• Cross-Cultural Studies
• /
• v.21
• /
• pp.213-254
• /
• 2010

The goal of this thesis is to make a comparative study about the variant form of the Chinese character in the five sorts of old maps drawing outside of the main gates of old map including DeDongYei-jido. The main task of this thesis can be classified under three heads - (1) introducing the literature of comparative study in the five sorts of old maps including DeDongYei-jido (2) classification of variant form in the five sorts of old maps (3) characteristic of variant form in the five sorts of old maps. In this thesis, aspect of variant form is classified under six head - (1) variation of the whole shape of the character (2) taking place the variation in both sides of Chinese character (3) taking place the variation in part (4) taking place variation in the strokes of the Chinese character (5) misusing different characters (6) changing different characters. This thesis explains some characteristic of variant form - (1) simplification of the shape of characters (2) using the Hou-qi-zi(後起字, Chinese character which is actually the same but made the next) (3) replacing the overlapped both sides of Chinese character with omit mark (4) a wrongly written character (5) discovering the variant form such as variant form of 廣, 广 variant form of 廛, variant form of 院 which was not recorded in Chinese literature. From now on, there should be some collections of variant form of Korean style and study. we are going to have to standardize aspect of variation and rule of variant form in old maps until we have to make some ways to recognize the block letter.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.152-157
• /
• 2003

Natural frequencies of the transνerse vibration of beams with step change in cross-section are obtained by using the asymptotic closed form solution. This closed form solution is found by using WKB method under the assumption of slowly varying properties, such as mass, cross-section, tension etc., along the beam length. However, this solution is found to be still very accurate even in the case of large variation in cross-section and tension. Therefore, this result can be easily applied to many engineering problems.

• Physical Therapy Korea
• /
• v.21 no.1
• /
• pp.63-69
• /
• 2014

Cross knee curl-up is an ideal variation of abdominal curl up exercise to strengthen abdominal musculature without excessive lumbar flexion which can increase the loads on the disc and ligaments. In addition, slowly forced expiration can facilitate the activation of the abdominal musculature. The purpose of this study was to determine the effects of slowly forced expiration on activity of abdominal muscles, such as rectus abdominis (RA), external oblique (EO), and transverse abdominis/internal oblique (TrA/IO), while cross knee curl-up. Eleven young and healthy subjects (6 males and 5 females) participated. All subjects performed the cross knee curl-up slowly forced expiration and natural breathing. Paired t-test was performed in normalized electromyogram (EMG) muscle activity of the bilateral RA, EO, and TrA/IO to compare the differences between the cross curl-up with slowly forced expiration and natural breathing. Statistical significance was set at .05. There were no significant differences in normalized EMG muscle activity of the bilateral RA, EO, and TrA/IO between the cross curl-up with slowly forced expiration and natural breathing. The finding of this study designates that slowly forced expiration does not induce increasing activity of abdominal muscle in cross knee curl-up; hence, learning step of breathing control might not be necessary to strengthen abdominal muscle in cross knee curl-up.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.5
• /
• pp.126-133
• /
• 2017

This report investigates the stress distribution according to the location and shape change of the circular hole for the lightweight design of the cross beam of a railway passenger car and studies the lightweight design. To design a lightweight cross beam with a circular hole, we selected the non-circular crossbeam as a basic model, examined the stress distribution and displacement by position and determined the location, shape, size and quantity of the hole for light weight. We analyzed the effects of the position and shape of the hole on the maximum equivalent stress and displacement. The influencing factors were set as the design parameters, and the stress value was examined according to the variation of each variable. By considering the stress value according to the change of each variable and selecting the design parameter with the narrowest scattering value of the stress at each position of the hollow cross beam with various hole positions and shapes, we studied a cross beam with a circle hole under identical load condition to have an equal stress distribution to that of a non-circular cross beam.

• Journal of computational fluids engineering
• /
• v.19 no.1
• /
• pp.57-63
• /
• 2014

This study performed numerical analysis for the characteristics of flow-induced forces and the flow instability depending on the cross-sectional shape of the cylinder in laminar flow. To implement the cylinder cross-section, we adopted an Immersed Boundary Method with marker particles. We analyzed flow characteristics based on the radius of corner curvature. Main parameters are corner radius and Reynolds number (Re). With Re = 40, 50, 150 we calculated the flow field, drag coefficient, RMS of lift coefficient, pressure coefficient and Strouhal number in conjunction with the corner radius variation. Also, we calculated critical Reynolds number ($Re_c$) depending on the corner radius variation.

