• Nuclear Engineering and Technology
• /
• 제45권1호
• /
• pp.13-20
• /
• 2013

This paper looks at the Fukushima disaster from the perspective of resilience engineering, which replaces a search for causes with an understanding of how the system failed in its performance. Referring to the four resilience abilities of responding, monitoring, learning, and anticipating, the paper focuses on how inadequate engineering anticipation or risk assessment during the design, in combination with inadequate response capabilities, precipitated the disaster. One lesson is that systems such as nuclear power plants are complicated, not only in how they function during everyday or exceptional conditions, but also during their whole life cycle. System functions are intrinsically coupled synchronically and diachronically in ways that may affect the ability to respond to extreme conditions.

• 한국전산구조공학회논문집
• /
• 제13권4호
• /
• pp.427-436
• /
• 2000

이 논문은 불규칙 가진력을 받는 회전-고정보의 비선형 응답특성을 나타낸다. 불규칙 가진력은 두 번째 고유모드의 절점과 최대변위점에 가했다. 비선형 편미분 방정식과 경계조건으로 표현되는 이 문제를 Galerkin의 방법을 이용하여 연립 비선형 상미분방정식으로 변환하였다. 이 상미분방정식으로부터 Fokker-Planck방정식과 모멘트 방정식을 얻은 후 Gaussian closure 방법 및 non-Gaussian closure 방법을 이용하여 3 모드 근사시 각각 27개 및 209개의 자율 상미분방정식을 구하였다. Gaussian closure 방법과 non-Gaussian closure 방법으로 2 모드 및 3 모드 근사해석을 수행하였고 해석적 결과들은 Monte Carlo 시뮬레이션 결과와 비교되었다. 해석결과 2 모드 근사해와 3 모드 근사해가 거의 일치하였고 2 모드 내부공진만 고려하여도 해석결과에 별 영향을 주지 않는다는 것을 알 수 있다.

• Journal of Power Electronics
• /
• 제5권3호
• /
• pp.198-205
• /
• 2005

The mechanical system of a drive can often be modeled as a two- or three-mass-system. The load is coupled to the driving motor by a shaft able to perform torsion oscillations. For the automatic tuning of the control, it is necessary to know the mathematical description of the system and the corresponding parameters. As the manpower and setup-time necessary during the commissioning of electrical drives are major cost factors, the development of self-operating identification strategies is a task worth pursuing. This paper presents an identification method which can be utilized for the assisted commissioning of electrical drives. The shaft assembly can be approximated as a two-mass non-rigid mechanical system with four parameters that have to be identified. The mathematical background for an identification procedure is developed and some important implementation issues are addressed. In order to avoid the excitation of the system with its natural resonance frequency, the frequency response can be obtained by exciting the system with a Pseudo Random Binary Signal (PRBS) and using the cross correlation function (CCF) and the auto correlation function (ACF). The reference torque is used as stimulation and the response is the mechanical speed. To determine the parameters, especially in advanced control schemes, a numerical algorithm with excellent convergence characteristics has also been used that can be implemented together with the proposed measurement procedure in order to assist the drive commissioning or to achieve an automatic setting of the control parameters. Simulations and experiments validate the efficiency and reliability of the identification procedure.

• 한국광학회지
• /
• 제16권3호
• /
• pp.266-274
• /
• 2005

본 논문에서는 2차원 광결정 공진기의 결합을 통해 WDM시스템에 적합한 특성을 가지는 공진 필터를 설계하였다. 공진기간의 결합에 있어서 고려해야 할 요소를 시영역에서의 모드 결합이론(coupling modes in time)을 적용하여 이론적으로 분석하였으며, 전자회로 등가화를 이용하여 쉽게 그 요소를 결정할 수 있음을 보였다. 공진기 결합에 있어서 공진기 간의 간격에 따른 위상천이에 대해서 외부감쇄에 의한 Q-factor를 조정함으로써 보상할 수 있음을 확인하였고, 2차원 광결정 점결함 공진기를 이용하여 500GHz의 대역폭을 가지며 통과대역에서 0.5 dB 리플을 가지는 3차 Chebyshev 대역 통과 필터를 설계하였다.

• 한국전산구조공학회논문집
• /
• 제24권4호
• /
• pp.457-462
• /
• 2011

본 논문은 지진응답을 제어하기 위해 다층 건물에 설치된 마찰감쇠기의 간단한 설계절차를 제안하였다. 마찰감쇠기는 비선형성이 강하므로 마찰감쇠기가 설치된 건물의 제어효과를 파악하는 것은 어렵다. 마찰감쇠기의 제어력은 층간속도에 영향을 받으므로, 인접한 모드가 서로 연계된다. 따라서 응답은 공진일 때 안정상태응답으로 가정하여 유도하였다. 첫째로 지진하중에 대한 정해응답을 구하는 것은 불가능하므로 조화가진을 받을 때의 근사해를 유도하였다. 둘째, 다층 건물을 단자유도로 변환하기 위해서 모드해석이 수행되었다. 셋째, 근사해를 이용하여 등가감쇠비를 유도하였다. 그리고 등가감쇠비를 이용하여 응답감소계수를 제안하였다. 마지막으로, 마찰감쇠기의 마찰력을 응답감소계수에 의해 설계하고 설계된 감쇠기를 7개의 지진파를 통해 검증하였다. 비선형해석 결과가 제안된 절차의 유효성을 확인하였다.

