• The Korean Journal of Mycology
• /
• v.8 no.1
• /
• pp.53-57
• /
• 1980

An undescribed black root rot of soybean, caused by Cylindrocladium crotalariae, was observed in Suweon area. The diseased plants showed yellowing at the top and dry rot at the root. Lesions of roots and stems in the soil were red to brown and main roots were cracked. Although not observed the disease in the field, leaves of inoculated test plants in the greenhouse exhibited circular, brown lesion surrounded by chloratic halos. The fungus was recovered in culture from the infected stem and root, and the perithecia of Calonectria crotalariae were demonstrated to be present as well as the cylindrocladium state. The fungus was pathogenic to the root, stem, petioles and leaves of soybean. The probable source of primary inoculum was microsclerotia formed in infected soybean root and stem from the previous season's soybean debris. Black root rot by this fungus was considered to be one of detrimental factors to the maximum yield of soybean. From the morphological and physiological characteristics and pathogenic behaviors, this fungus was identified as Cylindrocladium(Calonectria) crotalariae.

• Journal of Bio-Environment Control
• /
• v.13 no.3
• /
• pp.172-177
• /
• 2004

This experiment was conducted to investigate the effect of daytime temperature on fruit crack-ing in the paprika cv. Fiesta and cv. Jubilee under soil culture experiment of vinyl house for two years from 2003 to 2004. The rate of cracked fruit was higher in cv. Fiesta than cv. Jubilee and was the highest at the high daytime temperature of $34\pm$$1^{\circ}C$. and then rapidly increased after April becomes better weather conditions. The flesh hardness and the rate of flesh dry weight were lower in cv. Fiesta than cv. Jubilee and were the lowest at the high daytime temperature of $34\pm$1$^{\circ}C$. but the thickness of flesh was thicker in cv. Fiesta than cv. Jubilee and was the thinnest at the high daytime temperature of $34\pm$$1^{\circ}C$. Inorganic matter contents of flesh was observed no difference to the cultivars and also the temperature treatments. Root condition in harvesting time was better in cv. Fiesta than cv. Jubilee and was not difference in temperature treatments. Therefore, the rate of cracked fruit showed up a positive correlation to the flesh hardness, flesh dry weight, flesh firmness and root condition, and has not correlation to the flesh thickness and inorganic matter con-tents. In conclusion, differences in cultivar sensitivity and the highest rate of cracked fruit in daytime temperature of $34\pm$$1^{\circ}C$ may be partly due to difference in flesh characteristic and root condition but additional factors may be involved.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.4 s.148
• /
• pp.494-503
• /
• 2006

Inherent damage zone model is presented to explain the fatigue properties near the fatigue limit and the crack growth threshold consistently Inherent damage zone model assumes that the stress at a point which is located at a small distance, $r_0$, an inherent length of the material that represents the size of effective damage zone, from the crack initiation position governs the fatigue characteristics regardless of the geometric configuration of the specimen; smooth specimen, notched specimen or cracked specimens with short and long crack length. A special feature of the paper is using the exact stress distributions of notched and cracked specimens at the strength evaluations. Analytical elastic solutions by Neuber and Westergaard are employed for this purpose Relationship between fatigue limit of smooth specimen and threshold stress of cracked specimen, occurrence condition of non-propagating crack at the root of elliptic notch and circular hole and relationship between stress concentration factor and fatigue notch factor are discussed quantitatively based on the proposed model.

• Journal of Bio-Environment Control
• /
• v.11 no.3
• /
• pp.144-148
• /
• 2002

The overall objective of this study was to determine which variety of carrot-10 Japan varieties or 6 domestic varieties- produces the optimum quality, when cultivated on Jeju Island. Plant height, leaf number and leaf weight were observed to be more superior in the purebred variety ‘Jungang’than other varieties. further studies, however, skewed the crossing variety ‘Bureoun’was superior to all others. Furthermore, when comparing root diameter, root length and root weight, the ‘Bibary’was superior in both the purebred and crossing variety, When researching Japan varieties, the crossing variety, ‘Jung’showed an increase in underground root. The purebred variety ‘Donghae’also showed an increase in underground root. Marketable yields in domestic varieties were greatest in ‘Hapa’, while in Japan varieties, ‘Kaneko’was the most productive. The percentage of root cracked was 15％ greater in ‘Bureon’. In the purebred variety, Jungang, the percentage was only 10％. The percentage of roots branched was highest in ‘Hidomi’which showed a rate of 9%, The roots branched rate was 2% for ‘Jung’and 6％ for‘Donghae’. Considering the percentage of roots clacked or branched, the marketability of carrots was higher in Japan varieties in comparison with domestic varieties. Therefore we conclude that, in the cropping patterns of carrots, the domestic variety has an advantage over the Japan variety.

