• Journal of the Korean Institute of Navigation
• /
• v.11 no.1
• /
• pp.39-65
• /
• 1987

Since the middle of 1950's, containerization has been rapidly spread over the world in virtue of great merits providing to interensts, and the fundamental changes in port management and prot operations are resulted. As the container terminal is a complex system which is consisted of various subsystems, the treatment for improving the productivity is required in a comprehensive fashion, both in each of its parts and as an integrated system. This paper aims to make an intensive analysis of the Busan Container Terminal system, especially focusing on its subsystems such as ship operation system, storage system and transfer system. First of all, the intrinsic capacity of various subsystems is calculated and it is checked whether the current operation is being performed effectively through the formal analysis. Secondly, the suggestion is presented to improve the operation by considering the throughput that the port of Busan will have to accept in the near future. The results are as follows; 1) As the inefficiency is due to the imbalance between various subsystems at Busan terminal, transfer equipment level must be up to 31% for straddle carrier and 67% transfer crane above all. 2) The yard capacity must be increased by reducing the free dwell time of containers in order to accept the traffic volume smoothly in the near future. 3) The better way to reduce the port congestion is to change berthing rule from the FIFP to the Pre-allocated system by considering the ship arrival pattern.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.1
• /
• pp.53-66
• /
• 2012

Gangform compared with conventional wood and steel form is systemized form which has a capability to install and dismantle form at a time without repeating to assembly and disassembly small members. Gangform compared with ACS has some problems such as 1) Tower Crane load increase, 2) increase in safety incidence during climbing Gangform, 3) decrease in detachment operation productivity, 4) stop work due to climate impacts, and 5) decrease in labor cost, productivity, quality. A conceptual design model of automated Gangform climbing system is suggested for apartment housing construction to show its technical/economic feasibility and workers' safety while increasing operation productivity and concrete quality.

• The Journal of the Korea Contents Association
• /
• v.10 no.12
• /
• pp.109-119
• /
• 2010

Though the productivity increased by 50% as KBCT was the first to use ATC System in Korea, productivity is unlikely to be improved any longer because of unsatisfactory detailed automation technology development. Accordingly, the government embarked on 'high efficiency ATC technology development', but it is important to avoid overlapping with other advanced technology which is already developed, and to develop differentiated technology which has the way about it. To accomplish this, this paper suggested in-depth analysis about established domestic and overseas technologies, clear goal setting to achieve world-class level productivity, and rational development road map for success in technology development. Through this, as to the ATC automatization technology development, the ports of our country precedes in a competition with the ports of the neighboring country, and it will jump to the Northeast Asia Logistics-Hub-port and a role as growth engine for next-generation in our country will be played. In addition, the result of the technology development will become the standard of the performance evaluation of the relative technique of the domestic automated terminal, and will be leads the world in this field of technology.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.2
• /
• pp.33-40
• /
• 2010

Recently, the scale of construction work has been growing, and buildings are becoming higher. To enable greater efficiency of construction work, the use of vertical transportation equipment has been radically increasing. In this context, many studies have been conducted on tower cranes. While these studies have discussed issues such as the selection of tower cranes, the optimization of locations, and the hoisting time of tower cranes, there has been no research on the installation of tower cranes. As such, the installation of tower cranes on construction sites has been accomplished based on subjective judgment and technical assistance, and the experience of workers in equipment companies. Therefore, this study analyzes the productivity of tower cranes using simulation methodology, and proposes a generalized model of the installation process of tower cranes in order to offer a basic resource that site managers can directly utilize.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.11a
• /
• pp.336-345
• /
• 2006

최근 컨테이너 선박의 대형화는 물동량을 크게 증가 시켰으며, 이로 인해 컨테이너 터미널에서는 규모의 경제를 달성하고, 선사의 요구를 만족시키기 위해 노력하고 있다. 이에 대한대안이 양현부두(Indented berth)의 등장이다. 양현부두에는 대형 컨테이너선의 물량을 신속히 처리하기 위해 선석에서 컨테이너를 취급하는 장비인 안벽크레인(Quay Crane : QC)의 작업 대수가 일반부두(Conventional berth)보다는 많이 할당될 수 있다. 본 연구에서는 일반부두와 양현부두의 작업 생산성을 비교하였다. 이를 위하여 탐색기법인 GRASP(Greedy Randomized Adaptive Search Procedure)를 적용한 안벽크레인 일정계획 알고리즘을 이용하였다. 또한 컨테이너 터미널의 실제 자료를 이용하여 두 가지 형태의 부두에서의 본선작업 완료시간을 비교 하였다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2010.05a
• /
• pp.33-36
• /
• 2010

