• Elastomers and Composites
• /
• 제53권3호
• /
• pp.124-130
• /
• 2018

Recently, microwaves have been used for desulfurization because they can selectively dissociate C-S and S-S bonds present in vulcanized rubber. In this study, we investigated the changes in structural and physical properties of EPDM (Ethylene propylene diene monomer) rubber by irradiating it with microwaves for different durations. The surface chemical composition of the irradiated EPDM rubber was analyzed by FT-IR, XPS, and EDS analyses. It was confirmed by XPS that C-S and S-S S2p peak heights greatly decreased when microwave irradiation was performed for more than 5 min. In the EPDM sample irradiated with microwaves for 10 min, the number of S-O bonds significantly increased owing to oxidation. As the microwave irradiation time was increased, SEM images showed cracks and voids on the EPDM surface. The 20% decomposition temperature of the EPDM rubber sample was investigated by TGA, and it was found to be about $435.23^{\circ}C$ for the EPDM rubber irradiated for 10 min. The crosslinking density of the EPDM rubber was determined by measuring the degree of swelling, and the highest value was observed for the E5 sample irradiated for 5 min. The degree of swelling of the E10 sample irradiated for 10 min was lower than that of the E5 sample. These results indicate that when irradiated with microwaves for more than a certain time, desulfurization occurs and the side chain of the EPDM rubber dissociates and forms additional crosslinking bonds.

• 멤브레인
• /
• 제15권4호
• /
• pp.281-288
• /
• 2005

생체 적합성이 우수한 히아루론산과 생분해성이 우수한 폴리 락타이드의 이량체를 결합하여 약물 방출 시스템에 적용할 수 있는 생체 재료를 제조하고자 하였다. 냉동 건조법을 이용하여 히아루론산과 락타이드를 가교제 1-ethyl-3-(3-dimethyl aminopropyl) carbodiimide (EDC)로 가교시켰다. 생성된 막을 핵자기 공명 분광법으로 분석하여 락타이드 반응도와 EDC 반응도를 결정하였다. 히아루론산에 대한 락타이드 몰비, 가교제 농도가 증가할수록 혹은 가교 온도가 감소할수록, 락타이드 반응도가 증가하였으며 팽윤도는 감소하였다. 서로 다른 락타이드 반응도를 가진 막으로 약물 방출 실험을 수행한 결과 락타이드 반응도가 증가하면 약물 방출 속도가 감소하는 경향을 보였다. 또 친수성이 다른 여러 가지 약물로 약물 방출 실험을 수행한 결과 친수성이 우수한 약물일수록 서서히 방출되었다.

• 동력기계공학회지
• /
• 제19권5호
• /
• pp.86-92
• /
• 2015

p-DCPD were prepared by in-suit ROMP polymerization using $MoCl_5$ and $Et_2AlCl$. The results showed that $MoCl_5:Et_2AlCl:DCPD$ mole ratio of 1:2.0:350 had the curing-time of 60sec and crosslinking degree of 90.44%. The curing time of DCPD polymerization by $MoCl_5/Et_2AlCl$ was shortened, and monomer conversion and crosslinking degree were decreased with temperature and the number of moles of $MoCl_5$ and $Et_2AlCl$. $MoCl_5$ and $Et_2AlCl$ is damaged its function by the reaction with the air in the atmosphere and did't proceed the polymerization properly.

• KSBB Journal
• /
• 제6권3호
• /
• pp.249-254
• /
• 1991

Permeabilization of Zymomonas mobilis with CTAB(Cetyltrimethylammoniumbromide) was investigated in order to obtain stable process for sorbitol production in the immobilized system. The optimum conditions for sorbitol formation were obtained in the case of using cells treated with 0.2% CTAB at$ 4^{\circ}C$ for 10 min. Permeabilized cells were treated with glutaraldehyde to cross-link the internal enzyme for the improvement of the enzyme stability. In this way, no significant loss of enzyme activity was apparent during 30-day operation in a continuous process. The productivity of the continuous process at dilution rate 0.2h-1 was 6.51g/1/h for sorbitol. The CTAB permeabilized cells could be used to produce sorbitol in the long term continuous process.