• 생명과학회지
• /
• 제13권1호
• /
• pp.99-104
• /
• 2003

Aromatic compounds are of major concern among environmental pollutants due to their toxicity and persistence. To monitor aromatic compounds in a real time with a better sensitivity, a new method of SPR (surface plasmon resonance) based on DNA chip (Biacore 3000) was developed here. It is thought that CapR regulatory protein as a complex with phenol, could bind to their corresponding promoter, Po. Biotinylated DNA oligomers for the promoter was synthesized by PCR and coupled onto streptoavidin-linked CM5-chip. CapR regulatory proteins were purified after cloning their genes in pET21a (+) vector and expressing proteins. The interaction was assessed by the system where the regulatory proteins flowed with or without phenol through the cells of DNA chip. CapR regulatory protein even in the presence of phenol had no response to its promoter, Po, suggesting that other factor(s) might be required for the activation of Po promoter. The present work reveals a promising possibility of the SPR-based DNA chip in monitoring specific environmental pollutants in a real time.

• 동력기계공학회지
• /
• 제9권4호
• /
• pp.71-76
• /
• 2005

Marine structures are often in contact with inner or outer fluid as stern, ballast and oil tanks. The effect of interaction between fluid and structure has to be taken into consideration when we estimate the dynamic response of the structure appropriately. Fatigue damages can also be sometimes observed in these tanks which seem to be caused by resonance. Thin walled tank structures in ships which are in contact with water and located near engine or propeller where vibration characteristics are strongly affected by the added mass of containing water. Therefore it is essentially important to estimate the added mass effect to predict vibration characteristics of tank structures. But it is difficult to estimate exactly the magnitude of the added mass because this is a fluid-structure interaction problem and is affected by the free surface, vibration modes of structural panels and the depth of water. I have developed a numerical tool of vibration analysis of 3-dimensional tank structure using finite elements for plates and boundary elements for fluid region. In the present study, the effect of added mass of containing water, the effect of structural constraint between panels on the vibration characteristics are investigated numerically and discussed. Especially a natural frequencies by the fluid interaction between 2 panels and a breath mode of the water tank are focused on.

• 한국정밀공학회지
• /
• 제33권8호
• /
• pp.617-622
• /
• 2016

The article describes the determination of the dynamic stability for an observation antenna, considering the rotational speed by the payload driving motor. A finite element model of the observation antenna was made using the solid and beam elements. The connecting parts between the solid and the beam was adequately coupled. The boundary conditions were made by restriction of the degree of freedoms in the supporting points. With the comparison between the modal analysis results and the rotating speed of the payload driving motor, no resonance for the structure of antenna was identified and first natural frequency was determined under 33 Hz (Seismic Cut-Off Frequency). Therefore, the dynamic stability of the antenna was confirmed by the comparism between the seismic safety criterion and the stress results of the dynamic analysis applied the loading conditions and required response spectrum (RRS).

• Coupled systems mechanics
• /
• 제6권3호
• /
• pp.287-316
• /
• 2017

This paper studies the particularities of the forced vibration of the hydro-elastic system consisting of a moving elastic plate, compressible viscous fluid and rigid wall. This study is made by employing the discrete-analytical solution method proposed in the paper by the authors (Akbarov and Panakhli (2015)). It is assumed that in the initial state the fluid flow is caused by the axial movement of the plate and the additional lineally-located time-harmonic forces act on the plate and these forces cause additional flow field in the fluid and a stress-strain state in the plate. The stress-strain state in the plate is described by utilizing the exact equations and relations of the linear elastodynamics. However, the additional fluid flow field is described with linearized Navier-Stokes equations for a compressible viscous fluid. Numerical results related to the influence of the problem parameters on the frequency response of the normal stress acting on the plate fluid interface plane and fluid flow velocity on this plane are presented and discussed. In this discussion, attention is focused on the influence of the initial plate axial moving velocity on these responses. At the same, it is established that as a result of the plate moving a resonance type of phenomenon can take place under forced vibration of the system. Moreover, numerical results regarding the influence of the fluid compressibility on these responses are also presented and discussed.

• 한국응용곤충학회지
• /
• 제53권1호
• /
• pp.7-13
• /
• 2014

본 연구에서는 목화진딧물(Aphis gossypii)을 접종한 착색단고추(Capsicum annuum L.)에서 방출된 휘발성물질 및 칠성풀잠자리(Chrysopa cognata) 암컷이 분비한 휘발성물질에 대한 칠성풀잠자리 수컷의 반응이 조사되었다. Y-tube olfactometer에서 칠성풀잠자리 수컷 성충은 목화진딧물이 감염되어 있는 착색단고추에 더 많이 이끌렸고, 수 개의 뚜렷한 GC-EAD 반응을 보였다. 이들 GC-EAD 반응을 보인 피크에 대해 GC-MS 및 GC coupled NMR spectroscopy로 분석한 결과, 목화진딧물이 감염된 착색단고추로부터 4-ethylacetophenone, 3-ethylbenzaldehyde, 3-ethylacetophenone 및 4-ethylbenzaldehyde 그리고 칠성풀잠자리 암컷 성충으로부터 (Z,Z)-4,7-tridecadiene, (Z)-4-tridecene 및 (Z)-4-undecene 등이 동정되었다. 야외 포장시험에서 이들 물질 단독으로는 칠성풀잠자리에 대해 유인효과가 없었다. 암컷 성충에서 기원한 (Z)-4-tridecene와 (Z)-4-undecene은 칠성풀잠자리를 유인하지 못하였고, (Z,Z)-4,7-tridecadiene은 nepetalactol의 유인성을 감소시켰다. 하지만 3-ethylbenzaldehyde와 4-ethylacetophenone는 nepetalactol과 함께 혼합하면 칠성풀잠자리에 대한 유인성은 현저하게 증가하였다.