• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.11
• /
• pp.107-113
• /
• 2014

A VCO (Voltage Controlled Oscillator) and a divide-by-4 high speed frequency divider are implemented using 65nm CMOS technology for 60GHz wireless communication system. The mm-wave VCO was designed by NMOS cross-coupled LC type using current source. The architecture of the divide-by-4 high speed frequency divider is differential ILFD (Injection Locking Frequency Divider) with varactor to control frequency range. The frequency divider also uses current sources to get good phase noise characteristics. The measured results show that the VCO has 64.36~67.68GHz tuning range and the frequency divider divides the VCO output by 4 exactly. The high output power of 5.47~5.97dBm from the frequency divider is measured. The phase noise of the VCO including the frequency divider are -77.17dBc/Hz at 1MHz and -110.83dBc/Hz at 10MHz offset frequency. The power consumption including VCO is 38.4mW with 1.2V supply voltage.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.8
• /
• pp.51-57
• /
• 2004

We have analyzed the effect of out-band dispersion in the cascaded fiber Bragg Elating(FBG) based optical add-drop multiplexers(OADM) when bypassed wavelengths contain SCM signals. In order to compute this impairment the dispersion characteristics of FBG have been analytically calculated by solving their coupled wave equations, and the Fourier method is applied to IMD analysis. The out-band dispersion effects over WDM/SCM signals are analyzed under different and common system situations as: ITU channel spacing(100, 50, 25 GHz), channel density parameter, frequency extension of the SCM plan, modulation characteristics, FBG length, etc. From this results, the transport of WDM/SCM signals in future DWDM transport networks could be limited by this effect which has to be taken into account for designing future networks.

• 한국지구물리탐사학회:학술대회논문집
• /
• 1999.08a
• /
• pp.37-47
• /
• 1999

Among the geophysical exploration methods, electromagnetic (EM) survey must have the broadest range of instrumental systems and remarkable range of applications. There is a plethora of available techniques and instruments, and the depth of investigation and resolution are highly dependent on the particular systems used according to their operating frequency and source-receiver configuration. This diversity of EM systems, however, provides a wide range of instruments or methodologies to choose in order to select the most appropriate tool for the task in hand. This rather than being a disadvantage, would be a major strength of EM methods. Modern EM equipments are remarkably portable, considering their sophistication. Coupled with major advances in recent computer technology, accurate modeling and interpretation techniques are on the way of continuous development and upgrade which, in turn, make the EM methods to become much more heavily used, especially for engineering and environmental applications. We aim to provide a brief theoretical principles, survey techniques and case histories of some selected EM methods that can be applied to geotechnical and environmental problems in Korea.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.2
• /
• pp.115-119
• /
• 2011

A tip-type carbon nanotube(CNT)-based field emitter was studied to consider it as electron source for micro-focused x-ray tube. The CNT was grown directly on a metal (tungsten) substrate by using an inductively coupled plasma-chemical vapor deposition (ICP-CVD) method. Prior to CNT growth, the metal substrate was etched to have various tip angles from $10^{\circ}$ to $180^{\circ}C$ (flat-type). The morphologies and microstructures of all the grown CNTs were analyzed via field-emission SEM. Furthermore, the effects of substrate tip-angles on the emission properties of CNT-based field emitters were characterized to estimate the maximum current density, the turn-on voltage, and the spatial distribution of electron beams. Prolonged long-term stability testing of the CNT emitters was also performed. All the experiment results obtained from this study indicated why a tip-type CNT emitter, compared with a flat-type CNT emitter, would be more desirable for a micro-focused x-ray system, in terms of the emission current level, the focused beam area, and the emission stability.

• Water for future
• /
• v.23 no.3
• /
• pp.319-328
• /
• 1990

The Parameter Identification of 2-demensional estuarine model was carried out using new output ADI-FDM numerical semi-implicit schem transformed in boundary fitted(BF) - coordinate. The hydrodynamic equations which is coupled with the transport equations were used as basic equations in the model. Thompson's equations were used to transform governing equations into rectangular plane equations and his elliptic grid generation scheme was used to generate curvilinear grid system. in BF - coordinates. The parameters to be identified are friction coefficient and disperse coefficient embedded in the governing equations. The numerical output scheme is tidally averaged salinity model in BF - coordinates. The algorithm to optimize norm of error between observations and calculations is the influence coefficinet algorithm associated with least square criterion. The lumped model is conssidered in identification. This paper was concetrated on checking whether the new output scheme might be useful to identify parameters in estuarine salinity model or not. The proposed method was tested through experimental application with hypothetical simple model. The result of the test shows that the proposed method can be used for parameter identification in estuarine model.

