• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.6
• /
• pp.162-172
• /
• 2009

Improvement of roadway environments to accommodate elderly drivers' declining driving capabilities are required. Currently, even the types of roadway designs vulnerable to elderly drivers have not been revealed in Korea. Thus, this study aims to analyze the types and vulnerabilities of the roadway designs that elderly drivers experience more accidents based on crash data of the Korean National Police Agency. This study has also reviewed foreign guidelines enhancing their safety on different roadway designs. Compared with normal drivers, elderly drivers tend to be more frequently involved in traffic accidents on intersections and vehicle-to-vehicle accidents on curved roadway segments. Assuming freeway interchanges are also risky sections, this study has also examined several methods to reduce elderly driver-related accidents on freeway ramp areas.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.5
• /
• pp.379-384
• /
• 2014

This article describes the dynamic behaviors of a rubber tired gantry crane(RTGC) under typical load conditions which are used in the design of gantry cranes. In order to investigate the dynamic characteristics of an RTGC, we developed a finite element crane model for its huge structure. The finite element model was validated with the modal test results, e.g., natural frequencies and normal modes. And other components of RTGC were converted into detailed 3D CAD models and finally transformed to rigid body models in a dynamic simulation program ADAMS. The load conditions considered in this paper were a normal operating condition(OP1) and container hanging condition with no external loads. As a result, we could find there was large influence of crane's vibration owing to its structural stiffness and deformation. And the vibration of crane could made the movements of RTGC, which occurs crash or malfunction of crane works.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.4
• /
• pp.41-52
• /
• 2008

Ubiquitous service environment is poor in reliability of connection and has a high probability that the intrusion and the system failure may occur. Therefore, in the environment, the capability of a system to collectively accomplish its mission in spite of active intrusions and various failure scenarios, that is, the survivability of services are needed. In this paper, we analyze the Jgroup/ARM framework that was developed in order to help the development of fault- tolerant Jini services. More importantly, we propose an intrusion-tolerant Jini service architecture to satisfy the security availability and quality of services on the basis of the analysis. The proposed architecture is able to protect a Jini system not only from faults such as network partitioning or server crash, but also from attacks exploiting flaws. It is designed to provides performance enough to show a low response latency so as to support seamless service usage. Through the experiment on a test-bed, we have confirmed that the architecture is able to provide high security and availability at the level that degraded services quality is ignorable.

• Journal of Auto-vehicle Safety Association
• /
• v.10 no.1
• /
• pp.20-26
• /
• 2018

The fatality of rollover accidents in motor vehicle crashes is high despite their low incidence. Through the investigation of a 12-passenger van rollover accident in which 10 passengers were involved, we intend to analyze the correlation between the severity of the injury and the position of the occupants. We collected accident information from medical records, interviews, photo-images of the damaged van, field surveys, and the results of the Korean New Car Assessment Program (KNCAP). Based on the occupants' position, we classified injury sites and estimated injury severity. Passenger injury severity was evaluated by trauma score calculation. The initiation type of the rollover accident was passenger side 'fall-over' and the Collision Deformation Classification (CDC) code for the damaged van was 00TDZO3. The crash of the van involved 10 passengers, with an average age of $16.3{\pm}4.2years$. Few of the occupants had fastened seat belts at the time of the incident, and there was no airbag installed. One patient sustained severe liver injury and another was diagnosed with a fracture of the right humerus. The most common injuries were at the upper extremities and the neck. The average of Injury Severity Score (ISS) was $4.8{\pm}5.9$, and the average ISS of right-seated, mid-seated and left-seated occupants was $7.5{\pm}9.3$, $1.5{\pm}0.7$, and $3.3{\pm}2.1$ respectively (p>0.05). In the rollover (to-passenger side) accident of occupant unfastened, the average ISS of right-seated occupants (near side) was higher, but there was no statistically significant difference.

• Korean Journal of Social Welfare
• /
• v.39
• /
• pp.210-237
• /
• 1999

The primary purpose of this study is to empirically examine the determinants of reemployment of the unemployed after the crash of Korea's economy in 1997. This study also investigates the effects of the government unemployment programs on reemployment of the program beneficiaries. Using the data from the 1998 Survey on Unemployment Condition and Welfare Needs, co-directed by the Korea Institute of Health and Welfare and the Korea Institute of Labor Policy, a Cox regression analysis was conducted. The study results suggested that, in general, the government unemployment programs did not have noticeable effects on reemployment of the beneficiaries. The study, however, found that the effect of the government programs varied, depending on the mode of unemployment-exit, that is, full-time versus part-time reemployment. In addition, the effects of such factors on reemployment as socio-economic characteristics of the unemployed, characteristics of households with unemployed family members, and previous job characteristics are also examined. Based on the study findings, some policy implications are discussed, and suggestions are made for improving the current unemployment programs.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.2
• /
• pp.265-274
• /
• 2015

