• 한국자동차공학회논문집
• /
• 제10권1호
• /
• pp.187-194
• /
• 2002

It has been reported that cracks in mechanical joints is generally under mixed-mode and there is critical inclined angle at which mode I stress intensity factor becomes maximum. The crack propagates in arbitrary direction and thus the prediction of crack growth path is needed to provide against crack propagation or examine safety. In order to evaluate the fatigue life of cracks in mechanical joints, horizontal crack normal to the applied load and located on minimum cross section is major concern but critical inclined crack must also be considered. In this paper mixed-mode fatigue crack growth test is performed far horizontal crack and critical inclined crack in mechanical joints. Fatigue crack growth path is predicted by maximum tangential stress criterion using stress intensity factor obtained from weight function method, and fatigue crack growth rates of horizontal and inclined crack are compared.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.161-162
• /
• 2009

• 한국안전학회지
• /
• 제37권2호
• /
• pp.76-87
• /
• 2022

Lithium-ion batteries (LIBs) have attracted much interest for their high energy density (>150 mAh/g), high capacity, low self-discharge rate, and high coulombic efficiency. However, with the successful commercialization of LIBs, fire and explosion incidents are likely to increase. The thermal runaway is known as the major factor in battery-related accidents that can lead to a series of critical conditions. Considering this, recent studies have shown an increased interest in countering the safety issues associated with LIBs. Although safety standards for LIB use have recently been formulated, little attention has been paid to the safety around the manufacturing process for battery products. The present study introduces a risk assessment method suitable for assessing the safety of the LIB-manufacturing process. In the assessment method, a compensation parameter (Z-factor) is employed to correctly evaluate the process's safety on the basis of the type of material (e.g., metal anode, liquid electrolyte, solid-state electrolytes) utilized in a cell. The proposed method has been applied to an 18650 cell-manufacturing process, and three sub-processes have been identified as possibly vulnerable parts (risk index: >4). This study offers some crucial insights into the establishment of safety standards for battery-manufacturing processes.

• 품질경영학회지
• /
• 제30권4호
• /
• pp.26-43
• /
• 2002

This study was conducted to identify the differences in service quality between Incheon and Kimpo international airports and critical factors influencing satisfaction of their customers. According to the results of the study, all service quality factors of Incheon international airport except the service factor of geographical location were better than those of Kimpo international airport. However, all service quality factors of the two airports were evaluated inferior to those of American, western European and Japanese international airports. In addition the service quality factors such as response, safety, airport facility and geographical location were found as critical factors influencing satisfaction of the airport customers. The service quality factor of geographical location of Incheon international airport was measured much inferior comparing with other service quality factors. Thus, the results of this study suggest that the Korean government deliberate and benchmark the international airports of western Europe and the USA in determining the geographical location when planning new international airports.

• 지질공학
• /
• 제25권2호
• /
• pp.299-304
• /
• 2015

강우침투로 인한 불포화토 사면의 안정해석이 산사태 분석 및 사면 안정성을 평가하는데 주요 문제로 부각되고 있다. 본 연구에서는 강우강도를 고려하여 국내 산사태 발생부의 모암별 풍화토층의 붕괴 임계심도를 파악하고자 하였다. 분석 결과 강우강도 및 사면경사 증가에 따라 편마암 풍화토는 임계심도가 3.00 m에서 3.77 m로 증가하였고, 화강암 풍화토는 임계심도가 1.75 m에서 2.40 m로 증가하였으며, 이암 풍화토는 3.00 m에서 4.15 m로 증가하였다. 점착력이 낮고 내부 마찰각이 높은 화강암 풍화토에서 붕괴 임계심도가 낮은 경향을 보였으며 강우강도에 의한 안전율 감소보다 사면경사 증가에 따른 안전율 감소가 다소 크게 발생하는 것으로 나타났다.

• 한국터널지하공간학회 논문집
• /
• 제23권6호
• /
• pp.577-587
• /
• 2021

격자형 지하공간 공법은 원지반의 강도를 최대한 활용하는 지하공간 굴착 공법이다. 격자형 지하공간의 안전성을 확보하기 위해서는 암주에 대한 안전성뿐만 아니라 실제 사용되는 공간(Room)에 대한 안전성 또한 확보되어야 하므로 암주와 동시에 공간(Room)에 대한 안정성이 평가되어야 하나, 이에 대한 연구는 미흡한 실정이다. 본 연구에서는 수치해석을 통해 격자형 지하공간의 룸(Room)과 암주 안전성에 대한 평가방안을 연구하였다. 지반조건, 암주 폭, 룸 폭을 매개변수로 한 총 125가지 경우의 수치해석을 수행하여 암주의 안전율은 지반의 강도가 증가할 경우 안전율이 증가하는 것을 확인하였고, 암주의 폭이 넓어질 경우는 안전율 증가 폭이 감소하는 것을 확인하였다. 룸 변형률은 한계변형률을 적용하여 평가하였으며, 암주의 폭이 좁아질수록 높게 나타나고, 룸의 폭이 좁아질수록 변형률이 작게 발생하였다. 암주 안전율과 룸 변형률에 대한 상관관계 분석 결과 암주 폭에 따라 암주의 기준 안전율 이상을 확보할 수 있는 룸 변형률의 상한값을 도출 할 수 있었다. 본 연구에서 도출된 결과는 지반조건, 룸 폭 등을 고려하여 실제 설계를 수행할 경우 룸의 안전성을 확보 할 수 있는 가이드라인으로 활용 될 수 있을 것으로 판단된다.

