• Journal of Periodontal and Implant Science
• /
• 제33권1호
• /
• pp.61-77
• /
• 2003

The major goals of periodontal therapy are the functional regeneration of periodontal supporting structures already destructed by periodontal disease as well as the reduction of signs and symptoms of progressive periodontal disease. There have been many efforts to develop materials and therapeutic methods to promote periodontal wound healing. Bone graft & guided tissue are being used for the regeneration of destroyed periodontium these days. Non-resorbable membranes were used for Guided tissue regeneration in early days, however more researches are focused on resorbable membranes these days. The aim of this study is to evaluate the osteogenesis of paradioxanone membrane on the calvarial critical size defect in Sprague Dawley rats. An 8 mm diameter surgical defect was produced with a trephine bur in the area of the midsagittal suture. The rats were divided into three groups: Untreated control group, Biomesh(R) group and paradioxanone group. The animals were sacrificed at 4, 8 and 12 weeks after surgical procedure. The specimens were examined by histologic, histomorphometric analyses. The results are as follows: 1. In histological view on Biomesh(R), no visible signs of resorption was observed at 4 weeks but progressive resorption was observed at 8 weeks through 12 weeks. Paradioxanone membrane expanded at 4 weeks, and rapid resorption was observed at 8 weeks. In both the membranes, inflammatory cells were observed around them. Inflammatory cells decreased with time but were still present at 12 weeks. More inflammatory cells were observed in paradioxanone membranes than in Biomesh(R) membrane. 2. The area of newly formed bone in the defects were 0.001${\pm}$0.001, 0.006${\pm}$0.005, 0.002${\pm}$0.003 at the 4 weeks, 0.021${\pm}$0.020, 0.133${\pm}$0.073, 0.118${\pm}$0.070 at the 8 weeks and 0.163${\pm}$0.067, 0.500${\pm}$0.197, 0.487${\pm}$0.214 at the 12 weeks in the control group, Biomesh(R) group and experimental group respectively. Compared to the control group, Biomesh(R) group displayed significant differences at 4,8, and 12 weeks and the paradioxanone group at 8 and 12 weeks.(P<0.05)

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제26권2호
• /
• pp.179-185
• /
• 2000

The purpose of this study was to develop an osteogenic, biodegradable material using polymer and BMP. It was designed to have structural function and be moldable, for the reconstruction of load bearing areas and deformities of various configurations. Bone apatite was added to Poly(L-lactide)(PLLA) and made porous for osteoconductability and ease of BMP loading. The materials, with or without BMP purified from porcine bone matrix, were evaluated in cranial bone defect models in rats for biocompatibility and bone regeneration capability. The following results were obtained: The PLLA-BMP material with BMP added to the polymer showed 30% healing of cranial bone defects in rats during the 2 weeks to 3 months period of observation. The moldable PLLA agent without BMP also showed 25% bone healing capacity. Although new bone formation was incomplete in the critical size defect of rat cranium, it can be concluded that the unique moldability of those agents makes them useful for the reconstruction of various bone defects and maxillofacial deformities.

• 전자공학회논문지SC
• /
• 제45권6호
• /
• pp.16-25
• /
• 2008

미세 탐침이란 프로브 카드(Probe Card)를 구성하는 초미세탐침을 의미한다. 이러한 미세 탐침은 그 크기가 상당히 미세하기 때문에 외관 이상 유무를 사람의 눈으로 검사하기가 상당히 어렵다. 반면, 프로브카드를 구성하는 미세 탐침의 이상 유무는 상당히 중요한 요소라고 볼 수 있다. 이에 본 연구에서는 사람의 눈으로 검사하기 어려운 미세 탐침의 불량 상태를 자동화된 비전 시스템으로 검사할 수 있는 방법을 개발하였다. 즉 탐침의 구부러진 각도, Tip Length, 종단 직경을 고속으로 자동 검사할 수 있는 비전 기술을 개발한 것이다 제안한 방법에 의한 실험결과, 사람의 육안에 위한 검사보다 검사의 정확도와 속도가 향상되었으며, 또한 조명환경에 대해서도 강건성(robustness)이 향상되었음을 알 수 있었다.

