• Restorative Dentistry and Endodontics
• /
• v.8 no.1
• /
• pp.53-59
• /
• 1982

An in vitro study was performed in order to evaluate the restoring methods in the endodontically treated molar teeth. 68 extracted teeth were divided into 4 groups according to the restoring techniques. The teeth of first group were restored by amalgam. Those of second group were restored by the stainless steel post and amalgam. The teeth of the third group were restored by the amalgam with crown. The teeth of the fourth group were restored by the stainless steel post and amalgam core with crown. All the specimens were tested and measured for the fracture load by means of the Instron (UTM-111-500 Toyo Baldwin Co., LTD. Japan) and the Pressure Instrument (Yonsei University, Department of Metal Engineering.) The results were as follows; 1. There were no statistical differences in the fracture loads between the amalgam restoration and post-amalgam core restorative techniques. 2. The techniques of amalgam core with crown showed lower fracture loads those of post and amalgam core with crown. 3. In the crowned teeth, they presented higher fracture loads than those without crown.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.45 no.5
• /
• pp.254-259
• /
• 2019

Objectives: Crown-root fracture and cervical caries in maxillary premolars constitute a challenge in cases of subgingival placement of restoration margins. Surgical extrusion has been practiced successfully in permanent anterior teeth. The aim of the present retrospective study was to assess the clinical outcome of surgical extrusion after orthodontic extrusion in maxillary premolars. Materials and Methods: Twenty-one single, tapered root maxillary premolars with subgingival crown-root fracture or caries were included. Presurgical orthodontic extrusion was performed on all teeth to prevent root resorption. Extent of extrusion and rotation was determined based on crown/root ratio. The postoperative splinting period was 7 to 14 days. Clinical and radiographic examination was performed at an interval of 1, 2, and 3 months. Results: After the mean follow-up of $41.9{\pm}15.2months$, failure was observed as increased mobility in 3 of 21 cases. No significant difference was observed in the outcome of surgical extrusion based on tooth type, age, sex, $180^{\circ}$ rotation, or time for extraction. Furthermore, marginal bone loss was not observed. Conclusion: Surgical extrusion of maxillary premolars can be a possible therapeutic option in cases of subgingival crown-root fracture.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.19 no.1
• /
• pp.35-41
• /
• 2003

With the understanding of tooth crown biomechanics and the progress of dentin adhesives, bonded porcelain restorations including a porcelain laminate veneer present an extended spectrum of indications for anterior teeth. Porcelain laminate veneer as a restoration offers the conservative solution that balances the functional and esthetic needs of the anterior dentition. Porcelain's stiffness, its surface characteristics, and the biomechanical strength achieved through bonding to tooth surface enable the restoration of the tooth as a whole supporting occlusal force and masticatory function. Namely, the optical effects inherent in the tooth and the lifelike features of the porcelain make that this restoration approaches the ultimate in esthetic satisfaction for both the dentist and the patient. A 49-year-old female patient with the incisal discoloration of upper central incisors and black triangle between the central incisors was referred to correct her esthetic problems with prosthodontic approach. The patient was satisfied with two porcelain laminate veneers that were made according to prof. Magne and Belser's recommendation.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.6 no.1
• /
• pp.18-31
• /
• 1997

By the concerns of esthetic restoration were increased recently. many all ceramic crowns were developed. But they except In-Ceram Alumina were used only single crown. In-Ceram Alumina, developed by Dr. Sadon, was revealed to have high flexural Strength(450MPa). So it could be used not only anterior bridges but also posterior bridges. But In-Ceram Alumina was seen to be opaque, a little green color in transillumination light by high content of alumina oxide(85%). So new all ceramics with high strength and high translucence were needed. Spinell($MgAl_2O_3$) have a high melting point, high flexural strength, low heat conductivity, high light conductivity. In-Ceram Spinell offers glasslike light transmission by using the spinell cores instead of the alumina cores. And they have a high translucency like to natural tooth, an excellent margin integrity and a high strength(350MPa). The purposes of this study are 1) to know about the construction method of In-Ceram Spinell System, 2) to investigate the its clinical possibiliy through patients and literature reviews.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.4
• /
• pp.805-812
• /
• 1997

Despite dentistry's attempts to improve the dental health of the public and to minimize the effects of caries, many children still present with extensive destruction of primary anterior teeth. One of dentistry's most challenging tasks is to repair these teeth with restoration which are durable, retentive, and esthetic. Esthetic restoration can often be achieved with polycarbonate crowns, strip crowns, conventional S-S crowns, open-faced S-S crowns, commercially veneered S-S crowns. But, all of these have limitation. Advances in restorative materials and metal-bonding procedures have made possible new restorative techniques that combine the advantages of S-S crowns with the cosmetics of composite restoration methods. The described technique of bonding composite to trimmed and fitted S-S crowns offers many advantages over other techniques currently used to restore primary anterior teeth. 1. If S-S crowns are accurate trimmed and contoured, good retention of crowns is achieved. 2. The patient time required is similar to that of conventional S-S crowns. 3. Good esthetics and high bond strengths are achieved. 4. It is possible to use this veneering technique intraorally on crowns that have fractured veneers.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.3
• /
• pp.202-223
• /
• 2020

