• 한국분말재료학회지
• /
• 제7권2호
• /
• pp.102-109
• /
• 2000

With the emergence of the 3D CAD, it is possible to create a physical part directly from a digital model by accumulating layers of a given material. The technology is being widely used for checking designs, to create master models for rapid tooling, and for reverse engineering. However, in general, a model created by rapid prototyping technology is made of soft material that cannot be used as mass prouduction hard tool. Newly developed powder casting is suitable for rapid-manufacturing metallic tools. Powder casting can serve as a promising rapid tooling method because of high density characteristics and low dimensional shrinkage below 0.1% during sintering and infiltration. Through this process, we have realized significant time and cost savings eliminating the expense of conventional prototype tooling process.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2010년 춘계학술발표회 논문집
• /
• pp.263-266
• /
• 2010

The research design of the road for the LiDAR survey data was available, LiDAR data currently exists for this area Daejeon, Gongju area two map sheet selected of the LiDAR data and figures were produced using the DEM, respectively. The scale 1 / 5, 000 of figures produced by using the DEM and LiDAR DEM data comparing the results produced by the difference in some areas or That could be found. The accuracy of LiDAR data in the road design to use more accurate information on terrain, roads and construction of the linear installation cost savings Contribution will be considered.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.692-696
• /
• 2005

In an attempt to fabricate all inclusive display systems we are presenting a study on several elements that would be used as building blocks for all-on-board integrated applications on stainless steel foils. These systems would include in the same substrate all or many of the components needed to drive a flat panel OLED display. We are reporting results on both digital and analog circuits on stainless steel foils. Shift registers running at speeds greater than 1.0MHz are shown as well as oscillators operating at over 40MHz. Pixel circuits for driving organic light emitting diodes are presented. The device technology of choice is that based on poly-silicon TFT technology as it has the potential of producing circuits with good performance and considerable cost savings over the established processes on quartz or glass substrates (amorphous Silicon a-Si:H or silicon on Insulator SOI).

• 아태비즈니스연구
• /
• 제5권1호
• /
• pp.1-11
• /
• 2014

The study provides new empirical evidence on the level of profit efficiency and returns to scale of the Bangladesh banking sector. We employ the Slack-Based Data Envelopment Analysis (SBM-DEA) method to assess the level of profit efficiency of individual banks over the years 2004 to 2011. The empirical findings indicate that the Bangladesh banking sector has exhibited the highest and lowest level of profit efficiency during years 2004 and 2011 respectively. We find that only eight banks have been profit efficient throughout the period under study. The empirical findings seem to suggest that most of the Bangladesh banks have been experiencing economies of scale due to being at less than the optimum size, or diseconomies of scale due to being at more than the optimum size. Thus, decreasing or increasing the scale of production could result in cost savings or efficiencies.

• 대한안전경영과학회지
• /
• 제16권4호
• /
• pp.417-426
• /
• 2014

Plant management have a greatest influence on the corporate variety of tasks such as production, quality, environment. So, various performance indices for plant management are operating. But plant management tasks can be carried out effectively, so that all of how to organize and efficiently manage indicators is lacking real condition In this paper, improved profitability, cost savings by applying the concept for the performance assessment, plant management services, such as the key indices for performance according to the objectives of the firm. Dashboard for plant management work using me to develop a system that manage.

• Journal of Ship and Ocean Technology
• /
• 제8권4호
• /
• pp.45-55
• /
• 2004

How to achieve engineering collaboration among diverse engineering activities is one of the key topics in manufacturing fields nowadays. The infrastructure for collaborative engineering is essential, and it can be realized by information technologies and intelligent engineering applications in digital environments. Digital Manufacturing is a technology to facilitate effective product developments and agile productions by computer models representing the physical and logical schema and the behavior of real manufacturing systems including products, processes and factories. A digital factory as a well-designed and integrated digital environment is incorporated in it. In this paper, digital manufacturing is recommended as a good strategy for collaborative engineering, especially in product developments and productions. By business process analysis and some case studies, we suggested sophisticated digital models are very useful to concurrent and collaborative engineering. It is expected that digital manufacturing is a very good strategy for achieving dramatic time and cost savings in many engineering activities of many manufacturing industries, including machinery, automotive and shipbuilding.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1851-1858
• /
• 2009

As the ticket issuing methods have been diversified for the convenience of the passengers such as ticketless service(SMS ticket, e-ticket, home ticket), automatic ticket issuing machine and consignment ticket sale, maintaining the current number of ticket booth has been becoming a issue. This study is designed to simulation for the optimum number of ticket booth and which can affect an efficient operation of train station and improvement of customer convenience. This study is proceeding and will contribute to minimize customer waiting time at the ticket booth. In addition, presenting the optimum number of booth is expected to have an effect on the increase of productivity and cost savings.

• 한국기계연구소 소보
• /
• 통권19호
• /
• pp.171-180
• /
• 1989

The automation of textile machinery in the fabric manufacture is strongly demanded in order to improve the industrial structure related to labour-force and cost curtailment, in addition, to keep step with the various and small production system and the consumption tendency requesting a high quality fabrics. In this thesis, the technology applying the computer to an air jet loom and characteristics obtained from it are derived. To efficently apply an automized and unmanned textile machinery, an air jet loom is equipped with the let-off, take-up and weft insertion device attached a central processing unit(CPU) which can automatically operate according to a program. As a result, an air jet loom is available for the factory automation, which has advantages including productivity promotion, high quality security, energy savings, specification & variety, efficient production control, in fabric manufacturing process.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.226-227
• /
• 2013

본 논문에선 유지 보수 계약 등의 원가 절감 및 고사양 HW를 제공한다. 다양한 가상화 솔루션 제공 및 발전(안정성, 고가용성)에 대해 알아본다. 통합 및 가상화 구성시 비용절감 및 효율성 극대화를 위한 표준화된 설계 방법론이 필요하다.

• 소성∙가공
• /
• 제24권1호
• /
• pp.20-27
• /
• 2015

Hot tensile tests were conducted at different temperatures ranging from $20^{\circ}C$ to $550^{\circ}C$ to evaluate the mechanical properties of Al5052 seamless tubes. Such tubes can provide the technological foundation for complex forming using hot air bulging. Hot air bulging is one of the recently developed hydroforming techniques and it has some limitations in terms of cycle times. The benefits of hot air bulging are weight and cost savings through part consolidation and reduced post-forming processes such as welding and piercing. In order to extend the forming limits of Al lightweight material hot air bulging was investigated. A heated tube was placed in a heated die and sealed at the ends by sealing cylinders. The heated tube was subsequently expanded against the die cavity wall by internal pressure using air medium. The results of the current study show that axial feeding speed and air pressure have an effect on the formability of Al tubes during air bulging at elevated temperatures.