• Journal of Microbiology and Biotechnology
• /
• 제25권6호
• /
• pp.814-819
• /
• 2015

The natural crosslinking agent genipin has been applied widely in biomedicines and foods nowadays. Because of the special hemiacetal ring structure in its molecule, it can only be prepared by hydrolysis of geniposide according to biocatalysis. In this research, strategies including aqueous-organic biphasic catalysis and substrate fed-batch mode were adopted to improve the biocatalysis process of genipin. A 10 L ethyl acetate-aqueous biphasic system with geniposide fed-batch led to a satisfying genipin yield. With Fusarium solani ACCC 36223, 15.7 g/l genipin in the ethyl acetate phase was obtained, corresponding to space-time yields of 0.654 g l^-1 h^-1.

• 한국전자통신학회논문지
• /
• 제6권1호
• /
• pp.43-48
• /
• 2011

본 논문에서는 현재 사용되어지고 있는 고분자 습도센서의 내수성 특성 결함현상을 파악하고, 불량의 원인규명을 목적으로 한다. 또한, 유추된 불량의 원인에 대한 진행과정을 구현하고자 불량시료와 개선된 고분자습도센서를 제작하여 불량시편과 개선시편에 대해 고온고습($60^{\circ}C/95%$) 시험조건을 기준으로 하여 모의시험을 행하였다. 그 결과를 통해 내수성 결함 및 그에 대한 원인을 파악 하였고, 결함 메커니즘을 제시하였다.

• 대한의용생체공학회:의공학회지
• /
• 제9권1호
• /
• pp.67-72
• /
• 1988

Poly (HPMA/NVP) hydrogel was synthesized according to the composition and the con- centration of the crosslinking agent. The swelling degree of the P(HPMA/NVP) hydrogel decreased with increasing of P(HPMA) composition and crosslinking agent. The glass transi- tion and softening temperatures of the P(HPMA/NVP) increased with increasing of P(HPMA) composition. The composition of P(HPMA/NVP) : 70/30 and the concentration of the crosslin- king agent of 0.5 wt % gave the optimum condition in the application to the contact lens. There were also adequate in the mechanical, refractive properties and in vivo test in the P(HPMA/ NVP): 70/30 system.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2001년도 가을 학술발표회 논문집
• /
• pp.324-325
• /
• 2001

Poly(vinyl alcohol) (PVA) is useful for biomaterials such as contact lens, drug delivery system, and biological tissues, because of good biocompatibility and no toxicity. Particularly, hydrogels have unique position in biomaterial fields because of their high water contents.[1-2] Because atactic PVA (a-PVA) is very weak in water, a-PVA need to be chemically crosslinked with crosslinking agent such as glutaradehyde to prepare PVA hydrogels with high water-resistance and good physical properties.[3] (omitted)

• Journal of Photoscience
• /
• 제6권3호
• /
• pp.145-151
• /
• 1999

The use of O-carbamoyloximes as photobase generators was investigated. $\alpha$-Meth-ylbenzilydeneamino phenylcarbamate(2a) and $\alpha$-methyl benzilydeneamino cyclohexylcarbamate(2b) were prepared by the reaction of phenyl or cyclohexyl isocyanates with acetophenone oxime , respectively. Aniline, phenylhydrazine and N, N'-diphenylhydrazine were detected in thephotolysis of 2a and cyclohexylamine and cyclohexylhydrazine in the photolysis of 2b. A monomer having pendant carbamoyloxyimino groups (BGM) was prepared by the reaction fo methancryloyloxyethyl iocyanate with acetophenone oxime, and copolymerized with styrene. The BGM copolymer films turned insoluble on UV irradiation, and the degree of insolubilizationwas increased by post-baking. The photocrosslinking was thought to be due to coupling of resulting pendant aminyl radicals, and the thermal crosslinking was due to association of resulting amino and hydrazino groups by hydrogen bonding. The introduction of epoxy groups into polymer increased the degree of thermal crosslinking by post-baking.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2004년도 춘계학술발표회 논문집
• /
• pp.97-100
• /
• 2004