• YAKHAK HOEJI
• /
• v.47 no.6
• /
• pp.410-416
• /
• 2003

Autotaxin(ATX) was originally purified from conditioned media of A2058 human melanoma cells and shown to be a potent cell motility-stimulating factor, possessing a type II nucleotide pyrophosphatase/phosphodiesterase (NPP2) activity. Recombinant ATX has recently demonstrated that human plasma lysophosholipase D is identical to ATX and uses lysophosphatidylcholine as a substrate to mediate various biological functions including tumor cell growth and motility through G-protein coupled receptor. However, despite pivotal roles of ATX on physiological or pathophysiological states, the production of ATX is solely depends on complicated purification method which employs multiple column steps, but resulted in very poor yield. This limited the use of ATX for extensive analysis. We, therefore, expressed six histidine-tagged recombinant human ATX(His-ATX) in High Five TM insect cells to improve the generation of ATX and to make simple the purification of ATX. The signal sequence of the human ATX gene was truncated and replaced with sequence of insect cell secretion signal within expression vector. In addition, codons for six histidines were added to the C-termini of 120kDa ATX cDNA construct. A simple purification scheme utilizing two-step affinity column chromatography was designed to purify His-ATX to homogeneity from the culture supernatant of transfected insect cells. Homogenous His-ATX was detected and isolated from the concentrated insect cell medium using concanavalin A agarose and nickel affinity chromatography. Purified His-ATX was in full length with ATX capacity. A combination of this expression system and purification scheme would be useful for production and purification of high-quality functional ATX for research and practical application of multiple functional motogen, ATX/NPP-2.

• Journal of the Mineralogical Society of Korea
• /
• v.11 no.1
• /
• pp.20-31
• /
• 1998

Adsorption of metal elements onto illite and halloysite was investigated at $25^{\circ}C$ using pollutant water collected from the gold-bearing metal mine. Incipient solution of pH 3.19 was reacted with clay minerals as a function of time: 10 minute, 30 minute, 1 hour, 12 hour, 24 hour, 1 day, 2 day, 1 week, and 2 week. Twenty-seven cations and six anions from solutions were analyzed by AAs (atomic absorption spectrometer), ICP(induced-coupled plasma), and IC (ion chromatography). Speciation and saturation index of solutions were calculated by WATEQ4F and MINTEQA2 codes, indicating that most of metal ions exist as free ions and that there is little difference in chemical species and relative abundances between initial solution and reacted solutions. The adsorption results showed that the adsorption extent of elements varies depending on mineral types and reaction time. As for illite, adsorption after 1 hour-reaction occurs in the order of As>Pb>Ge>Li>Co, Pb, Cr, Ba>Cs for trace elements and Fe>K>Na>Mn>Al>Ca>Si for major elements, respectively. As for halloysite, adsorption after 1 hour-reaction occurs in the order of Cu>Pb>Li>Ge>Cr>Zn>As>Ba>Ti>Cd>Co for trace elements and Fe>K>Mn>Ca>Al>Na>Si for major elements, respectively. After 2 week-reaction, the adsorption occurs in the order of Cu>As>Zn>Li>Ge>Co>Ti>Ba>Ni>Pb>Cr>Cd>Se for trace elements and Fe>K>Mn>Al, Mg>Ca>Na, Si for major elements, respectively. No significant adsorption as well as selectivity was found for anions. Although halloysite has a 1:1 layer structure, its capacity of adsorption is greater than that of illite with 2:1 structure, probably due to its peculiar mineralogical characteristics. According to FTIR (Fourier transform infrared spectroscopy) results, there was no shift in the OH-stretching bond for illite, but the ν1 bond at 3695 cm-1 for halloysite was found to be stronger. In the viewpoint of adsorption, illite is characterized by an inner-sphere complex, whereas halloysite by an outer-sphere complex, respectively. Initial ion activity and dissociation constant of metal elements are regarded as the main factors that control the adsorption behaviors in a natural system containing multicomponents at the acidic condition.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.10
• /
• pp.959-965
• /
• 2014

This paper summarizes the previous research results of fundamental investigation done in SNU on the wireless power transfer. Firstly, the physical limitation of a wireless power transfer using the spherical modes is reviewed. It is found that wireless power transfer depends only on the radiation efficiency of the antennas and the distance between two antennas involved. Secondly, we review the characteristics of WPTS with different sources and compare the performance differences of WPTS according to the source type. In addition, the method for efficient WPTS is suggested when the distance between antennas is varied. Finally, by using the time domain solution of the coupled mode equation, we present an analytic formula which can be used to differentiate Inductive Coupling(IC) and Magnetic Resonance Coupling(MAC) which are often used ambiguously in wireless power transfer system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.1
• /
• pp.1-7
• /
• 2012

In this paper, An X-band solid state power amplifier(SSPA) for pulse compressed microwave signal with 60Watt power and power added efficiency(PAE) above 30% is described. Designed 60Watt high power amplifier(HPA) was implemented by cascade coupled amplifiers, and it is consisted on three stage drive amplifiers with internally matched GaAs FET and one stage main power amplifier with an internally matched GaN HEMT. The designed SSPA has performance with more than total power gain 37dB and output power 48dBm(60-W) in condition of frequency range $9.41{\pm}0.03GHz$, pulse period width under 1ms and duty cycle under 10%. The implemented SSPA can apply to high quality digital marine radar applications with pulse compression technique.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.5
• /
• pp.829-837
• /
• 1992

This paper presents a new approach for the analysis of hot strip rolling processes. The approach is based on the finite element method and capable of predicting velocity field in the strip, temperature field in the strip, temperature field in the roll, and roll pressure. Basic finite element formulations for heat transfer analysis are described with emphasis on the treatment of numerical instability resulting from a standard Galerkin formulation. Comparison with the theoretical solutions found in the literature is made for the evaluation of the accuracy of the temperature solutions. An iterative scheme is developed for dealing with strong correlations between the metal flow characteristics and the thermal behavior of the roll-strip system. A series of process simulations are carried out to investigate the effect of various process parameters including interface friction, interface heat transfer coefficient, roll speed, reduction in thickness, and spray zone. The results are shown and discussed.