• 한국신뢰성학회지:신뢰성응용연구
• /
• 제13권1호
• /
• pp.45-53
• /
• 2013

In this paper, we analyze the failure mechanism of the washer pump to find what is the failure cause in the road environment. The statistics show the field common failure mode is inner corrosion. The failure mechanism is assumed that the inner part of washer pump is corroded due to inflow of moisture through vent hole. To prevent the failure, we can think a method that is covering the vent hole. In general, the vent hole is designed to play an important role in an automobile parts. So, we need to prove the vent hole is not necessary. The first purpose of this paper is to make sure that the vent hole does not affect the durability of washer pump using the analysis of operating condition. The second purpose is to compare the durability properties if the vent hole is covered.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.25-26
• /
• 2007

At the time when nanostructured materials (NSMs) are becoming a major focus of materials research, the attention of researchers is turning more to their mechanical performance. In contrast with conventional coarse grained materials, which are either strong or ductile, but rarely both at the same time, it is expected that with NSMs both high strength and ductility can be achieved and confirmed by several experimental studies. In spite of the significant interest and efforts in the mechanical properties of NSMs, deformation mechanisms during plastic deformation as well as elastic deformation are not well established yet. In this talk, the deformation mechanisms of NSMs under various grain sizes, temperatures and strain rates were investigated. It is based on recent modelling that appears to provide a conclusive description of the phenomenology and the mechanisms underlying the mechanical properties of NSMs. Based on the theoretical model that provides an adequate description of the grain size dependence of elasticity and plasticity covering all grain size range from coarse down to the nanoscale, the tensile deformation response of NSMs, especially focusing on the deformation mechanisms was investigated.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 추계 학술논문 발표대회
• /
• pp.83-86
• /
• 2007

This study provides the practical application of the concrete using fiber to protect from fire studied by previous research. The fluidity and air content is satisfied with the targets, and the compressive strength is over 60MPa on W/B 35% and 80MPa on W/B 20 and 25%. For the properties of the spalling after the fire test, there is no spalling or slight occurrence on the specimens. However, for the RC column, the covering concrete fall off caused by spalling occurrence. Based on the results, it is thought that the fiber content should be put into the safety factor to prevent spalling for the structures.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.266-267
• /
• 2007

$Ba_{0.5}Sr_{0.5}TiO_3$(BST) films with different deposition temperatures were deposited on $Al_2O_3$ substrate by Nd:YAG Pulsed Laser Deposition(PLD). The deposition conditions to achieve high crystal structures and dielectric properties were optimized for both techniques. The structural characterization on the BST thin films was performed by X-Ray Diffraction(XRD) and Atomic Force Microscopy (AFM). Effects of post-deposition annealing of BST films were investigated. The best dielectric properties were obtained on $800^{\circ}C$ deposited BST film with post-deposition annealing at $1100^{\circ}C$ in flowing $O_2$ atmosphere for 2hours.

• 천문학회보
• /
• 제44권2호
• /
• pp.73.3-73.3
• /
• 2019

The AGN unification model suggested the presence of obscuring material, a dusty torus, to explain the various types of AGN. IR SED model fitting is a crucial tool to probe the structure and properties of the dusty torus. We use a sample of 16 local quasi-stellar objects in Martinez-Paredes et al. (2017) with obtained NIR and MIR high-angular resolution (~0.3") imaging data from EMIR, CIRCE and CanariCam on the 10.4-m Gran Telescopio CANARIAS (GTC) while 4 objects have NIR high-angular resolution photometry from NICMOS/HST from the literature. The unresolved NIR emission from the NIR image analysis and low-resolution Spitzer/IRS spectra are used to construct NIR-MIR SEDs covering a larger spectral range. We investigate the sensitivity of the geometrical (e.g. viewing angle) and physical parameters (e.g. optical depth) of the clumpy dusty torus model of Nenkova et al. and the clumpy disk+outflow model of Hoenig et al. We aim to investigate the minimal dataset needed to well constrain the parameters of the models and derive the properties of the dusty torus. These results will allow us to plan future observations for a larger sample of high luminosity AGNs with the James Webb Space Telescope and the Giant Magellan Telescope.