• Nuclear Engineering and Technology
• /
• 제50권7호
• /
• pp.1138-1147
• /
• 2018

Delayed hydride cracking (DHC) is an important failure mechanism for Zircaloy tubes in the demanding environment of nuclear reactors. The threshold stress intensity factor, $K_{IH}$, and critical hydride length, $l_C$, are important parameters to evaluate DHC. Theoretical models of them are developed for Zircaloy tubes undergoing non-homogenous temperature loading, with new stress distributions ahead of the crack tip and thermal stresses involved. A new stress distribution in the plastic zone ahead of the crack tip is proposed according to the fracture mechanics theory of second-order estimate of plastic zone size. The developed models with fewer fitting parameters are validated with the experimental results for $K_{IH}$ and $l_C$. The research results for radial cracking cases indicate that a better agreement for $K_{IH}$ can be achieved; the negative axial thermal stresses can lessen $K_{IH}$ and enlarge the critical hydride length, so its effect should be considered in the safety evaluation and constraint design for fuel rods; the critical hydride length $l_C$ changes slightly in a certain range of stress intensity factors, which interprets the phenomenon that the DHC velocity varies slowly in the steady crack growth stage. Besides, the sensitivity analysis of model parameters demonstrates that an increase in yield strength of zircaloy will result in a decrease in the critical hydride length $l_C$, and $K_{IH}$ will firstly decrease and then have a trend to increase with the yield strength of Zircaloy; higher fracture strength of hydrided zircaloy will lead to very high values of threshold stress intensity factor and critical hydride length at higher temperatures, which might be the main mechanism of crack arrest for some Zircaloy materials.

• 한국농공학회지
• /
• 제31권1호
• /
• pp.58-70
• /
• 1989

The paper compared the Bishop methed to the Fellenius method in the analysis of slope stability. Laboratory model test was carried out in the case of seepage flow considered. The results obtained from this study were summarized as follows; 1. The slice pieces of 10 were enough to analysis the slope stability. 2. The safety factor. by the Fellenius method was lower than the Bishop method by the 96 to 97% in the case of no seepage flow and by the 95 to 96% in the case of seepage flow considered. 3. Besides the parameter of soil and slope, the safety factor of slope was influenced by the height of slope. This phenomena was distinct in the height of height less than 10 meters. 4. In the case of clay, there was no difference in the safety factor of slope between Fellenius and Bishop rnethod. The safety factors of slope with the seepage flow considered were lower than those with no see-page flow. 5. The influence of cohesion on the safety factor was more significant in the Bishop method than in the Fellenius method. 6. The slope failure of model test of A and B soil samples with high permeability coefficient was taken place slightly in vicinity of toe by the concentration of stress and gradually increased 7. Under condition of same slope height, the shapper the slope, the shorter the radius and the center of critical circle appered downward and finally failure of slope occured inside the slope.

• 대한기계학회논문집A
• /
• 제35권3호
• /
• pp.281-287
• /
• 2011

얇은 관 탄성좌굴 공식의 불확실성을 고려하기 위해, 공식을 구성하는 파라미터인 튜브재료의 탄성계수, 푸아송 비, 튜브 두께 및 지름의 불확실성을 분석하였다. 본 연구는 원자로에서 연소되는 핵연료봉과 같이 사용 중 함몰을 엄격히 방지하고 있는 얇은 관의 설계신뢰도를 향상시키는 데에 중요하다. 분석 방법은 각각의 파라미터가 변화할 수 있는 범위를 충분히 포함할 수 있는 최소의 탄성좌굴 안전율을 구하고 이를 선형적으로 합하여 최종의 최소안전율을 구하였다. 최소 안전율에 가장 큰 영향을 미치는 파라미터는 관의 두께로 나타났다. 두께가 얇을수록 더 큰 최소안전율이 필요하며 예로 적용한 지르코늄 합금관의 경우, 두께가 0.254 와 0.87 mm 일 때 최소안전율은 각각 1.547 과 3.487 로 나타났다.

• 대한토목학회논문집
• /
• 제13권4호
• /
• pp.209-215
• /
• 1993

본(本) 연구(硏究)에서는 기존(旣存)의 절편법의 단점(短點)을 보완(補完)하기 위하여 Gussmann의 일반절편법을 안전율(安全率)로 정의하고, 또한 예상파괴면(豫想破壞面)을 구하기 위하여 Box가 제안(提案)한 Constrained simplex method를 최적화기법(最適化技法)으로 이용함으로써 안전율(安全率)과 한계파괴면(限界破壞面)을 동시에 구할 수 있는 사면안정해석(斜面安定解析) 프로그램 CSLOP을 개발(開發)하였다. 무한사면(無限斜面)과 일반사면(一般斜面)을 대상(對象)으로 사면해석을 한 결과 CSLOP에서 구한 안전율(安全率)은 Bishop의 간편해(簡便解)와 별 차이가 없었으며, 한계 파괴면을 찾는데 있어서 좋은 수렴(收斂)결과를 보였다.