• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.994-999
• /
• 2003

A modeling method for the modal analysis of a rotating cross-ply composite beam based on Timoshenko beam theory is presented. To analyze the composite beam exactly, the effects of shear deformation and rotary inertia are included. Linear differential equations of motion are derived using the assumed mode method. For the modeling, hybrid deformation variables are employed and approximated to derive the equations of motion. The effects of the dimensionless angular velocity and the slenderness ratio parameter on the variations of modal characteristics are investigated

• 대한기계학회논문집A
• /
• 제21권6호
• /
• pp.981-987
• /
• 1997

Modern helicopter rotor blades with non-homogeneous cross section composed of anisotropic material rquire highly sophisticated structural analysis. Variation in cross section geometry makes this task of analysis more complicated. Since rotor blades generally are much longer than their lateral dimensions, one-dimensional models seem feasible, at least from a computational point of view. Therefore determination of the principal coordinate system is very important to remove the structural coupling for one-dimensional beam modelling. In this study, shear center, and principal direction. The method will be verified by comparing the results with confirmed experimental results.

• 대한조선학회지
• /
• 제23권4호
• /
• pp.1-10
• /
• 1986

A container ship, due to wide hatch openings, has characteristics of poor torsional rigidity, strong coupling of horizontal-torsional modes and significant discontinuity in the longitudinal variation of hull sections. In the mathematical formulation of the problem the hull is modeled as a beam and the transfer matrix method is utilized. The cross decks between cargo hatch opening are separated from the main hull and regarded as equivalent springs restraining torsion of hull. The effect of shear deformation of ship-side plating on torsion is taken into account in addition to St. Venant's and bending torsional rigidities. Compatibility requirements at cross section discontinuity are approximately considered. Developing the practical calculation procedure and the computer programs for application to an actual ship, some parametric studies on modeling methods of the cross deck, the compatibility condition, added-mass center etc. are out for the purpose of comparison.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.261-266
• /
• 2006

A number of different techniques are available to mitigate the problem of cross correlations caused by the limited dynamic range of the 10-bit Gold codes in the GPS C/A code. These techniques include successive-interference cancellation (SIC) and parallel-interference cancellation (PIC), where the strong signals are subtracted at IF prior to attempting to detect the weak signals. In this paper, a variation of these techniques is proposed whereby the subtraction process is delayed until after the correlation process, although still employing a pure reconstructed C/A code signal to permit prediction of the cross correlation process. The paper provides details on the method as well as showing the results obtained when the method was implemented using a software GPS receiver. The benefits of this approach are also described, as is the application of the method to the cancellation of CW interference.

• 소음진동
• /
• 제2권4호
• /
• pp.305-315
• /
• 1992

In order to investigate the effects of layer-wise in-plane displacements on vibration and damping characteristics of composite laminated plates, the finite element method based on the generalized laminated plate theory(GLPT) has been formulated. Specific damping capacity of each mode was obtained by modal strain energy method. To see the effect of transverse shear on deformation, the strain energy of stress components was computed. The accuracy of this study was examined for the cylindrical bending vibration of cross-ply plate strip. The results were very accurate compared with 3-D solutions. The numerical results show that through-thickness variation of in-plane displacements has not so much influence on the natural frequency, but has a great influence on the damping of composite plates, especially on the damping of thick composite plates since the damping is affected by local behavior while the natural frequency is affected by global behavior.

• 대한원격탐사학회지
• /
• 제11권1호
• /
• pp.19-29
• /
• 1995

The surface velocities were estimated by the Maximum Cross Correlation(MCC) method and an inverse method from AVHRR/SST. In the results of MCC, discontinuous flow fields were estimated in the case that cross correlation coefficient was above 0.5 but these flow pattern disappeared when cross correlation coefficient was above 0.9. This estimation was conspicuous near SST patterns of eddies. In the results of inverse method, flow field was continuous and eddy motion was estimated definitely but the velocity was overstimated in compared with MCC result over the area of small temperature gradient. This result may be due to temperature error included in SST calculated and spatial variation of heat flux.

• Nuclear Engineering and Technology
• /
• 제7권2호
• /
• pp.119-126
• /
• 1975

핵임계 사고시에 방출되는 즉발중성자 스펙트럼을 두개의 스펙트럼 매개변수를 갖는 일반화된 Cranberg 식으로 표시할 수 있다고 가정한 다음, 이들 매개변수를 변화시키면서 몇개의 발단 방사화검출체에 대한 평균핵반응단면적의 변화를 고속전자계산기로 계산하였다. 평균핵반응 단면적은 스펙트럼 변화에 따라 민감하게 변화하는데 발단 방사화 에너지가 높을수록 그 변화정도가 심한것 같았다.

