", Transactions of Beijing Institute of Technology, 33(3), 239-243. https://doi.org/10.15918/j.tbit1001-0645.2013.03.003.
DOI
|
12 |
Fei, L., et al. (2018), "Test and analysis of blast wave in mortar text block", Int. J. Rcok Mech. Mining Sci., 108, 80-85. https://doi.org/10.1016/j.ijrmms.2018.06.003.
DOI
|
13 |
Mousavi, E., Cheshomi, A. and Ashtari, M. (2019), "Estimating elasticity modulus and uniaxial compressive strength of sandstone using indentation test", J. Petroleum Sci. Eng., 169, 157-166. https://doi.org/10.1016/j.petrol.2018.05.056.
DOI
|
14 |
Fei, L., et al. (2019), "Influence of explosives distribution on coal fragmentation in top-coal caving mining", Geomech. Eng., 18(2), 111-119. https://doi.org/10.12989/gae.2019.18.2.111.
DOI
|
15 |
Jalali, S.H., et al. (2019), "Predicting of uniaxial compressive strength of some igneous and metamorphic rocks by block punch index and cylindrical punch index tests", Int. J. Rock Mech. Mining Sci., 119, 72-80. https://doi.org/10.1016/j.ijrmms.2019.04.013.
DOI
|
16 |
Kury, J.W., et al. (1965), "Metal Acceleration by Chemical Explosives", Fourth Detonation Symposium, 3-13.
|
17 |
Lee, E.L., Hornig, H.C. and Kury, J.W. (1968), Adiabatic Expansion of High Explosive Detonation Products, Report UCRL-50422, University of California, Lawrence Radiation Laboratory, Livermore, CA, USA.
|
18 |
Li, D., et al. (2014), "Numerical simulation of detonation parameters for PETN, RDX and HMX explosives", Explosion and Shock Waves, 25(4), 325-329. https://doi.org/10.1360/biodiv.050084.
DOI
|
19 |
Rao, R. and Sasmal, S. (2019), "Detection of flaw in steel anchor-concrete composite using high-frequency wave characteristics", Steel Compos. Struct., 31(4), 341-359. https://doi.org/10.12989/scs.2019.34.1.341.
DOI
|