• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.7
• /
• pp.3474-3481
• /
• 2013

In this work, a new high frequency transmission line structure combined with defected ground structure (DGS) and artificial dielectric substrate (ADS) structure is proposed. DGS patterns give add the additional inductance to transmission lines and results in the increased characteristic impedance for a given line width. To the contrary, ADS presents increased capacitance and reduced line impedance. So both play a role in reducing the length of transmission lines commonly, but in preserving the line impedance complementarily. This means that the length of transmission lines can be reduced furtherly by DGS and ADS without a critical change of line width compared to the cases when one of DGS and ADS is used only. As examples, $35{\sim}100{\Omega}$ transmission lines having DGS and ADS are designed, fabricated, measured, and compared to the simulation results. A good agreement between the simulated and measured line impedances is presented. In addition, the physical lengths of the proposed transmission lines are only 55.4~76.9% of those of the normal microstrip lines for the same electrical lengths.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.1
• /
• pp.173-182
• /
• 2006

In the design of curved girder bridges, the engineer is faced with a complex stress situatiorl. since these types of mutiple-I girder. mono-box girder and twin-box girder are subjected to both bending and torsional force. In general, the torsional forces consist of two part, St. venant's and warping. Thus the procedure for determining the induced stresses in a curved girder is difficult. The transfer matrix method is extensively used for the structural analysis because its merit in the theoretical background and applicability. The technique is attractive for implementation on a numerical solution by means of a computer program coded in Fortran language with a few elements. To demonstrate this fact. it gives good results which compare well with finite difference method. Therefore, in this paper, to clarify the range where the torsional warping stress can be approximated by pure torsional analyzed a critical value of relationships between the torsional stress ratio and torsional ratio.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.1
• /
• pp.251-259
• /
• 2013

This paper is aimed to introduce to a moving bollard (i.e., smart bollard) to improve the pedestrian safety along the crosswalk in the school zone as a means to physically separate pedestrians and approaching vehicles, to propose the appropriate criteria for its installation and implementation from the traffic engineering perspective, and to evaluate its effectiveness with the microscopic simulation model. The simulation results indicate that implementing the smart bollard results in the decrease of average approaching speed and traffic throughput and the most critical factors affecting its effectiveness are yellow time of the traffic signal directly associated with the location of the advance warning sign and its operation time, 5~6 seconds and 2~3 seconds, respectively.

• Journal of the Korean Chemical Society
• /
• v.55 no.3
• /
• pp.335-340
• /
• 2011

The solution properties of sodium n-dodecyl sulfate, as an anionic surfactant in the presence of a cationic watersoluble 5, 10, 15, 20-tetrakis (N-methylpyridinium-4-yl) porphyrin (TMPyP) has been comprehensively studied by means of conductometry, UV-vis and resonance light scattering (RLS) spectroscopies. The results represent the decreasing of critical micelle concentration of SDS solution due to increasing of TMPyP concentration. The stabilization of SDS micelle is due to neutralization of negative charge at the micelle surface. The presence of three different species of TMPyP in SDS solution has been unequivocally demonstrated: free porphyrin monomers, porphyrin monomers or aggregates bound to the micelles, and nonmicellar porphyrin/surfactant aggregates. Our results show SDS induced an aggregation in TMPyP. In fact two kinds of J-aggregations were observed: one of them for porphyrin monomers or aggregates bound to the micelles and the other for nonmicellar porphyrin/surfactant aggregates. However, the results represent the electrostatic interaction of TMPyP with SDS anion below the cmc.

• Journal of the Korean Chemical Society
• /
• v.52 no.2
• /
• pp.111-117
• /
• 2008

critical micelle concentration (CMC) and the counter ion binding constant (B) in a mixed micellar state of the trimethyltetradecylammonium bromide (TTAB) with the polyoxyethylene (23) lauryl ether (Brij 35) at 25oC in water and in aqueous solutions of butanol isomers were determined as a function of 1 (the overall mole fraction of TTAB) by the use of electric conductivity method and surface tensiometer method. Various thermodynamic parameters (Xi, i, Ci, aiM, and Hmix) were calculated by means of the equations derived from the nonideal mixed micellar model. The results say that the effects of butanol isomers on the micellization of TTAB/Brij 35 mixtures have been in the order of n-butanol>iso-butanol>t-butanol> water.

• Journal of architectural history
• /
• v.12 no.3
• /
• pp.149-162
• /
• 2003

Schulz accepted the existentialist view based on Heidegger's thought and at the same time the objectivist view making fixed this living world, evoking controversies for discussion. He could not see various presentations of the meaning of place because he perceived elements of this world individually. Thus Schulz's mixed system of understanding is sternly different from Heidegger's thought. First, Heidegger suggests that place as existential space represents the occasion revelation of incidents in Dasein. While Schulz recognizes that place is a systematic space predetermined for Dasein. Second, Heidegger interprets the placeness as creative openness in which elements comprising this world face and interact with each other into one. In contrast, Schulz defines each of the elements through signification and regards it as invariable and static. Third, Heidegger perceives that the placeness is expressed with sustainable, complex images through "rift-design" which seeks dynamic interactions between the ground and the world. While Schulz attempts to take "Genius Loci" or "habituated scene" through "gathering" as a concept he regards static and then visualize such structural two factors, producing certain internal images of place. However, limits of Schulz's theory prevent us from exerting complete imagination and discovering the inner creative world of the object. Thus the ultimate goal of paying attention to the placeness, that is, the recovery of individual identity, fails due to the prevalence and abstraction of objectified thinking. In contrast, Heidegger's thought about "openness" is a useful means of realizing the placeness. Openness may be referred to a dynamic coordination in which the earth and the world sustain each other under incessant mutual tensions, but not sticking o each other. "Rift-design" is an openness strategy to cause tense relations by preventing structuralization intentively. This is a creative design that allows seeing original seams of the object.