• 생물환경조절학회지
• /
• 제10권3호
• /
• pp.141-147
• /
• 2001

주요 플라스틱 필름하우스 피복재의 광학 및 물리적 특성을 구명하고자 시설재배농가에서 일반적으로 이용하는 EVA(ethylene vinyl acetate, 0.08 mm) 필름을 비롯하여 기능성 피복재인 PO 방무필름(polyorefine antifog film. 0.1 mm), 불소필름(fluoric film, 0.06 mm), 산광필름(diffused film, 0.15 mm), PO 방적필름 (polyorefine antidrop film, 0.15 mm) 등과 경질 소재인 PET(polyethylene terephthalate, 0.5 mm)등 6종의 필름을 1997년에 폭 5.4m 길이 18.5m, 높이 2.9m의 소형 플라스틱필름 하우스에 각각 피복하고 3년간 (1997~1999) 필름들의 주요 특성을 조사하였다. 피복 후 30개월 경과시의 필름의 분광투과특성은 UV(300~400nm)가 산광 및 PET 필름에서 25~26% 밖에 투과되지 않은 반면, 불소필름에서는 76%, 기타 필름에서는 63~66% 투과되었다. PAR(광합성유효광, 400~700 nm)의 투과율은 불소(86.5%), 방적(80.5%), PET(76.3%), 방무(75.5%), EVA(74.1%), 산광필름(61.9%) 순으로 투과량이 많았다. 피복 후 7일경과 30개월경간의 PAR 투과율의 감소는 EVA가 12%로 가장 컸으며 방적필름이 6%로 가장 작았다. 토마토 작물군락하의 광도는 EVA 필름에 비해 산광필름에 비해 산광필름이 2.5배, 방적필름과 PET가 1.4배 각각 높았다. 필름의 인장저항력은 불소필름이 경질 소재이므로 월등히 강하였으며 다음으로 방적과 산광필름도 강한 경향이었다. 한편 충격저항력은 불소필름이 가장 약했고 방적과 산광필름은 강한 편이었다. 하우스내의 주간온도는 광투과율의 경향과 비슷하였으나, 야간온도는 PET, 불소, 방적, 산광, 방무, EVA 순으로 높았는데 특히 PET는 EVA보다 평균 4$^{\circ}C$ 높게 유지되었다. 하우스내로 투입된 일사량은 EVA 보다 불소필름 32%, 방적필름 15% PET 11%, 방무필름 4% 각각 많았는 반면, 산광필름은 7% 적었다.

• 대한수학회보
• /
• 제38권4호
• /
• pp.773-786
• /
• 2001

On the setting of the half-space of the Euclidean n-space, we consider harmonic Bergman spaces and we also study properties of the reproducing kernel. Using covering lemma, we find some equivalent quantities. We prove that if lim$ lim\limits_{i\rightarrow\infty}\frac{\mu(K_r(zi))}{V(K_r(Z_i))}$ then the inclusion function $I : b^p\rightarrow L^p(H_n, d\mu)$ is a compact operator. Moreover, we show that if f is a nonnegative continuous function in $L^\infty and lim\limits_{Z\rightarrow\infty}f(z) = 0, then T_f$ is compact if and only if f $\in$ $C_{o}$ (H$_{n}$ ).

• 천문학논총
• /
• 제27권4호
• /
• pp.235-236
• /
• 2012

We carry out a systematic study of Galactic supernova remnants (SNRs) using the AKARI Far Infrared Surveyor (FIS) survey data. The AKARI Infrared Astronomical Satellite observed the whole sky using the four FIS bands covering 50 to 180 microns with ~1 arcmin resolution. The all-sky coverage with high-spatial resolution provides an unprecedented opportunity to study diffuse, extended far-infrared (FIR) sources such as SNRs. We have searched for FIR counterparts to all 274 known Galactic SNRs, and investigate their FIR properties of identified SNRs. We report preliminary results of the study.

• 대한수학회보
• /
• 제57권5호
• /
• pp.1127-1142
• /
• 2020

In 2016, the Hurwitz metric was introduced by D. Minda in arbitrary proper subdomains of the complex plane and he proved that this metric coincides with the Poincaré's hyperbolic metric when the domains are simply connected. In this paper, we provide an alternate definition of the Hurwitz metric through which we could define a generalized Hurwitz metric in arbitrary subdomains of the complex plane. This paper mainly highlights various important properties of the Hurwitz metric and the generalized metric including the situations where they coincide with each other.

• 소성∙가공
• /
• 제14권1호
• /
• pp.65-70
• /
• 2005

A phase mixture model was employed to simulate the deformation behaviour of metallic materials covering a wide grain size range from micrometer to nanometer scale. In this model a polycrystalline material is treated as a mixture of two phases: grain interior phase whose plastic deformation is governed by dislocation and diffusion mechanisms and grain boundary 'phase' whose plastic flow is controlled by a boundary diffusion mechanism. The main target of this study was the effect of grain size on stress and its strain rate sensitivity as well as on the strain hardening. Conventional Hall-Petch behaviour in coarse grained materials at high strain rates governed by the dislocation glide mechanism was shown to be replaced with inverse Hall-Petch behaviour in ultrafine grained materials at low strain rates, when both phases deform predominantly by diffusion controlled mechanisms. The model predictions are illustrated by examples from literature.