• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.231-237
• /
• 2006

Recently railroad industry pulls a new interest with stability, fixed time characteristic, low environment pollution characteristic and mass transportation characteristic. With industrial development railroad it joins in, The many research and regulation production are coming to do. Specially like this activities are coming to be advanced actively from North America and Europe. From viewpoint of railway car production company, The vehicle production that a suitable Europe standard is essentiality for find a Europe market that The whole vehicle consuming hold it does a most big specific gravity. From this study, developed finite element model for analysis technology about crashworthiness of inside GM/RT 2100 standard and analyzed crash results.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.333-336
• /
• 2008

U-Channel Bridge is effective bridge type, because its edge beam performs role of barrier and enables to reduce additional dead loads. Nevertheless, there is possibility of bridge collapse under impact load due to car crash. Also, edge beam must have ability to induce safe driving and prevent falling accidents. Therefore, this study carries out analysis of behavior of edge beam and slab and evaluation of structural stability under impact loads, based on Korean Highway Bridge Design Specifications and AASHTO LRFD Bridge Design Specification. According to analysis result, the maximum stress of edge beam and slab satisfies specification of allowable stress.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.4
• /
• pp.160-166
• /
• 2005

In recent, recreational vehicles, which efficiently provide wide inner space for various utilities, are highly preferred in automobile market. Though those vehicles enable to load much luggage in space behind the last seat, in case of frontal impact with high velocity the luggage strongly collides into the seat back and the passengers in. the last seat could be severely injured. Therefore, high strength against luggage intrusion is required for the last seat, and it is regulated by law of ECE R17. In this study, for a recreational vehicle under developing, an analysis technique for simulating seat crash in accordance with luggage intrusion test of ECE R17 was investigated. The results exhibited good correlation with the test ones.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.8
• /
• pp.896-905
• /
• 2012

Recently, the application of the plastic material to automotive components and structures has steadily increased to satisfy demands on the saving of overall weight and the improvement of energy efficiency. The objective of this paper is to investigate the development of a bumper back-beam using a thermoplastic olefin (TPO). The bumper back-beam was designed to be manufactured from the injection molding process. In order to obtain a proper design of the bumper back-beam, three-dimensional finite element analyses were performed for various design alternatives. Stress-strain curves for different strain rates were measured by high speed tensile tests of the TPO to consider strain rate effects in the FEA. The influence of the sectional shape and the rib formation on the contact force-intrusion curves, the deflection and the energy absorption rate of the bumper back-beam was examined. From the results of the examination, a proper design of the bumper back-beam was acquired. The bumper back-beam consisting of TPO was fabricated from the injection moulding process and the vibration welding. Pendulum crash tests were carried out using the fabricated bumper back-beam. The results of the tests showed that the designed bumper back-beam can satisfy requirements of the federal motor vehicle safety standard (FMVSS). Through the comparison of the previously designed bumper back-beam with the newly designed bumper back beam, it was noted that the weight of the designed bumper back-beam is lighter than that of the previously designed bumper back beam by nearly 16 %. In addition, it was considered that the newly designed bumper back beam can improve recycling of the bumper back-beam.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.1
• /
• pp.33-44
• /
• 1995

As the occupant safety receives more attention from automobile industries. protection systems have been developed quite well. Developed protection systems must be evaluated through real tests in crash environment Since the real tests are extremely expensive. computer simulations are replaced for some prediction of the real test In the computer simulation. it is very crucial to express the real environment precisely in the modeling precess. The energy absorbing(EA) steering system has a very important rote in vehicle crashes because the occupant can hit the system directly. In this study. the EA steering system is modeled precisely. analyzed for the safely and designed by an optimization technology. First. the EA steering system is disassembled by parts and modeled by segments and joints. The segments are modeled by rigid bodies in motion and they have resistances in contact. Spring-damper elements and force-deflection curves are utilized to represent the joints. The body block test is cal lied out to validate. the modeling. When the test results are not enough for the detailed modeling. the differences between tests and simulations are minimized to calculate unknown parameters using optimization. The established model is applied to a crash simulation of a full-car model and tuned again. After the modeling is finished. components of the steering system are designed by an optimization algorithm. In the optimization process. the compound injury of a driver is defined and minimized to determine the chracteristics of the components. The second. order approximation algorithm has been adopted for the optimization.

