• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.3
• /
• pp.273-278
• /
• 2007

Modern society has moved from a phosphorus recycling loop, where animal manure and human wastes were spread on farming land to recycle nutrients, to a once-through system, where phosphates are extracted from mined, non-renewable phosphate rock and end up either in landfill(sewage sludge, incinerator ash) or in surface waters. In this research, crystallization of nitrogen and phosphate with natural sources of $Mg^{2+}$ in synthetic water was tested. The operational parameters of pH, mixing time, and the magnesium molar ratio were investigated to find optimal conditions of the MAP precipitation using synthetic wastewater. The removal efficiency of phosphate increased with pH up to 11. By MAP precipitaiton of the synthetic waste water, 94% of the phosphate were eliminated at pH 11. It was found that at least 10 minutes mixing time was required and 20 minutes mixing time was recommended for efficient phosphate removal. High efficiency removal of phosphate was possible when the magnesium molar ratio was 1.0~2.0. The comparative study of different magnesium sources showed that coagulants (PAC) was the more efficient sources than only magnesium. The result showed that 97% of phosphate removal. In conclusion, coagulants (PAC) induced crystallization of struvite and hydroxyapatite was shown to be a technically viable process that could prove cost effective for removing phosphate in wastewater.

• Korean Management Science Review
• /
• v.12 no.2
• /
• pp.77-87
• /
• 1995

In this paper we develop an efficient heuristic algorithm for the problem of scheduling n sequence-dependent jobs on a basic processor to minimize makespan. Efficient solution methods are already known for the sequence- independent case. But for the sequence-dependent case, this problem belongs to a set of strong NP-complete problems. We present a heuristic which is similar to shortest setup time heuristic but opportunity cost of setup time rather than shortest setup time is used for choosing next job. This heuristic algorithm has same computational complexity and worst case ratio as the shortest setup time heuristic. We used Wilcoxon signed rank test to show that our heuristic is superior to nearest setup time heuristic in term of average behavior.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.826-828
• /
• 2015

In this paper, Propose an efficient method that can operate at fixed stations Beam-Steering. Typical Beam-Forming techniques are performed using a delay time between the signal reaching each antenna array. The Beam-Forming method requires a lot of complexity and cost. This paper suggest a Beam-Steering method using a signal-to-noise ratio and a received signal strength. Analyzes the algorithm about proposed method.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.3
• /
• pp.175-186
• /
• 2004

The compatibility of the enterprises of Korea was the 'low cost and mass production＆apos;. That in because, the entire business transactions including production, accounting, personnel management, and logistics need to be integrated with a global perspective. Logistics information system is to support the management of such logistics activities and involves in a wide range of the business operations. In other words, the logistics information system is 0 accurately and rapidly deliver and process the information available for the logistics in order to promote more smoother and efficient logistics by using such information. I'll give a brief introduction to the SRM(Supplier Relationship Management) system and go into the problem that should be considered and which phase to emphasize when building this system.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.4
• /
• pp.1-15
• /
• 2003

Recently, urban information system(UIS) has been developed and utilized by local governments in Korea and has become a key means of urban informatization of local governments. When UIS is conducted only for FM oriented internal utilization regardless of its cost-efficiency, however, its cost-benefit structure could be distorted seriously. The study utilizes benefit cost analysis technique and applied the technique to a model case of Chungju UIS selected by National GIS team. Chungju City developed its GIS for the management of roads and urban planning in 1993. At its beginning, the system was an efficient model with relatively strong cost-benefit structure and could produce positive net benefit 10 years' after its construction. When the city began to develop its facility management with the financial assistance from central government in 1998, however, its cost-benefit structure became distorted. As a result, it is delayed for the UIS to produce positive net benefit until the year of 2015. Using benefit cost ratio, discount rate and Mobile GIS, the study also conducts a sensitivity analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.698-705
• /
• 2016