This purpose of this article is to identify the original form of the gilt-bronze ornamental pieces unearthed from the east part of the third wooden coffin in the Naju Bogam-ri Jeongchon (NBJ) tombs. The gilt-bronze ornamental pieces were all small, measuring less than 3cm in size and about 0.2cm in thickness, and only 19 or more small pieces were identified. In each piece of gilt decoration, a circular perforation, convex pattern, leaf-shaped spangle (瓔珞), 2 small holes for attaching spangles and gilt-bronze thread, 2 small holes for unknown purposes, and a continuous dot pattern of about 0.05 cm can be observed. As a result, it was judged that the gilt-bronze pieces excavated from the NBJ No. 1 chamber were part of the Headband Crown. Therefore, type 1 and type 3 of the gilt-bronze pieces were determined to be part of the Headband, and type 2 to be part of the Vertical Ornaments. Based on previous results, two types of restoration were proposed for NBJ No. 1 tomb gilt-bronze ornaments. In the first restoration proposal, there are wave-shaped dot patterns on the top and bottom of the crown, and the middle decoration is a spangle, circular perforation and spangle and a convex-pattern. In the second restoration plan, one row of convex patterns was added among the decorations in the middle of the first. The same type of vertical ornament was found in the Sochang (小倉) collection crown, but the overall structure and shape of the crown were completely different. On the other hand, the use of small holes of unknown use, as seen in the crown, was presumed to represent holes for fixing to a cap of organic matter. The restored NBJ No. 1 tomb gilt-bronze crown is characterized by circular punching, which makes it difficult to find an analogy in the other Three Kingdoms-period crowns. Unlike the existing halls in Gaya, Mahan, and Baekje, each district has a unique shape and decoration. The gilt-bronze crown excavated from NBJ No. 1 tomb is thought to reflect these characteristics.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.2
• /
• pp.145-152
• /
• 2012

Whenever pediatric dentists choose the preformed stainless steel crowns for restoration of primary molars, we usually prefer the crown forms that most fit to the abutment teeth. Despite some previous reports on significant ethnic difference in the size and shape of tooth crowns in primary dentition, only the imported products have been available to date, which might show some discrepancy with tooth anatomy of Korean. However, a domestic product of preformed stainless steel crown has been marketed recently that is expected to show more accurate fit to the primary tooth of Korean. To investigate the morphological characteristics of primary molars of Korean children, their mesiodistal and buccolingual diameters from the dental casts of 263 children in Pusan and Kyungsangnamdo province were measured by digital calipers. The measured data were compared with those of the three types of preformed stainless steel crowns(3M ESPE Stainless Steel Primary Molar Crown, Kids Crown, Sankin Anatom Primary Crown) by statistical processes with regression analysis. The results were as follows: 1. In every primary molar crown of three brands, the bucco-lingual width to mesio-distal width ratio (MD-BL ratio) showed higher values compared with those of natural teeth. 2. While the products of 3M ESPE and Shinhung showed similar features, those of Sankin showed some difference from both, and these difference was more marked in mandibular primary molars. 3. The nearer is the mesio-distal width of the crown to the average, the better was the adaptation of the preformed crown, and the reverse was true. 4. The teeth which revealed more discrepancy between preformed crown and natural tooth were upper and lower first primary molars.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.2
• /
• pp.152-160
• /
• 2011

Purpose: The aim of this study was to evaluate the volumetric change of teeth after preparation for various designs and margin locations through Micro CT analysis (Skyscan 1076: SKYSCAN, Konitch, Belgium). Materials and methods: The 36 artificial teeth were used to determine reduction volume of upper central incisor. According to the restorative design these 36 teeth were divided into 4 groups and according to the marginal location each group was divided into 3 subgroups. The volume of unprepared teeth was obtained by using Micro CT and the volume of prepared teeth was obtained in the same method. The CT scanned images before and after preparation were superimposed. Results: The volume difference was significantly increased as follows: traditional laminate veneer < full laminate veneer < all ceramic crown < metal ceramic crown. One-way ANOVA and Tukey multiple comparison analyses were used to analyze the data in this study. In each group the volume difference was significantly increased as follows: 1 mm above CEJ < CEJ < 1 mm below CEJ (P<.05). The % volume difference of all ceramic crown and metal ceramic crown was 31 - 48% and that of laminate veneer was 14 - 30%. The volume difference of the traditional laminate veneer was 1/3 of that of metal ceramic crown. The full laminate (1 mm below CEJ) and all ceramic crown (1 mm above CEJ) showed a similar volume difference. Metal ceramic crown showed 13.7% more volume difference than all ceramic crown. Conclusion: There exists the difference in volumetric change according to designs of restoration and margin locations of preparation.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.25 no.1
• /
• pp.4-14
• /
• 2016

Although CAD/CAM technology has been used in dentistry for more than decades, the present CAD/CAM dentistry is still quite inefficient or unesthetic. Zirconia restoration has faced with two contradictory words, 'Efficiency' and 'Esthetics'. One can consider monolithic zirconia restoration to be efficient with CAD/CAM. The monolithic zirconia restoration, however, is rarely esthetic due to the current limitations with zirconia. On the contrary, porcelain build-up is almost indispensible in fabricating esthetic restoration, especially in anterior region. In this article, the current status of monolithic zirconia restoration and clinical cases will be presented.

• Proceedings of the Korean Society of Veterinary Clinics Conference
• /
• 2006.05a
• /
• pp.203-203
• /
• 2006