• Korean Journal of Optics and Photonics
• /
• v.8 no.1
• /
• pp.73-79
• /
• 1997

We analyzed the variation of the focus error signal with the effect of land and groove, wavefront error, and optical system parameter variation for the knife-edge and astigmatism methods on the Land/Groove recordable optical disc, using a numerical simulation method. We verified causes of the zero-cross-shift that took place by the effect of land and groove by analyzing the diffraction beam including defocus wavefront errors. We also found that the sensitivty of the focus error signal was reduced by the effect of land and groove in the astigmatism method, as in the analysis of the focus error signal with the each order of the diffraction beam.

• East Asian Economic Review
• /
• v.18 no.3
• /
• pp.253-276
• /
• 2014

We examine which traditional asset pricing variables together with bank-specific accounting variables explain the cross-sectional variation of future bank stock returns, using a firm-level data of eight Asian countries. Our empirical evidence shows that exchange rate risk, firm size, the book-to-market ratio, and the net income ratio are important in explaining future bank stock returns during normal times. However, during the Global Financial Crisis period, different variables such as local market beta, illiquidity risk, equity ratio, and off-balance sheets ratio were statistically significant. Thus, researchers and policy practitioners should monitor these variables during normal times as well as during times of crisis.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.8
• /
• pp.2628-2632
• /
• 2011

The nucleophilic substitution reactions of Y-O-aryl phenyl phosphonochloridothioates with substituted anilines ($XC_6H_4NH_2$) and deuterated anilines ($XC_6H_4ND_2$) are kinetically investigated in acetonitrile at $55.0^{\circ}C$. The deuterium kinetic isotope effects (DKIEs) invariably increase from an extremely large secondary inverse ($k_H/k_D$ = 0.439; min) to a primary normal ($k_H/k_D$ = 1.34; max) as both substituents of nucleophile (X) and substrate (Y) change from electron-donating to electron-withdrawing. These results are opposite to the DKIEs on Y-O-aryl methyl phosphonochloridothioates, and can be rationalized by the gradual transition state (TS) variation from backside to frontside attack. The trigonal bipyramidal pentacoordinate TS is proposed for a backside attack, while the hydrogen-bonded, four-center-type TS is proposed for a frontside attack. The negative values of the cross-interaction constants (${\rho}_{XY(H)}$ = -0.38 for $XC_6H_4NH_2$ and ${\rho}_{XY(D)}$ = -0.29 for $XC_6H_4ND_2$) indicate that the reactions proceed by a concerted $S_N2$ mechanism.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.843-846
• /
• 2004

Cavity tone is generated due to the feedback between flow and acoustic wave. It is recognized that the period is determined by the time required for the flow convection in one direction, the time required for the acoustic propagation in the other direction and the time for phase shift depending on the flows and mode. Most of the phenomena have been investigated by experiments and a simple but fundamental theory. But the cause of the phase shift and the correctness of the theory have not been clearly explained so far. In this paper, the phenomena are calculated numerically to obtain detail information of flow and acoustic wave to explain the mechanism including the phase. High order high resolution scheme of optimized high order compact is used to resolve the small acoustic quantities and large flow quantities at the same time. The data are reduced using cross correlation function in space and time and cross spectral density function which has phase information. Abrupt change in pressure near corner in cavity is observed and is relate to phase variation. The time required for the feedback between the flow and acoustic wave is calculated after the numerical simulation f3r various modes. The periods based on the time calculated using the above method and direct observation from the acoustic waves generated and propagated in the numerical simulation are compared. It is found that no phase shift is required if we examine the time required carefully. Rossiter's formula for the cavity tone used for quick estimation needs to be modified far some modes.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.6 no.4 s.23
• /
• pp.57-65
• /
• 2006

In this study, hydraulic model same as natural channel with junction area and curved reach is constructed, and after that the variation of difference of the water surface elevation at cross section in junction area is analyzed using constructed hydraulic model. In junction area, the variation of maximum water level based on downstream section is more affected in discharge ratio at upstream than downstream. The maximum water level increased as closed to junction and the peak level appeared at just downstream of junction. The slope of water elevation at cross section is affected in section shape and decreased as discharge ratio is reduce. The expressed formulas developed in the channel consist of constant curvature and section shape showed difference of 60% with measured value, but the suggested formula in this study to compute difference of water surface elevation showed difference of 10% with measured value.