• International Journal of Highway Engineering
• /
• v.9 no.2 s.32
• /
• pp.1-11
• /
• 2007

The rapid growths of economy and automobiles since the 1970's have caused serious traffic jams and environmental disruption in urban areas. To relieve these problems caused by urbanization, there should be considered alternative means of transportation modes. Many developed countries have accepted bicycles as a so called "Green Mode" for environmentally oriented strategies to increase the qualities of urban lives. Korea have also attempted various means to raise bicycle usages. In this research, significant factors affecting bicycle crashes at signalized intersections in urban areas were studied. The model results showed that Poisson regression is the best fit methodology for data modeling and revealed that traffic volume, a number of driveways, configuration of the ground, presence of bicycle path, school, and bus stop, residential area, size of intersection are significant factors affecting the bicycle crashes.

• The Journal of Korean Society for School & Community Health Education
• /
• v.13 no.2
• /
• pp.107-118
• /
• 2012

Backgrounds: In order to prevent dental injuries that often occur in child and adolescent, it is intended to investigate and assess actual state of the injury development, present epidemiological background, and consider and discuss for preparing preventive means against the injury development. Purpose: It was attempted to understand major features of dental injuries developing in child and adolescent and indentify high risk factors of dental injuries in child and adolescent. Methods: In this study, 523 cases of computerized data collected as disease entities of dental injuries among 1-18 years old patient visiting S university hospital located in Seoul in 2009 were analyzed and following results were obtained. Results: It was found that the ratio of dental injuries by genders in child and adolescent was 66.14% of male and 33.86% of female. It was shown also that causes of dental injuries by ages were more in order of falling, bumping, chewing, traffic accident, sports, violence, and crash. In addition places where dental injuries occur by ages were home in less than 5 year old group, park, playground, and play yard in 6-11 year old group, park, playground, and play yard also in 12-14 year old group, and stairs, road, and outdoor places such as mountain climbing, beach, and camping in 15-18 year old group. It was found that time rages when dental injuries in child and adolescent often develop were 15-19 o'clock for falling, 15-19 o'clock for crash, 15-19 o'clock for bumping, 19-03 o'clock for violence, 15-19 o'clock for traffic accident, 15-19 o'clock for sports activity, and 15-19 o'clock for chewing. Conclusion: Background of dental injury inducing factors are very complicated and diversified, so deep study and analysis are required for its prediction. Therefore, it seems necessary to identify risk factors by phases such as before, at, and after accident, establish strategies to reduce injury development, and develop and utilize necessary programs.

• Journal of Korean Society of Transportation
• /
• v.30 no.3
• /
• pp.57-70
• /
• 2012

Variable speed limit(VSL) is a useful speed management tool for alleviating traffic congestion and enhancing traffic safety. The purpose of this study is to identify promising freeway segments for safety enhancement through VSL operations. An ordered probit model was adopted to capture factors affecting freeway crash severity that can be used to support decision making for selecting the promising segments. Pseudo elasticity and marginal effects, which are outcomes of the ordered probit analysis, were used to determine priority of promising segments for traffic safety. The results of this study would be useful in installing VSL systems and developing traffic control and operations strategies in practice.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.3
• /
• pp.179-186
• /
• 2016

A study is to research crash barriers for vehicles that prevent road breakaway of vehicles and protect car passengers and pedestrians as absorbing impulse. Protection performance tests on vehicle passengers were simulated by using a LS-DYNA program. Through repetitive simulation on various speed and angles, passenger protection performance according to different impact condition was contemplated. Variable setting for the simulation was calculated as the mean weight of domestic car sales. By analyzing NASS (National Automotive Sampling System) of NHTSA (National Highway Traffic Safety Administration) of the U.S., the actual speed and collision angle section of accidents were computed. As a result, we confirmed that THIV (Theoretical Head Impact Velocity) and PHD (Post-impact Head Deceleration) are increased according to the impact speed and angle. Also, when the vehicle hit the guardrail post, we could be confirmed that the passenger protection performance greatly decreased.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.179-187
• /
• 2014

As an Accident data recorder (ADR) is a system to record a vehicle's status and dynamics information on the before and after of accident, Traffic accident investigation agencies and parts developers have a lot of interest to analyze an accident objectively and develop automotive safety devices by using real accident data, This study is to analyze an accident objectively and scientifically on the basis of traffic accident reconstruction with the use of output data of an event data recorder. This study is conducted double lane change test six times and slalom test one time as a field driving test and simulation. Based on the vehicle speed, the longitudinal and transverse acceleration, steering angle, driving path, and other kinds of information obtained from the field driving test, this study performed a simulation with PC-Crash program of reenacting and analyzing a traffic accident. The simulation was performed twice in the acceleration-steering angle input method and in the acceleration-driving path input method. By comparing the result of the field driving test with the results of the two simulations, we drew an analysis method with the optimal path reconstruction.