• 한국균학회지
• /
• 제8권1호
• /
• pp.53-57
• /
• 1980

An undescribed black root rot of soybean, caused by Cylindrocladium crotalariae, was observed in Suweon area. The diseased plants showed yellowing at the top and dry rot at the root. Lesions of roots and stems in the soil were red to brown and main roots were cracked. Although not observed the disease in the field, leaves of inoculated test plants in the greenhouse exhibited circular, brown lesion surrounded by chloratic halos. The fungus was recovered in culture from the infected stem and root, and the perithecia of Calonectria crotalariae were demonstrated to be present as well as the cylindrocladium state. The fungus was pathogenic to the root, stem, petioles and leaves of soybean. The probable source of primary inoculum was microsclerotia formed in infected soybean root and stem from the previous season's soybean debris. Black root rot by this fungus was considered to be one of detrimental factors to the maximum yield of soybean. From the morphological and physiological characteristics and pathogenic behaviors, this fungus was identified as Cylindrocladium(Calonectria) crotalariae.

• 생물환경조절학회지
• /
• 제13권3호
• /
• pp.172-177
• /
• 2004

착색단고추 비닐하우스 토경재배시 품종별 온도조건에 따른 열과 발생원인을 구명코자 하였다 열과발생률은 품종간에는 Fiesta가 Jubilee보다 높았고 온도처리간에는 $34^{\circ}C$ 고온구에서 높았다. 그리고 환경조건이 좋아지는 4월 이후에 급격히 증가하였다. 과육특성 조사결과 Fiesta품종과 고온처리구에서 과육경도와 건물률이 낮았으나 과육두께는 경향이 일정치 않았다. 과육의 무기성분 함량은 품종간, 온도처리간에 차이가 없었다. 수확시 뿌리상태는 Fiesta품종이 Jubilee보다 좋았고, 온도처리간에는 차이가 없었다. 이상의 결과로 과육의 경도, 건물률, 치밀도 및 뿌리상태 등이 열과발생에 직접적인 영향을 미치고 과육두께나 과육의 무기성분 함량등은 열과발생과 상관이 없는 것으로 나타났다.

• 대한조선학회논문집
• /
• 제43권4호
• /
• pp.494-503
• /
• 2006

Inherent damage zone model is presented to explain the fatigue properties near the fatigue limit and the crack growth threshold consistently Inherent damage zone model assumes that the stress at a point which is located at a small distance, $r_0$, an inherent length of the material that represents the size of effective damage zone, from the crack initiation position governs the fatigue characteristics regardless of the geometric configuration of the specimen; smooth specimen, notched specimen or cracked specimens with short and long crack length. A special feature of the paper is using the exact stress distributions of notched and cracked specimens at the strength evaluations. Analytical elastic solutions by Neuber and Westergaard are employed for this purpose Relationship between fatigue limit of smooth specimen and threshold stress of cracked specimen, occurrence condition of non-propagating crack at the root of elliptic notch and circular hole and relationship between stress concentration factor and fatigue notch factor are discussed quantitatively based on the proposed model.

• 생물환경조절학회지
• /
• 제11권3호
• /
• pp.144-148
• /
• 2002

국내산 ‘하파’외 4품종과 일본산 ‘Kaneko외 9품종을 2000년 8월 2일에 일반농가포장에 파종하였다. 국내산과 일본산 비교 재배하여 이 지역에 가장 적합하고 우수한 품질의 당근 품종을 선발하기 위하여 실험을 수행하였다. 초장, 엽수 및 엽중은 국내산인 경우 고정종인 ‘중앙’이 각각 60.7 cm, 9.3매, 72.9 g로 가장 우수하였고 교배종에서는 ‘부러운’이 각각 60.3 cm, 8.9매, 65.42으로 가장 우수하였다. 국내산중 근경, 근장 및 근중은 교배종, 고정종 모두에서 ‘비바리’가 52mm, 15.7cm, 275 g으로 우수하였으며 일본산인 경우 교배종은 ‘Sei’이 56 mm, 14.6 cm, 319 g으로 양호하였고 고정종은 ‘Tokai’가 가장 우수하였다. 상품수량은 국·내산에서 ‘하파’(5,472 kg/10a), 일본산은 ‘Kaneko’(5,736 kg/10a)가 가장 높았고 그 외의 품종들은 국내외산 모두 비슷한 경향을 보였다 열근의 발생율은 ‘부러운’이 15%정도로 높았고 고정종인 ‘중앙’이 10% 정도였다. 기근 발생율은 ‘Hidomi’가 9%로 가장 높았고 ‘Sei’과 ‘Tokai’순으로 각각 2%, 6%로 나타내었다. 이로 미루어 볼 때 당근의 주요 상품성을 결정하는 기근과 열근의 발생율은 국내산보다 일본산이 높아 앞으로 재배법을 좀 더 개발하면 국내산 품종이 더 제주지역의 재배에 유리할 것으로 기대되었다.