• Clinics in Shoulder and Elbow
• /
• 제12권2호
• /
• pp.255-263
• /
• 2009

목적: 견관절 전방 불안정성에서 관절와 및 상완골 두의 골 결손은 재탈구와 밀접히 연관되어 있다. 의미있는 골 결손이 동반된 전방 불안정성에서 적용될 수 있는 개방적 술식을 고찰하고 저자들의 경험을 소개하고자 한다. 대상 및 방법: 전방 불안정성에서 골 결손에 대해 연구하고 발표된 논문을 조사하여 시술되고 있는 개방적 술식들 요약하고 정리하였다. 결과: 전방 관절낭 관절와 순을 복원한 후 재탈구를 예방하기 위해 수술 전에 방사선학적으로 골결손을 정확히 평가하는 것은 중요하다. 관절와 결손을 복원하기 위해 오구돌기 이전술(Bristow 술식 또는 Latarjet 술식)이나 자가 장골 이식을 사용할 수 있고, 상완골 두의 후상방골 결손 (Hill-Sachs병변)에 대해서는 회전 절골술이나 동종골 이식 등이 사용될 수 있다. 골 결손에 대한 인공 관절 치환술은 시도되고 있으나 아직 제한적이며 더 많은 연구가 필요하다. 결론: 개방적 술식을 통해 골 결손을 복원해야 재탈구의 위험을 낮출 수 있다. 관절경술을 통한 골 병변의 치료가 시도되고 있으나 아직도 장기간의 노력과 연구가 필요하다.

• Archives of Plastic Surgery
• /
• 제35권6호
• /
• pp.631-636
• /
• 2008

Purpose: Adipose tissue-derived stem cells(ADSC) has an osteoconductive potential and demineralized bone matrix(DBM) is an osteoinductive material. A combination of DBM and ADSC wound probably create osteoinductive properties. The purpose of this study is to determine the effect of the combination of DBM and ADSC mixture on healing of rat calvarial defect. Methods: Thirty adult male Sprague-Dawley rats were randomized into 3 groups(n=10) as 1) Control, 2) DBM alone, 3) DBM with ADSC mixture. DBM with ADSC mixture group has had a 3-day preculture of ADSC from groin fat pad. An 6 mm critical size circular calvarial defect was made in each rat. Defect was implanted with DBM alone or DBM with ADSC mixture. Control defect was left unfilled. 6 and 12 weeks after the implantation, the rats were sacrificed and the defects were evaluated by histomorphometric and radiographical studies. Results: Histomorphometric analysis revealed that DBM with ADSC mixture group showed significantly higher bone formation than DBM alone group(p<0.05). Although radiographs from DBM alone group and DBM with ADSC group revealed similar diffuse radiopaque spots dispersed throughout the defect. Densitometric analysis of calvarial defect revealed DBM with ADSC mixture group significantly higher bone formation than DBM alone(p<0.05). There was correlation of densitometry with new bone formation(Spearman's correlation of coefficient=0.804, 6 weeks, 0.802, 12 weeks). Conclusion: The DBM with ADSC mixture group showed the best healing response and the osteoinductive properties of DBM were accelerated with ADSC mixture. It will be clinically applicable that DBM and ADSC mixture in plastic and reconstructive surgery, such as alveolar cleft and congenital facial deformities that bone graft should be required.

