• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.11
• /
• pp.84-90
• /
• 2010

In this paper, the reduced size of broad bandpass filter with parallel coupled line structure is presented. This proposed filter can control bandwidth of narrow to broadband by adjusting the coupling coefficient. The conventional filter is operated with a narrow band. If a higher bandwidth is desired than the conventional narrow bandwidth, it is hard to realize due to the coupling coefficient between feeding line and resonator. In this paper, to overcome this limitation, a proposed bandpass filter is designed with reduced size due to SIR(Stepped Impedance Resonator) and multi-grade type structures than conventional one, and it has characteristics of adjusting bandwidth freely as per quantity of coupling coefficient. The proposed bandpass filter that, experimental results of insertion and return losses are 0.42 dB and 20.9 dB with bandwidth of 60 % at the center frequency of 5.8 GHz, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4A
• /
• pp.407-413
• /
• 2011

In this paper, the reduced size of broad bandpass filter with parallel coupled line structure is presented. This proposed filter can control bandwidth of narrow to broadband by adjusting the coupling coefficient. The conventional filter is operated with a narrow band. If a higher bandwidth is desired than the conventional narrow bandwidth, it is hard to realize due to the coupling coefficient between feeding line and resonator. In this paper, to overcome this limitation, a proposed bandpass filter is designed with reduced size due to SIR (Stepped Impedance Resonator), U-shaped open stub with hair-pin and vertical-type structure than conventional one, and it has characteristics of adjusting bandwidth freely as per quantity of coupling coefficient. The proposed bandpass filter that, experimental results of insertion and return losses are 0.42 dB and 24.5 dB with bandwidth of 60 % at the center frequency of 5.8 GHz, respectively.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.6
• /
• pp.31-37
• /
• 2008

In order to organize the Intelligent Transport System(ITS) as a communication equipment, the satellite and wireless system demand broadband characteristics for collecting information from the wide road. Band-pass filters (BPF) or broad BPFs used in such communication system are required for broadband characteristics. This paper presents a design of such broad BPF which can be used in the system. Designed BPF which was difficult to get broadband characteristics after realization, become possible to realize filter with broad bandwidth and compact structure using parallel coupled line. The designed filter achieved the insertion losses improved by 0.4 dB and the return losses improved by 17.4 dB respectively with 60% of bandwidth at the 5.8 GHz of the center frequency, respectively.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.288-293
• /
• 2003

In this paper, Filter could use to IMT2000 repeater using resonator of Comb-line form that has waveguide structure and designed. Coupled resonators designed using slot in wall between resonators to compact. 5-stage resonators have equal structure and input and output part was optimized to get into minimum impedance. Band pass filter characteristic satisfied design condition as result that used Chebyshev function that have 0.2 dB ripple and analyze using simulation tool.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.10 s.113
• /
• pp.935-942
• /
• 2006

In this paper, a novel theory of realizing the series capacitor with broadside coupled suspended substrate stripline (BCSSS) is proposed. The proposed theory is relatively simple because the method of odd mode analysis is only applied: However, this theory supplies reliable result by considering the line effective width and end effect caused by the fringing field. The simulation results are presented to compare and analyze the characteristics of the ideal lumped capacitor and the coupled line capacitor. Also, the capacitive gap coupled line band-pass filter based on the proposed theory are designed and fabricated. The results prove successfully the validity of the proposed theory.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.4
• /
• pp.312-319
• /
• 2014

When distributed generation such as a wind power system is connected to the grid, it should meet grid requirements like IEEE Std. 1547, which regulates the anti-islanding method. Since the islanding may cause damage on electrical equipments or safety hazards for utility line worker, a distributed generation should detect it as soon as possible. This paper proposes a hybrid anti-islanding method coupled with the active and passive detection methods. To enhance the harmonic extraction capability for an active harmonic injection method, cascaded second-order band-pass filter and signal processing scheme are employed. Simulation and experiments are carried out under the islanding test condition specified in IEEE Std. 1547. Passive over/under voltage and over/under frequency methods are combined with the active method to improve the detection speed under certain condition. The simulation and experimental results are presented to verify that the proposed hybrid anti-islanding method can effectively detect the islanding.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.7
• /
• pp.1255-1260
• /
• 2009

Microstrip interdigital filter is designed with the width and length of a resonator, the gap distance between resonators and the location of a tap. When designing filters, it is a benefit to design with few design parameters comparing to many design parameters. In this paper we design and implement two microstrip interdigital filters operating in the UWB(Ultra Wide-Band) frequency band, one using a fixed width of a resonator and the other using a different width of resonators. The test results of the implemented filters show that the low-band high filter with a fixed width has the insertion loss of 1.49dB, -10dB band width of 720MHz, -35.7dBattenuation at 4.8GHzand below -13dB of S11. The filter with a different width of resonators has the insertion loss of 1.6dB, -10dBbandwidth of 1.63GHz and below-8dBof S11.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.5
• /
• pp.424-429
• /
• 2016

This paper presents dual-mode ring-resonator bandpass filter using LUC of artificial-transmission-lines. The conventional ring-resonator bandpass filter has limitation in miniaturization because the conventional ring-resonator is based on a one wavelength operation, and problem due to undesire harmonics. The ring-resonator bandpass filter is miniaturized and show higher order mode rejection by configuring a ring-resonator with LUC of artificial-transmission-lines. The two-stage bandpass filter is designed and fabricated with a ring-resonator and input/output interdigital coupled line. A fabricated filter shows dual-mode, rejection of whole ultra wide band, sharp skirt characteristics and has ring area reduced by 60 % compared to the conventional ring-resonator bandpass filter.

• Proceedings of the KAIS Fall Conference
• /
• 2006.05a
• /
• pp.381-383
• /
• 2006

본 논문에서는 5.8Ghz ISM대역 평행 결합선로 대역통과 여파기를 설계 제작하였다. 긴본적인 설계는 저역통과 여파기에서 대역통과 여파기로 변환한 후, 직 병렬 공진기를 이용한 설계와 J-인버터를 이용해 평행 결합선로 대역통과 여파기를 구현하였다. 2개의 공진 주파수를 실제로 구현하기 어렵기 때문에 하나의 공진기만을 사용하기 위해 인버터를 사용하였다. 또한 실제적인 마이크로스트립 라인의 layout크기를 결정하기 위해 우수 기수 모드 임피던스를 해석하고 근사식을 통해 스트립라인의 치수를 결정하였다. 이런 과정을 토대로 5.8GHz ISM밴드용 평행 결합선로 대역통과 여파기를 설계, 제작하였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.8
• /
• pp.47-52
• /
• 2008

In order to enhance the rejection performance of the UWB bandpass filter based on the Composite Right- and Left-Handed Transmission-line(CRLH-TL) Metamaterial cell, we propose the lowpass filtering concept that fits into the design objectives : Keeping metamaterial property and miniaturization. So the bandpass filter itself is made far less than a quarter-wavelength and a pair of symmetric comprises lowpass filtering blocks are placed before and after the center CRLH filter which comprises tile interdigitated coupled lines and short-circuited stob. The design result will show the size of 'guided wavelength/8', the fractional bandwidth over 100%, the insertion loss much less than 1 dB, a flat Group-Delay and a good return loss performance, as expected.