• Journal of Applied Reliability
• /
• v.13 no.1
• /
• pp.45-53
• /
• 2013

In this paper, we analyze the failure mechanism of the washer pump to find what is the failure cause in the road environment. The statistics show the field common failure mode is inner corrosion. The failure mechanism is assumed that the inner part of washer pump is corroded due to inflow of moisture through vent hole. To prevent the failure, we can think a method that is covering the vent hole. In general, the vent hole is designed to play an important role in an automobile parts. So, we need to prove the vent hole is not necessary. The first purpose of this paper is to make sure that the vent hole does not affect the durability of washer pump using the analysis of operating condition. The second purpose is to compare the durability properties if the vent hole is covered.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.25-26
• /
• 2007

At the time when nanostructured materials (NSMs) are becoming a major focus of materials research, the attention of researchers is turning more to their mechanical performance. In contrast with conventional coarse grained materials, which are either strong or ductile, but rarely both at the same time, it is expected that with NSMs both high strength and ductility can be achieved and confirmed by several experimental studies. In spite of the significant interest and efforts in the mechanical properties of NSMs, deformation mechanisms during plastic deformation as well as elastic deformation are not well established yet. In this talk, the deformation mechanisms of NSMs under various grain sizes, temperatures and strain rates were investigated. It is based on recent modelling that appears to provide a conclusive description of the phenomenology and the mechanisms underlying the mechanical properties of NSMs. Based on the theoretical model that provides an adequate description of the grain size dependence of elasticity and plasticity covering all grain size range from coarse down to the nanoscale, the tensile deformation response of NSMs, especially focusing on the deformation mechanisms was investigated.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.11a
• /
• pp.83-86
• /
• 2007

This study provides the practical application of the concrete using fiber to protect from fire studied by previous research. The fluidity and air content is satisfied with the targets, and the compressive strength is over 60MPa on W/B 35% and 80MPa on W/B 20 and 25%. For the properties of the spalling after the fire test, there is no spalling or slight occurrence on the specimens. However, for the RC column, the covering concrete fall off caused by spalling occurrence. Based on the results, it is thought that the fiber content should be put into the safety factor to prevent spalling for the structures.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.266-267
• /
• 2007

$Ba_{0.5}Sr_{0.5}TiO_3$(BST) films with different deposition temperatures were deposited on $Al_2O_3$ substrate by Nd:YAG Pulsed Laser Deposition(PLD). The deposition conditions to achieve high crystal structures and dielectric properties were optimized for both techniques. The structural characterization on the BST thin films was performed by X-Ray Diffraction(XRD) and Atomic Force Microscopy (AFM). Effects of post-deposition annealing of BST films were investigated. The best dielectric properties were obtained on $800^{\circ}C$ deposited BST film with post-deposition annealing at $1100^{\circ}C$ in flowing $O_2$ atmosphere for 2hours.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.73.3-73.3
• /
• 2019

The AGN unification model suggested the presence of obscuring material, a dusty torus, to explain the various types of AGN. IR SED model fitting is a crucial tool to probe the structure and properties of the dusty torus. We use a sample of 16 local quasi-stellar objects in Martinez-Paredes et al. (2017) with obtained NIR and MIR high-angular resolution (~0.3") imaging data from EMIR, CIRCE and CanariCam on the 10.4-m Gran Telescopio CANARIAS (GTC) while 4 objects have NIR high-angular resolution photometry from NICMOS/HST from the literature. The unresolved NIR emission from the NIR image analysis and low-resolution Spitzer/IRS spectra are used to construct NIR-MIR SEDs covering a larger spectral range. We investigate the sensitivity of the geometrical (e.g. viewing angle) and physical parameters (e.g. optical depth) of the clumpy dusty torus model of Nenkova et al. and the clumpy disk+outflow model of Hoenig et al. We aim to investigate the minimal dataset needed to well constrain the parameters of the models and derive the properties of the dusty torus. These results will allow us to plan future observations for a larger sample of high luminosity AGNs with the James Webb Space Telescope and the Giant Magellan Telescope.