• Journal of Power System Engineering
• /
• v.12 no.4
• /
• pp.57-63
• /
• 2008

The last stage blade of the low pressure steam turbine remarkably affects turbine plant performance and availability Turbine manufacturers are continuously developing the low pressure last stage blades using the latest technology in order to achieve higher reliability and improved efficiency. They tend to lengthen the last stage blade and apply shrouds at the blades to enhance turbine efficiency. The long blades increase the blade tip circumferential speed and water droplet erosion at shroud is anticipated. Parts of integral shrouds of the last stage 40 inch blades were cracked and liberated recently in a combined cycle power plant. In order to analyze the root cause of the last stage blades shroud cracks, we investigated operational history, heat balance diagram, damaged blades shape, fractured surface of damaged blades, microstructure examination and design data, etc. Root causes were analyzed as the improper material and design of the blade. Notches induced by erosion and blade shroud were failed eventually by high cycle fatigue. This paper describes the root cause analysis and countermeasures for the steam turbine last stage blade shroud cracks of the combined cycle power plant.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.585-590
• /
• 2001

Turbine blade is subject to torsional load by torsion-mount, centrifugal load by rotation of rotor and repeated bending load by steam pressure. Turbine with partially cracked blade has normal working condition at initial repair time but vibratory working condition at middle repair time due to crack growth. Finite element analysis on turbine blade indicates that repeated bending load out of all loads is the most important factor on fatigue strength of turbine blade. Therefore, this study shows root mean square roughness has linear relation with stress intensity factor range in 12% Cr steel and can predict loading condition of fractured turbine blade.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.6
• /
• pp.170-177
• /
• 2001

Turbine blade is subject to torsional load by torsion-mount, centrifugal load by rotation of rotor and repeated bending load by steam pressure. Turbine with partially cracked blade has normal working condition at initial repair time but vibratory working condition at middle repair time due to crack growth. Finite element analysis on turbine blade indicates that repeated bending load out of all loads is the most important factor on fatigue strength of turbine blade. Therefore, this study shows root mean square roughness has linear relation with stress intensity factor range in 12% Cr steel and can predict loading condition of fractured turbine blade.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.9 no.1
• /
• pp.56-61
• /
• 2013

This paper presents the results of integrity assessment for the cracks happened in reactor vessel upper head penetration nozzles. The crack morphology for a boat sample from crack area was analyzed through microscope. The stress condition including weld residual stress around crack was analyzed using finite element analysis. From the results of crack morphology and stress condition, the crack was concluded as primary water stress corrosion cracking. The integrity of the cracked nozzle was assessed by the methodology provided in ASME Section XI. According to the assessment results, the remaining life of the cracked nozzle was 1.43 yrs. and the plant decided to repair it.

• The KSFM Journal of Fluid Machinery
• /
• v.3 no.4 s.9
• /
• pp.7-14
• /
• 2000

This paper provides integrity evaluation and root cause analysis for defects observed at volute tongue, or cutwater, of the operating centrifugal pump in power plant. The cause of the cracks are analyzed and reviewed from the viewpoint of the operation and maintenance of the pumps, and the sample obtained from the cracked volute tongue of the pump are examined. At first, in-situ hardness test and microstructure examination were performed to understand the cause of cracking at volute tongue. The evaluation of structural integrity and the possibility of the crack propagation is also evaluated. Cracks were typical intergranular cracking and propagated along with prior austenite grain boundary. At easing volute tongue, the hardness was higher than ASTM requirement and a large amount of intergranular Cr carbide was precipitated. These were due to high C content in material. P content was also higher than ASTM requirement. Therefore, Cr carbide precipitation and P segregation at grain boundary, caused by higher C and P content in material, resulted in intergranular cracking of casing volute tongue. This procedure for integrity evaluation and root cause analysis is used to guide, and support the pump designer and manufacturer's material selection and process design to avoid a costly, unplanned outage of plant.

• The Plant Pathology Journal
• /
• v.19 no.3
• /
• pp.181-183
• /
• 2003

Corky root symptoms caused by Pyrenochaeta lycopersici were observed on the roots and stem base of tomato plants in Korea. Symptoms on infected plants typically appeared as stunting and generally lacking vigor, and infected plants die back from the foliage tips after fruits have set. Brown lesions appearing with bands around the roots were characteristic symptoms of the disease. The lesions become swollen and cracked along the length of the root with corky appearance. Based on cultural and morphological characteristics, the fungus from the diseased plants was identified as Pyrenochaeta lycopersici. Pycnidia were solitary, globose to subglobose, brown to black, darker around the neck region, and measured 173-215 $\mu\textrm{m}$ in diameter with septate setae up to 102-132$\times$6.5 $\mu\textrm{m}$. Conidia were hyaline, unicellular, and 4.2-4.7$\times$l.5-2.0 $\mu\textrm{m}$ long. Optimum temperature for mycelial growth of the p. lycopersici isolates ranged from $20^{\circ}C$ to $25^{\circ}C$. Fifteen isolates off lycopersici were tested for pathogenicity to susceptible and tolerant cultivars of tomato plants by artificial inoculation. Three isolates of P. lycopersici induced typical corky root discoloration on susceptible tomato cultivars but not on tolerant tomato. This is the Erst report in Korea of tomato corky root disease caused by P. lycopersici.