The attention in construction Automation is getting higher since it could be the answer to the lack of skilled labor by decrease in construction population and aging which adversely affects productivity and quality in the construction site. We are on the way to develop a construction automation system adequate for domestic circumstances in Korea; it is called RCA(Robotic-crane based Construction Automation)system. Climbing hydraulic robots system is a part of RCA system and makes Construction factory(CF) climb through the guide rail on the core wall. The safety of climbing hydraulic robots system is at issue due to the overloaded weight of CF. Preventing this issue, present study did the design verification through the structural analysis and the simulation. Mock-up test also was done to analyze the drive performance of climbing hydraulic robots system.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.11a
• /
• pp.15-16
• /
• 2011

Construction automation and robotics are being taken notice as an alternative to improve productivity and quality. Reflecting on these purpose, automation system, called RCA(Robotic-crane based Construction Automation) system, is developed and have been verified through a pilot project recently in Korea. To apply the RCA system in high-rise building effectively, each management factors of element technologies in the system is derived and assessed critical factor. The purpose of this study, management factors of element techniques, consisted of RCA system, is classified through questionnaires/interviews targeting system developers and construction managers in pilot project site, and critical factors is selected using AHP.

• Korean Management Science Review
• /
• v.22 no.2
• /
• pp.77-97
• /
• 2005

The traditional measures of a container port (or terminal) efficiency such as crane productivity, cargo throughput, etc. were generally presenting the partial efficiency since they evaluated only each individual factor and based on cross-sectional data. To overcome this problem, and in an effort to help port authorities develop a winning strategy in the increasingly competitive container transportation market, this Paper develops a meaningful set of benchmarks that will set the standard for best practices. In particular, this paper proposed a combined method to merge the DEA and simulation technique over time. To illustrate the usefulness of the proposed combined DEA/simulation model, this paper used the panel data of the four Gwangyang container terminals and seven Busan container terminals in Korea over the four-year period of 1999 through 2002.

• Management Science and Financial Engineering
• /
• v.5 no.1
• /
• pp.1-25
• /
• 1999

There is a worldwide trend to automate the handling operations in port container terminals in an effort to improve productivity and reduce labor cost. This study iscusses how to apply an AGV(automated guided vehicle) system to the handling of containers in the yard of a port container ter-minal. The main issue of this paper is how to assign tasks of container delivery to AGVs during ship operations in an automated port container terminal. A dual-cycle operation is assumed in which the loading and the discharging operation can be performed alternately. Mixed integer linear program-ming formulations are suggested for the dispatching problem. The completion time of all the dis-charging and loading operations by a quayside crane is minimized, and the minimization of the total travel time of AGVs is also considered as a secondary objective. A heuristic method using useful properties of the dispatching problem is suggested to reduce the computational time. The perfor-mance of the heuristic algorithm is evaluated in light of solution quality and computation time.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2005.06a
• /
• pp.165-170
• /
• 2005

The weight of a ship depends on the size of the ship. Normal lightweight of a ship is over 10,000 tons. So it is inevitable to divide a ship into about more than hundreds of lumps. Each of lumps is called as a block in shipbuilding. The sizes of blocks are decided by a yard's facilities. Among them lifting cranes are most decisive facilities. By block's size the productivity of a yard is decided very much. So it is very important to have a proper block division during shipbuilding. This paper refers to the recent trend of block division among yards. This paper would give an idea how to decide boundaries of blocks. Block division also decides both quality of a ship and work volume of it. These days the block erection method is changed dramatically due to use sea barge mounted crane for erection of a grand ring block. This paper explains the new trend of block division in shipbuilding.