• Journal of Bio-Environment Control
• /
• v.10 no.3
• /
• pp.141-147
• /
• 2001

To compare to the optical and physical properties of covering materials for plastic greenhouse, EVA(ethylene vinyl acetate, 0.08 mm), polyorefine antifog (0.1 mm), fluoric (0.06 mm), diffused (0.15 mm), polyorefine antidrop (0.15 mm) and PET (polyethylene terephthalate, 0.5 mm) films were used. The small greenhouse (5.4$\times$18.5$\times$2.9 m, W$\times$L$\times$H) investigated during 3 years form 1997 to 1999. After covering materials were used for greenhouse covering during 30 months, UV (300-400 nm) transmittances of diffused film and PET were appeared from 25 to 26%, while those of fluoric film and the other films were 76% and from 63 to 67%. For PAR (photosynthetically active radiation, 400-700 nm), the transmittances of fluoric, antidrop, PET, antifog, EVA, and diffused film were 86.5%, 80.5%, 76.3%, 75.5%, 74.1% and 61.9% respectively. The losses of PAR transmittance of EVA and the antidrop film during period between 7 days and 30 months were higher value 12% and lower value 6% than any other film. Under the canopy of tomato plants, light intensities of the diffused film and the antifog film were 2.5 times and 1.4 times higher than those of PET. Tensile resistances of fluoric film at the break point were the higher than those of antifog film and diffused film. While impact resistance of the antidrop film was the highest value, but the fluoric film was the lowest. Air temperature inside the greenhouse for the day showed to be changed the similar light transmittance of the films. But the increasing order of air temperature for the night was PET, fluoric, antidrop, diffused, antifog and EVA film. Especially, air temperature in the PET was 4$^{\circ}C$ higher than that in the EVA. Solar radiations of the fluoric film, the antidrop film, PET and antifog film in the greenhouse were 32%, 15%, 11% and 4% higher than those of PET. However, those of the diffused film was 7% less than PET.

• Bulletin of the Korean Mathematical Society
• /
• v.38 no.4
• /
• pp.773-786
• /
• 2001

On the setting of the half-space of the Euclidean n-space, we consider harmonic Bergman spaces and we also study properties of the reproducing kernel. Using covering lemma, we find some equivalent quantities. We prove that if lim$ lim\limits_{i\rightarrow\infty}\frac{\mu(K_r(zi))}{V(K_r(Z_i))}$ then the inclusion function $I : b^p\rightarrow L^p(H_n, d\mu)$ is a compact operator. Moreover, we show that if f is a nonnegative continuous function in $L^\infty and lim\limits_{Z\rightarrow\infty}f(z) = 0, then T_f$ is compact if and only if f $\in$ $C_{o}$ (H$_{n}$ ).

• Publications of The Korean Astronomical Society
• /
• v.27 no.4
• /
• pp.235-236
• /
• 2012

We carry out a systematic study of Galactic supernova remnants (SNRs) using the AKARI Far Infrared Surveyor (FIS) survey data. The AKARI Infrared Astronomical Satellite observed the whole sky using the four FIS bands covering 50 to 180 microns with ~1 arcmin resolution. The all-sky coverage with high-spatial resolution provides an unprecedented opportunity to study diffuse, extended far-infrared (FIR) sources such as SNRs. We have searched for FIR counterparts to all 274 known Galactic SNRs, and investigate their FIR properties of identified SNRs. We report preliminary results of the study.

• Bulletin of the Korean Mathematical Society
• /
• v.57 no.5
• /
• pp.1127-1142
• /
• 2020

In 2016, the Hurwitz metric was introduced by D. Minda in arbitrary proper subdomains of the complex plane and he proved that this metric coincides with the Poincaré's hyperbolic metric when the domains are simply connected. In this paper, we provide an alternate definition of the Hurwitz metric through which we could define a generalized Hurwitz metric in arbitrary subdomains of the complex plane. This paper mainly highlights various important properties of the Hurwitz metric and the generalized metric including the situations where they coincide with each other.

• Transactions of Materials Processing
• /
• v.14 no.1 s.73
• /
• pp.65-70
• /
• 2005

A phase mixture model was employed to simulate the deformation behaviour of metallic materials covering a wide grain size range from micrometer to nanometer scale. In this model a polycrystalline material is treated as a mixture of two phases: grain interior phase whose plastic deformation is governed by dislocation and diffusion mechanisms and grain boundary 'phase' whose plastic flow is controlled by a boundary diffusion mechanism. The main target of this study was the effect of grain size on stress and its strain rate sensitivity as well as on the strain hardening. Conventional Hall-Petch behaviour in coarse grained materials at high strain rates governed by the dislocation glide mechanism was shown to be replaced with inverse Hall-Petch behaviour in ultrafine grained materials at low strain rates, when both phases deform predominantly by diffusion controlled mechanisms. The model predictions are illustrated by examples from literature.