• Journal of the Korean institute of surface engineering
• /
• v.35 no.5
• /
• pp.289-294
• /
• 2002

ZnTe films have been grown on (100) GaAs substrate with two representative problems. The one is lattice mismatch, the other is thermal expansion coefficients mismatch of ZnTe /GaAs. It claims here, the relationship of film thickness and defects distribution with (100) ZnTe/GaAs using hot wall epitaxy (HWE) growth was investigated by transmission electron microscopy (TEM). It analyzed on the two-sort side using TEM with cross-sectional transmission electron microscopy (XTEM) and high-resolution electron microscopy (HREM). Investigation into the nature and behavior of dislocations with dependence-thickness in (100) ZnTe/ (100) GaAs hetero-structures grown by transmission electron microscopy (TEM). This defects range from interface to 0.7 $\mu\textrm{m}$ was high density, due to the large lattice mismatch and thermal expansion coefficients. The defects of low density was range 0.7$\mu\textrm{m}$~1.8$\mu\textrm{m}$. In the thicker range than 1.8$\mu\textrm{m}$ was measured hardly defects.

• Proceedings of the KIEE Conference
• /
• 1997.07e
• /
• pp.1672-1674
• /
• 1997

In this paper, the penning effect was studied to control accelerating of the ionization that means increasing of cross-sectional collision through penning reactions in the plasma cells of Hg-Ar-Ne (x:10-x, 60Torr) gas discharge under various concentrations of Ar.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.259-261
• /
• 1999

In this paper, we investigated the frequency dependences of AC loss and the magnetic properties of a superconductor using magnetization method. We used the YBCO bulk superconductor sample which has a square-shaped cross sectional area of $6mm{\times}6mm$. and 43mm-long in axial direction. The applied AC magnetic field was parallel to the direction of sample axis. It is observed that YBCO bulk has the diamagnetic properties. AC loss calculation of YBCO bulk superconductor was performed by evaluating the total area of magnetization traces. We performed two cases of experiments, one for $B_m<B_p$ and the other for $B_m<B_p$. The experiments showed that the AC loss dependences on frequency were different in each mode, as was indicated in other publications.

• Communications for Statistical Applications and Methods
• /
• v.27 no.2
• /
• pp.241-254
• /
• 2020

This study proposes generalized models of joint latent class analysis (JLCA) for longitudinal data in two approaches, a JLCA with latent profile (JLCPA) and a JLCA with latent transition (JLTA). Our models reflect cross-sectional as well as longitudinal dependence among multiple latent classes and track multiple class-sequences over time. For the identifiability and meaningful inference, EM algorithm produces maximum-likelihood estimates under local independence assumptions. As an empirical analysis, we apply our models to track the joint patterns of adolescent depression and anxiety among US adolescents and show that both JLCPA and JLTA identify three adolescent emotional well-being subgroups. In addition, JLCPA classifies two representative profiles for these emotional well-being subgroups across time, and these profiles have different tendencies according to the parent-adolescent-relationship subgroups.

• Nuclear Engineering and Technology
• /
• v.54 no.10
• /
• pp.3672-3681
• /
• 2022

This study investigates the environmental footprint impacts of nuclear energy consumption in the presence of environmental technology and globalization of the ten largest ecological footprint countries from 1990 up to 2017. By considering a set of methods that can help solve the issue of cross-sectional dependence, we employ the Lagrange multiplier bootstrap cointegration method, Driscoll-Kraay standard errors for long-run estimation and feasible generalized least squares (FGLS) and panel-corrected standard errors (PCSE) for robustness. The finding revealed significant negative effects of nuclear energy consumption, environmental-related technology, population density and significant positive effects of globalization and economic growth on ecological footprint. These results are also robust by assessing the long-run impacts of predictors on carbon footprint and CO₂ emissions as alternate ecological measures. These conclusions provide the profound significance of nuclear energy consumption for environmentally sustainable development in the top ten ecological footprint countries and serve as an important reference for ecological security for other countries globally.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.9 no.4
• /
• pp.552-560
• /
• 1997

Analysis is performed to determine the optimal lengths or cross-sectional areas of refrigerator-cooled current leads that can be applied to the conduction-cooled superconducting systems. The binary current lead is composed of the series combination of a normal metal at the upper(warm) part and a high $T_c$ superconductor(HTS) at the lower(cold) part. The heat conduction toward the cold end of HTS part constitutes a major refrigeration load. In addition, the joint between the parts should be cooled by a refrigerator in order to reduce the load at the low end and maintain the HTS part in a superconducting state. The sum of the work inputs required for the two refrigeration loads needs to be minimized for an optimal operation. In this design, three simple models that depict the refrigeration performance as functions of cooling temperature are developed based on some of the existing refrigerators. By solving one-dimensional conduction equation that take into account the temperature-dependent properties of the materials, the refrigeration works are numerically calculated for various values of the joint temperature and the sizes of two parts. The results show that for given size of HTS, there exist the optimal values for the joint temperature and the size of the normal metal. It is also found that the refrigeration work decreases as the length of HTS increases and that the optimal size of normal metal is quite independent of the size of HTS. For a given length of HTS, there is an optimal cross-sectional area and it increases as the length increases. The dependence of the optimal sizes on the refrigerator models employed are presented for 1kA leads.

