Strength Analysis of Luggage Intrusion into Recreational Vehicle Seat

RV 차량 시트의 적재물 침입 강도해석

  • Bae Jinwoo (Lear Korea R&D Center, World Merdian Venture Center) ;
  • Kang Sungjong (School of Mechanical and Automotive Engineering, Catholic University of Daegu)
  • 배진우 (리어 코리아 기술연구소) ;
  • 강성종 (대구가톨릭대학교 기계자동차공학부)
  • Published : 2005.07.01

Abstract

In recent, recreational vehicles, which efficiently provide wide inner space for various utilities, are highly preferred in automobile market. Though those vehicles enable to load much luggage in space behind the last seat, in case of frontal impact with high velocity the luggage strongly collides into the seat back and the passengers in. the last seat could be severely injured. Therefore, high strength against luggage intrusion is required for the last seat, and it is regulated by law of ECE R17. In this study, for a recreational vehicle under developing, an analysis technique for simulating seat crash in accordance with luggage intrusion test of ECE R17 was investigated. The results exhibited good correlation with the test ones.

Keywords

References

  1. D. S. Lim, S. H. Kim, H. Y. Kim and W. K. Na, 'Study on Application of High Strength Frame to Rear Center Belt-in Seat for Entry-level Sedan,' Spring Conference Proceeding, KSAE, pp.1139-1144, 2004
  2. H. Y. Kim and S. K. Lee, 'Prediction of Impact Characteristics for Automobile Seat,' Transactions of KSAE, Vol.7, No.3, pp.196-204, 1999
  3. LSTC, LS-DYNA Keyword User's Manual; Nonlinear Dynamic Analysis of Structure, May, 1999
  4. 'Regulation No.17 Annex 9 ; Test Procedure for Device Intended the Occupants against Displacement of Luggage,' E/ECE/TRANSE/ 505, pp.54-58, 2002
  5. S. J. Kang and B. K. Chun, 'An Effective Approach to Prediction of the Collapse Mode in Automotive Seat Structure,' Thin-Walled-Structures, Vol.37, pp.113-125, 2000 https://doi.org/10.1016/S0263-8231(00)00014-8
  6. S. J. Kang and B. K. Chun, 'Strength Analysis of Automotive Seat Belt Anchorage,' Int. J. of Vehicle Design, Vol.26, No.5, pp.496-508, 2001 https://doi.org/10.1504/IJVD.2001.005220
  7. J. M. Lim and I. S. Jang, 'The Strength Analysis of Passenger Car Seat Frame,' Transactions of KSAE, Vol.11, No.6, pp.205-212, 2003