• Journal of Periodontal and Implant Science
• /
• 제32권4호
• /
• pp.753-767
• /
• 2002

The purpose of this study was to evaluate histologically the effect of LiF-maleic acid added calcium aluminate(LM-CA) bone cement & CA-PMMA composite bone cement on the healing of calvarial defect in Sprague-Dawley rats. The critical size defects were surgically produced in the calvarial bone using the 8mm trephine bur. The rats were divided in three groups : In the control group, nothing was applied into the defect of each rat. LM-CA bone cement was implanted in the experimental group 1 and CA-PMMA composite bone cement was implanted in the experimental group 2. Rats were sacrificed at 2, 8 weeks after surgical procedure. The specimens were examined by histologic analysis, especially about the bone-cement interface and the response of surrounding tissue. The results are as follows; 1. In the control group, inflammatory infiltration was observed at 2 weeks. At 8 weeks, periosteum and duramater were continuously joined together in the defect area. But the center of defect area was filled up with the loose connective tissue. 2. In the experimental group 1, the bonding between implanted bone cement and the existing bone was seen, which more increased in 8 weeks than 2 weeks. Inflammatory infiltration and the dispersion of implanted bone cement particles were seen in both 2 weeks and 8 weeks. 3. In the experimental group 2, implanted bone itself had a dimensional stability and no bonding between implanted bone cement and the existing bone was seen in both 2 weeks and 8 weeks. Implanted bone cement was encapsulated by fibrous connective tissue. In addition, inflammatory infiltration was seen around implanted bone cement. On the basis of these results, when LM-CA bone cement or CA-PMMA composite bone cement was implanted in rat calvarial defect, LM-CA bone cement can be used as a bioactive bone graft material due to ability of bonding to the existing bone and CA-PMMA can be used as a graft material for augmentation of bone-volume due to dimensional stability.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제21권4호
• /
• pp.325-331
• /
• 1999

We tested the bone regenerating capacity and histologic response of bioresorbable matrix-type implant, which was made with Poly(lactide-co-glycolide)(PLGA) and bone apatite for the carrier of bone morphogenetic protein(BMP). The critical size defect of 8mm in diameter was created at the calvaria of SD rats(n=18), and repaired with polymer implant with $15{\mu}g$ of rhBMP-2(n=9) or without it(n=9). At 2 weeks, 1 months after implantation, the animals were sacrificed(3 animals at every interval and group) and histologically evaluated. The calvarial defect which was repaired with polymer with BMP healed with newly formed bone about 70% of total defect. But that without BMP showed only 0 to under 30% bony healing. Inflammatory response was absent in both group through the experimental period, but there's marked foreign body giant response though it was a little less significant in polymer with BMP group. As the polymer was resorbed, the space was infiltrated and replaced by fibrovascular tissue, not by bone. In conclusion, our formulation of bioresorbable matrix implant loaded with bone morphogenetic protein works good as a bone regenerating material. However, it is mandatory to devise our system to have better osteoinductive and osteoconductive property, and less multinucleated giant cell response.

• 대한치주과학회:학술대회논문집
• /
• 대한치주과학회 2005년도 제45회 종합학술대회 연제초록
• /
• pp.172-173
• /
• 2005

• Journal of Mechanical Science and Technology
• /
• 제14권10호
• /
• pp.1021-1027
• /
• 2000

In this study, fatigue tests were performed to examine the effects of micro drill hole on fatigue limit of as cast and austempered ductile cast iron (ADI) using the rotary bending fatigue tester. As results, micro drill holes ($diameter{\leq}0.4mm$) did not influence the fatigue limit of ADI, compared to annealed ductile cast iron; the critical defect size of crack initiation, in ADI was larger than as cast. If the ${\sqrt{area}}$ of micro drill hole and graphite nodule in ADI are comparable, crack initiates at the graphite nodule. When the ruggedness developes through austempering treatment process, microstructure on crack initiation at micro drill hole is tougher than that of as cast ductile cast iron.

• Journal of Medicine and Life Science
• /
• 제15권2호
• /
• pp.105-107
• /
• 2018

The reconstruction method of nasal area can be used differently depending on the location, size, age. In this elderly female patient case, without using the forehead medial flap, good results can be obtained by using an advancement flap considering the nasal aesthetic unit.