• Communications for Statistical Applications and Methods
• /
• 제30권2호
• /
• pp.179-189
• /
• 2023

Hybrid sufficient dimension reduction (SDR) methods to a weighted mean of kernel matrices of two different SDR methods by Ye and Weiss (2003) require heavy computation and time consumption due to bootstrapping. To avoid this, Park et al. (2022) recently develop the so-called cross-distance selection (CDS) algorithm. In this paper, two variations of the original CDS algorithm are proposed depending on how well and equally the covk-SAVE is treated in the selection procedure. In one variation, which is called the larger CDS algorithm, the covk-SAVE is equally and fairly utilized with the other two candiates of SIR-SAVE and covk-DR. But, for the final selection, a random selection should be necessary. On the other hand, SIR-SAVE and covk-DR are utilized with completely ruling covk-SAVE out, which is called the smaller CDS algorithm. Numerical studies confirm that the original CDS algorithm is better than or compete quite well to the two proposed variations. A real data example is presented to compare and interpret the decisions by the three CDS algorithms in practice.

• 대한원격탐사학회지
• /
• 제34권4호
• /
• pp.639-647
• /
• 2018

This paper presents TerraSAR-X and KOMPSAT-5 sigma nought variation according to season and antenna observation configuration in Mongolia. Two types of landcover including bare surface and cropland were examined. The seasonal variation of sigma nought in cropland was about 7 dB and particularly a significant sigma nought reduction occurred after harvest. On the contrary, the Mongolia bare surface provides a consistent sigma nought values for several years with an annual variation less than 2.5 dB of standard deviation. However, the bare soil was relatively sensitive to look-direction (or ascending or descending mode) as well as incidence angle while the cropland was almost independent of antenna look-direction and small incidence angle changes. Although the look-directional variation of bare surface sigma nought was observed in this study, the look-direction anisotropic nature of the surface was not well examined. A further study would be required to account for this feature with various SAR observation configurations.

• 대한인간공학회지
• /
• 제36권2호
• /
• pp.123-144
• /
• 2017

Objective: The objective of this study is to evaluate affection on how users perceive colors viewed from an automotive visual display according to cultural and radical differences including North America, Europe, and Southeast Asia. This study especially aims to identify effects of the variation of tone and chroma of representative color groups by analyzing affection differences depending on cultural and racial differences targeting the colors constituted through variation of tone and chroma, centered on representative colors. Background: The colors of the menu, information display or background viewed through an automotive visual display are an important factor stimulating consumer's affection, and therefore an effort to express the vehicle's brand and product image through colors is made. The studies on colors focus only on the research on unique characteristics of colors, but an affective approach lacks according to cultural and racial differences on colors considering tone and chroma variation within a color from the currently used automotive visual displays. Method: To grasp the visual affection felt by users, this study extracted affective adjectives related with colors through existing literature and a dictionary for adjectives, and presented human affection dimensions on colors through evaluation of various colors. Prior to carrying out affection evaluation, the basic light sources, red (R), green (G), and blue (B) constituting the colors used for automotive visual displays were defined as a representative color group, respectively. When colors in a color group are constituted, the evaluation target of each color group consisted of the colors considering the variation of tone and chroma by changing color sense through RGB values of the remaining two light sources. And then, this study carried out affection evaluation on the constituted colors targeting the subjects with cultural and racial differences. Results: As a result of evaluating the constituted colors with representative affections, there were statistically significant differences between the groups having cultural and racial differences. As a result of S-N-K post-hoc analysis on the colors showing significant differences, North America and Europe were classified as heterogeneous groups. In some cases, Korea was classified as the homogeneous group with North America, but Korea was mainly classified as the homogenous group with Europe. Conclusion: The representative affections on colors from an automotive visual display was drawn as three affective dimensions: passionate, neat, and masculine. Based on these, the affection of Korea and Europe on the constituted colors showed significant differences from that of North America, as a result of affection evaluation on the constituted colors viewed through the visual display by reflecting cultural and racial factors. Regarding representative color groups, bigger cultural and racial differences were revealed in terms of affection on red and green colors than on blue color, and variation of affection was the biggest in the red color. Application: This study analyzed correlations of affection considering the colors constituted through variation of tone and chroma, and the culture and race in the representative color groups constituting a visual display. The results of this study are predicted to be utilized in coordination and selection of colors viewed from an automotive visual display taking into account culture and race.