• Journal of architectural history
• /
• v.18 no.6
• /
• pp.7-22
• /
• 2009

This writing is to understand some trends and its meaning of Regionalism Architecture in Jeju Island since 1950's. This thesis began with an interest in the identity crisis implicit in the simultaneous striving for modernism and the so-called regional values in Jeju Island. Regionalism is a response in architectural terms to re-establish continuity in a given place between past and present forms, and also a unique result related to particular places, cultures and climates in region. This is one way of looking at the issues of regional identity. The study began by observing the general characteristics of contemporary ideas on Regionalism in Jeju architecture. This means that tracing the history of development of Regionalism architecture in research area is not the focus of this thesis. The thesis demonstrates that Regionalism architectures in Jeju shows some trends related to the local cultural elements (or ideas) such like traditional architectural forms, natural environment, local construction-materials, etc. In summation, in the perspective of Regionalism architecture,mostofbuildingsin Jeju bring out them only as vernacular architecture as it was once produced, by the simple combination and imitation without any creative interaction of the regional culture. I stress the point in this paper that, in over the last fifty years, there have been very narrowed attempts to design the regional values in the main, and also point out that there are problems in the manner in which local architects have gone about trying to define the regional themes. So, a grate depth is required to understand the phenomenon that Jeju area is with its various nuances of traditions, art, culture, climate and light and then to reinterpret it into the modern building type with all the high sense. In addition to that, some conclusions are reached on future directions and the significance of the study.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.3
• /
• pp.83-89
• /
• 2016

The group formation problem of the machine and part is a critical issue in the planning stage of cellular manufacturing systems. The machine-part grouping with alternative process plans means to form machine-part groupings in which a part may be processed not only by a specific process but by many alternative processes. For this problem, this study presents an algorithm based on self organizing neural networks, so called SOM (Self Organizing feature Map). The SOM, a special type of neural networks is an intelligent tool for grouping machines and parts in group formation problem of the machine and part. SOM can learn from complex, multi-dimensional data and transform them into visually decipherable clusters. In the proposed algorithm, output layer in SOM network had been set as one-dimensional structure and the number of output node has been set sufficiently large in order to spread out the input vectors in the order of similarity. In the first stage of the proposed algorithm, SOM has been applied twice to form an initial machine-process group. In the second stage, grouping efficacy is considered to transform the initial machine-process group into a final machine-process group and a final machine-part group. The proposed algorithm was tested on well-known machine-part grouping problems with alternative process plans. The results of this computational study demonstrate the superiority of the proposed algorithm. The proposed algorithm can be easily applied to the group formation problem compared to other meta-heuristic based algorithms. In addition, it can be used to solve large-scale group formation problems.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.6
• /
• pp.535-544
• /
• 2017

This paper analyzes the relations between design errors, prevented by building information modeling (BIM)-based design validation, and their impacts in order to identify critical consideration factors for implementing BIM-based design validation in architecture, engineering, and construction (AEC) projects. More than 800 design errors detected by BIM-based design validation in two BIM-based projects in South Korea are categorized according to their causes (illogical error, discrepancy, and missing item) and work types (structure, architecture, and mechanical, electrical, and plumbing (MEP)). The probabilistic relations among the independent variables, including the causes and work types of design errors, and the dependent variables, including the project delays, cost overruns, low quality, and rework generation that can be caused by these errors, are analyzed using logistic regression. The characteristics of each design error are analyzed by means of face-to-face interviews with practitioners. According to the results, the impacts of design error causes in predicting the probability values of project delays, cost overruns, low quality, and rework generation were statistically meaningful.

• Earthquakes and Structures
• /
• v.12 no.3
• /
• pp.349-357
• /
• 2017

The design of reinforced concrete structures strongly depends on the value of the compression concrete strength used for the structural components. Given the uncertainties involved on the materials quality provided by concrete manufacturers, in the construction stage, these components may be either over or under-reinforced respect to the nominal condition. If the structure is under reinforced, and the deficit on safety level is not as large to require the structure demolition, someone should assume the consequences, and pay for the under standard condition by means of a penalty. If the structure is over reinforced, and other failure modes are not induced, the builder may receive a bonus, as a consequence of the higher, although unrequested, building resistance. The change on the building safety level is even more critical when the structure is under a seismic environment. In this research, a reliability-based criteria, including the consideration of expected losses, is proposed for bonification/penalization, when there are moderated differences between the supplied and specified reinforced concrete strength for the buildings. The formulation is applied to two hypothetical, with regular structural type, 3 and 10 levels reinforced concrete buildings, located on the soft soil zone of Mexico City. They were designed under the current Mexican code regulations, and their responses for typical spectral pseudoaccelerations, combined with their respective occurrence probabilities, are used to calculate the building failure probability. The results are aimed at providing objective basis to start a negotiation towards a satisfactory agreement between the involved parts. The main contribution resides on the explicit consideration of potential losses, including the building and contents losses and the business interruption due to the reconstruction period.