The structural safety of nuclear power plant against impact from aircraft crash has been performed so far in two viewpoints such as local behavior and global behavior, and the local behavior has been evaluated using local damage evaluation formulas suggested based on the results of experimental data of RC (Reinforcement Concrete) wall. However, few data have been collected from recent research to evaluate the local behavior and damage of SC (Steel plate reinforced Concrete) wall, which is recently applied to the newly designed nuclear power plant. In this study, local damages of SC wall and RC wall against an idealized aircraft engine projectile impact are evaluated through FE simulation analyses with various wall thicknesses and steel ratio. Through analysis of local collision simulation results of SC and RC wall, the penetration depth of SC wall and RC wall are compared.

• International Journal of Highway Engineering
• /
• v.19 no.6
• /
• pp.13-21
• /
• 2017

PURPOSES : In this research, an SB3-level roadside barrier for a highway transition zone that meets the newly established guide Installation and Management Guide for Roadside Safety Appurtenance is developed. Its performance is evaluated by a numerical simulation and real-scale vehicle impact test. METHODS : The commercial explicit dynamic software LS-DYNA is utilized for impact simulation. An FE model of a passenger vehicle developed and released by the National Crash Analysis Center (NCAC) at George Washington University and a heavy goods vehicle (HGV) model developed by the TC226/CM-E Work Group are utilized for impact simulation. The original vehicle models were modified to reflect the conditions of test vehicles. The impact positions of the passenger vehicle and truck to the transition guardrail were set as 1/2 and 3/4 of the transition region, respectively, according to the guide. RESULTS : Based on the numerical simulation results of the existing transition barrier, a new structural system with improved performance was suggested. According to the result of a numerical simulation of the suggested structural system, two sets of transition barriers were manufactured and installed for real-scale vehicle impact tests. The tests were performed at a test field for roadside safety hardware of the Korea Highway Corporation Research Institute. CONCLUSIONS : The results of both the real-vehicle impact tests and numerical simulations of the developed transition barrier satisfied the performance criteria, and the results of numerical simulation showed good correlation with the test results.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.660-665
• /
• 2006

This paper presents a finite element method to analyze the free and forced vibration of a hard disk drive (HDD) considering the flexibility of a spinning disk-spindle with fluid dynamic bearings (FDBs), an actuator with pivot bearings, an air bearing between head-disk interface and the base with complicated geometry. Finite element equation of each component is consistently derived with the satisfaction of the geometric compatibility of the internal boundary between each component. The spinning disk, hub and FDBs are modeled by annular sector elements, beam elements and stiffness and damping elements, respectively. The actuator am, E-block, suspension and base plate are modeled by tetrahedral elements. The pivot bearing in the actuator and the air bearing between head-disk interfaces are modeled by the stiffness element with five degrees of freedom and the axial stiffness, respectively. A global matrix equation obtained by assembling the finite element equations of each substructure is transformed to a state-space matrix-vector equation, and both damped natural frequencies and modal damping ratios are calculated by solving the associated eigenvalue problem with the restarted Arnoldi iteration method. Modal and shock testing are performed to show that the proposed method well predicts the vibration characteristics of a HDD.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.2
• /
• pp.98-102
• /
• 2012

Increasing the fuel economy has been an inevitable issue for the development of new cars, and one of the important measures to improve the fuel economy is to decrease the vehicle weight. In order to obtain this goal, the researches about lighter, stronger and the well impact absorbing bumper impact beam have been studied without sacrificing bumper safety. In this study, the overall weight reduction possibility of rear bumper impact beam could be examined based on the variation of frontal, offset and corner impact crash capability by substituting a ultra high strength steel material (boron steel ) having tensile strength of 1.5 GPa grade instead of conventional steels. In addition, the section variations (open section, closed section, open section with 5 stays) of the bumper impact beam structure were examined carefully. It could be reached that this analysis could be well established and be contributed for design guide and the optimum design conditions of the automotive rear bumper impact beam development.

• Journal of the Korean Society for Railway
• /
• v.20 no.2
• /
• pp.173-181
• /
• 2017

The obstacle deflector sweeps obstacles off the track or absorbs crash energy with an energy absorber to prevent derailment of a train and to minimize damage and casualties after an accident. In this study, an obstacle deflector and its operational mechanism were designed with a tension-type energy absorber and a 4-bar linkage system. Also, a test method was suggested and verified with FEA (Finite Element Analysis) and UTM (Universal Test Machine) for testing of the static load and energy absorbing ability according to EN 15227 regulations. Through this study, an obstacle deflector that meets the EN 15227 standard was designed and a test method was suggested to adjust the collapse load easily and to verify it experimentally according to the design and verification procedure of the obstacle deflector.