The purpose of this study is to analyze the impact which the plan characteristics of Residential Land Development Projects have on land price changes in the project district and to derive policy implications for the efficient promotion of these projects. For this purpose, we analyzed the promotion land price change progress of Residential Land Development Projects step-by-step. After theoretical consideration and a review of the references, 16 plan characteristics of Residential Land Development Projects affecting land price changes were selected ((1) The rate of land price change, (2) Business area, (3) Residential land ratio, (4) Commercial land ratio, (5) Semi-residential land ratio, (6) Neighborhood facilities land ratio, (7) Apartment house ratio, (8) Street ratio, (9) Park & green ratio, (10) Ratio of land for schools, (11) Site development cost for $1m^2$, (12) General residential area ratio, (13) Semi-residential area ratio, (14) Commercial area ratio, (15) Semi-Industrial area ratio, and Natural green area ratio). We used SPSS Version 20.0 to analyze the impact of the 16 selected plan characteristics on the land price changes. As a result, it was found that the land price began to rise two years (before/after?) the appointment of the district and became stabilized after the completion of the project. The plan characteristics that affect the land price changes were found to be the (2) Business area, (4) Commercial land ratio, (6) Neighborhood facilities land ratio, (8) Street ratio, (11) Site development cost for $1m^2$, and (12) General residential area ratio.

• Convergence Security Journal
• /
• v.13 no.3
• /
• pp.9-15
• /
• 2013

Calculating of matching cost is an important for efficient stereo matching. To investigate the performance of matching process, the concepts of the existing methods are introduced. Also we analyze the performance and merits of them. The simplest matching costs assume constant intensities at matching image locations. We consider matching cost functions which can be distinguished between pixel-based and window-based approaches. The Pixel-based approach includes absolute differences (AD) and sampling-intensitive absolute differences (BT). The window-based approach includes the sum of the absolute differences, the sum of squared differences, the normalized cross-correlation, zero-mean normalized cross-correlation, census transform, and the absolute differences census transform (AD-Census). We evaluate matching cost functions in terms of accuracy and time complexity. In terms of the accuracy, AD-Census method shows the lowest matching error ratio (the best solution). The ZNCC method shows the lowest matching error ratio in non-occlusion and all evaluation part. But it performs high matching error ratio at the discontinuities evaluation part due to blurring effect in the boundary. The pixel-based AD method shows a low complexity in terms of time complexity.

• Journal of Convergence for Information Technology
• /
• v.12 no.2
• /
• pp.184-191
• /
• 2022

This study aims to provide basic information necessary to find an efficient management plan for patients using auto insurance. The analysis was conducted on the five-year auto insurance medical expenses review data registered in the health care bigdata Hub from 2016 to 2020. As a result of the analysis, the number one composition ratio of auto insurance inpatient treatment expenses was treatment and surgery fees for Certified tertiary hospitals, hospitalization fees for general hospitals, hospitals and clinics, and treatment and surgery fees for oriental medical institutions and dental hospitals. outpatient treatment expenses was doctor's fee for medical institution, treatment and surgery fees for oriental medical institutions and dental hospitals. The ratio of medication, anesthesia, and special equipment significantly affected the cost of inpatient. And the ratio of physical therapy significantly affected the cost of outpatient.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.397-400
• /
• 1999

As the result of enhancement of CAD, Design Automation and manufacturing technology, it's on the increasing complexity, integration ratio, data signals, and pin count to IC chips. This brings about difficulties of testing, and incresing test time. Now One of the most cost-consuming procedure as integration ratio increases is the testing step. In this paper, we propose a new method, “Efficient TP(test point) assignment algorithm” using “input grouping”, This is helpful method to reducing test length without losing fault coverage. Experimental results show that proposed method reduces test length remarkably and doesn't miss fault coverage, with low hardware overhead Increasing.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.19-21
• /
• 2007

In recent, a great number of electric motor units (EMUs) have been disused in Korea according as its legal duration is 25 years. Generally, the disused EMUs are disposed by selling original form or scrapping for junk. Until now, any efficient disposal system for disused EMUs has not existed. The purpose of this study was to develop the recycling process for the FRP used as an interior panel of EMU. This process was to manufacture a product mixing binders, fillers and the powdered FRP. The characteristics of a product were changed with the mixing ratio of the powdered FRP. The optimal ratio of the powdered FRP was from 10 % to 15 % (w/w). In the future, the application of this process can enhance the efficiency of resource recycling and decrease the cost of waste treatment in the EMU industry.