• Korean Journal of Health Education and Promotion
• /
• v.26 no.4
• /
• pp.71-81
• /
• 2009

Objectives: This study furthers the currents understanding of alcohol use disorders, stress, mental health status and suicide among Seoul citizens. This study is to identify differences according to socio-demographic variables and variables which affect stress, mental status and suicide for developing mental health programs. Methods: The study subjects using cluster-stratified sampling method were 1234 adults over 19 years old from 17 dong, S-Ku in Seoul City. A cross-sectional study with face-to-face interview was used to collect data. A questionnaire measuring socio-demographic variables, Symptom Checklist-90-Revised (SCL-90-R) and psychosocial wellbeing index-short form (PWI-SF) was utilized. Results: Three findings in this study were discussed: (1) The prevalence of problem drinking and alcohol dependence and AUDIT score were significantly higher among male, younger age, and high level of education and income; (2) AUDIT score were related with stress, all 9 symptoms of SCL-R and suicide plan; (3) Problem drinkers were more likely to have 2.5 times of anxiety, 3.0 times of hostility, and 2.4 times psychoticism than non alcohol problem drinkers. Alcohol dependence drinkers were more likely to have 1.9 times of high risk group of stress, 4.1 times of obsessive-compulsive, 4.7 times of anxiety, 5.5 times of hostility, and 2.3 times psychoticism than non alcohol dependence drinkers. Conclusion: The findings suggest that the future intervention of Mental Health programs should be carefully designed and tailored by socio-demographic variables.

• Management & Information Systems Review
• /
• v.38 no.1
• /
• pp.121-139
• /
• 2019

This study aims to identify the change of customer participation(CP) which is essential to the service industry as the relationship between the customer and the employee develops. The latent growth modeling analysis based on the longitudinal data is utilized to examine the pattern of the change. This is based on the fact that CP needs to be understood in the relationship and is to confirm the change in CP by the development of the relationship. Given the dynamics of the relationship, we intend to overcome the limitations of previous cross-sectional researches by revealing the trajectory of CP in the relationship through the longitudinal data. We also want to examine which variables in the relationship can facilitate changes of CP. Research has shown that CP is significantly changed with the development of the relationship when we analyzed it through latent growth modeling. This confirms that CP needs to be understood in the relationship. In addition, 'relationship proneness' variable and 'dependence to provider' variable have positive effects on the initial values of CP, but they have not been established to promote the changes of CP. Consequently, when considering the dynamics of relationships, it is important to recognize that CP is also dynamic. This study sought to get out of the cross-sectional and fragmented understanding of CP that is dynamic. Through this, we would like to propose the successful operation of the customer management program of service firms in relation to CP. This will lead to the success of service encounter where appropriate CP levels at each stage of relationship development can be achieved.

• Tribology and Lubricants
• /
• v.33 no.1
• /
• pp.1-8
• /
• 2017

Drag torque reduction in a wet clutch pack is a key aspect of the design process of the dual clutch transmission (DCT) system. In order to reduce the drag torque caused by lubricant shear resistance, recently developed wet clutch pack systems of DCT, as well as automatic transmission and other four-wheel drive (4WD) couplings, frequently utilize wavy wet clutch pads. Therefore, wavy shape of friction pad are made on the groove patterns like waffle pattern for the reduction of drag torque. Additionally, the groove patterns are designed with larger channels at several locations on the friction pad to facilitate faster outflow of lubricant. However, channel performance is a function of the waviness of the friction pad at the location of the particular channel. This is because the discharge sectional area varies according to the waviness amplitude at the location of the particular channel. The higher location of the additional channel on the friction pad results in a larger cross-sectional area, which allows for a larger flow discharge rate. This results in reduction of the drag torque caused by the shear resistance of DCTF, because of marginal volume fraction of fluid (VOF) in the space between the friction pad and separator. This study computes the VOF in the space between the friction pad and separator, the hydrodynamic pressure developed, and the shear resistance of friction torque, by using CFD software (FLUENT). In addition, the study investigates the dependence of these parameters on the location and waviness amplitude of the channel pattern on the friction pad. The paper presents design guidelines on the proper location of high waviness amplitude on wavy friction pads.

• The Korean Journal of Health Service Management
• /
• v.8 no.3
• /
• pp.169-179
• /
• 2014

The aim of this study was to understand the factors related to depression according to gender in vulnerable elderly. We conducted a cross-sectional study with 1,709 elderly beneficiaries of the visiting health care program in Seoul. Depression was measured using the Geriatric Depression Scale Short Form Korea Version(GDSSF-K) questionnaire. Depression score was mild level in vulnerable elderly. There was no gender difference in depression level. Factors related to depression differ by gender. In the elderly men, higher depression showed significant correlation with a lower level of health-related quality of life(HRQOL) and self-rated health(SRH). In addition, higher depression was observed for elderly men living alone than for those living with family. These factors explained depression by 23.1%. In the elderly women, higher depression showed significant correlation with a lower level of HRQOL, SRH and a higher dependence of instrumental activities of daily living. In addition, higher depression was observed for elderly women who has fall experience. These factors explained depression by 22.8%. Gender-specific nursing strategies may be required for prevention of depression in vulnerable elderly.