• 동력기계공학회지
• /
• 제12권4호
• /
• pp.57-63
• /
• 2008

The last stage blade of the low pressure steam turbine remarkably affects turbine plant performance and availability Turbine manufacturers are continuously developing the low pressure last stage blades using the latest technology in order to achieve higher reliability and improved efficiency. They tend to lengthen the last stage blade and apply shrouds at the blades to enhance turbine efficiency. The long blades increase the blade tip circumferential speed and water droplet erosion at shroud is anticipated. Parts of integral shrouds of the last stage 40 inch blades were cracked and liberated recently in a combined cycle power plant. In order to analyze the root cause of the last stage blades shroud cracks, we investigated operational history, heat balance diagram, damaged blades shape, fractured surface of damaged blades, microstructure examination and design data, etc. Root causes were analyzed as the improper material and design of the blade. Notches induced by erosion and blade shroud were failed eventually by high cycle fatigue. This paper describes the root cause analysis and countermeasures for the steam turbine last stage blade shroud cracks of the combined cycle power plant.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.585-590
• /
• 2001

Turbine blade is subject to torsional load by torsion-mount, centrifugal load by rotation of rotor and repeated bending load by steam pressure. Turbine with partially cracked blade has normal working condition at initial repair time but vibratory working condition at middle repair time due to crack growth. Finite element analysis on turbine blade indicates that repeated bending load out of all loads is the most important factor on fatigue strength of turbine blade. Therefore, this study shows root mean square roughness has linear relation with stress intensity factor range in 12% Cr steel and can predict loading condition of fractured turbine blade.

• 한국자동차공학회논문집
• /
• 제9권6호
• /
• pp.170-177
• /
• 2001

Turbine blade is subject to torsional load by torsion-mount, centrifugal load by rotation of rotor and repeated bending load by steam pressure. Turbine with partially cracked blade has normal working condition at initial repair time but vibratory working condition at middle repair time due to crack growth. Finite element analysis on turbine blade indicates that repeated bending load out of all loads is the most important factor on fatigue strength of turbine blade. Therefore, this study shows root mean square roughness has linear relation with stress intensity factor range in 12% Cr steel and can predict loading condition of fractured turbine blade.

• 한국압력기기공학회 논문집
• /
• 제9권1호
• /
• pp.56-61
• /
• 2013

This paper presents the results of integrity assessment for the cracks happened in reactor vessel upper head penetration nozzles. The crack morphology for a boat sample from crack area was analyzed through microscope. The stress condition including weld residual stress around crack was analyzed using finite element analysis. From the results of crack morphology and stress condition, the crack was concluded as primary water stress corrosion cracking. The integrity of the cracked nozzle was assessed by the methodology provided in ASME Section XI. According to the assessment results, the remaining life of the cracked nozzle was 1.43 yrs. and the plant decided to repair it.

• 한국유체기계학회 논문집
• /
• 제3권4호
• /
• pp.7-14
• /
• 2000

This paper provides integrity evaluation and root cause analysis for defects observed at volute tongue, or cutwater, of the operating centrifugal pump in power plant. The cause of the cracks are analyzed and reviewed from the viewpoint of the operation and maintenance of the pumps, and the sample obtained from the cracked volute tongue of the pump are examined. At first, in-situ hardness test and microstructure examination were performed to understand the cause of cracking at volute tongue. The evaluation of structural integrity and the possibility of the crack propagation is also evaluated. Cracks were typical intergranular cracking and propagated along with prior austenite grain boundary. At easing volute tongue, the hardness was higher than ASTM requirement and a large amount of intergranular Cr carbide was precipitated. These were due to high C content in material. P content was also higher than ASTM requirement. Therefore, Cr carbide precipitation and P segregation at grain boundary, caused by higher C and P content in material, resulted in intergranular cracking of casing volute tongue. This procedure for integrity evaluation and root cause analysis is used to guide, and support the pump designer and manufacturer's material selection and process design to avoid a costly, unplanned outage of plant.

• The Plant Pathology Journal
• /
• 제19권3호
• /
• pp.181-183
• /
• 2003

Corky root symptoms caused by Pyrenochaeta lycopersici were observed on the roots and stem base of tomato plants in Korea. Symptoms on infected plants typically appeared as stunting and generally lacking vigor, and infected plants die back from the foliage tips after fruits have set. Brown lesions appearing with bands around the roots were characteristic symptoms of the disease. The lesions become swollen and cracked along the length of the root with corky appearance. Based on cultural and morphological characteristics, the fungus from the diseased plants was identified as Pyrenochaeta lycopersici. Pycnidia were solitary, globose to subglobose, brown to black, darker around the neck region, and measured 173-215 $\mu\textrm{m}$ in diameter with septate setae up to 102-132$\times$6.5 $\mu\textrm{m}$. Conidia were hyaline, unicellular, and 4.2-4.7$\times$l.5-2.0 $\mu\textrm{m}$ long. Optimum temperature for mycelial growth of the p. lycopersici isolates ranged from $20^{\circ}C$ to $25^{\circ}C$. Fifteen isolates off lycopersici were tested for pathogenicity to susceptible and tolerant cultivars of tomato plants by artificial inoculation. Three isolates of P. lycopersici induced typical corky root discoloration on susceptible tomato cultivars but not on tolerant tomato. This is the Erst report in Korea of tomato corky root disease caused by P. lycopersici.