• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.2
• /
• pp.199-208
• /
• 2019

This study reports water-resistant oil-in-water (O/W) emulsion-based sunscreening formulations prepared using a poly(ethylene glycol)-poly(${\varepsilon}$-caprolactone)-poly(ethylene glycol) (PEG-PCL-PEG) triblock polymeric surfactant. As a result of a variety of outdoor recreational activities such as swimming and hiking, consumer needs for development of advanced water-resistant sunscreen formulations are increasing. Water-resistant sunscreens are mostly based on water-in-oil (W/O) emulsions, because they should not be wiped off by water or sweat. However, the W/O emulsion formulations have a disadvantage in that the feeling of use is oily and difficult to remove. On the other hand, the O/W emulsion formulations are excellent in achieving the better skin feel as well as the easier removal. However, it is difficult to provide the O/W emulsion formulations with the water-repelling performance, since re-emulsification likely occurs upon getting touch with water. To solve this problem, this study proposes a O/W emulsion-based sunscreen formulation, a triblock polymeric surfactant having relatively high interfacial tension HLB value (~ 10). This allows the sunscreen formulations to exhibit the improved water repellence function by preventing their re-emulsification. The sunscreen formation system prepared in this study would be useful for diversification of functional sunscreen products, taking advantages of its excellent emulsion stability, UV protection performance, long lasting water-resistant function and selective cleansing effect with only foam cleanser.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.38 no.3
• /
• pp.201-207
• /
• 2012

The influence of different dilution procedures on the properties of oil-in-water (O/W) nano-emulsions obtained by dilution of oil-in-ethanol (O/E) microemulsions with water has been studied. The system water/ethanol/nonionic surfactant/silicone oil with ethanol was chosen as model system. The dilution procedures consisted of adding water (or microemulsion) stepwise. By mixing O/E microemulsions into water, nano-emulsions with droplet diameters of 30 nm were obtained. In contrast, by mixing water into O/E microemulsion, emulsions with diameter of 400 nm were obtained The dilution methods were shown to be a key factor determining the properties of the emulsions. There were no change in diameters of nanoemulsion droplets against time, however sizes of droplets in the emulsion with larger droplets were increased with time and the mechanism of unstability was thought to be Ostwald ripening.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.29 no.2 s.43
• /
• pp.181-191
• /
• 2003

This study described about method that form liquid crystal gel (LCG) by main ingredient with hydrogenated lechin (HL) in OW emulsion system. Result of stability test is as following with most suitable LCG's composition. Composition of LCG is as following. To form liquid crystal, an emulsifier used $4.0\;wt\%$ of cetostearyl alcohol (CA) by $4.0\;wt\%$ of HL as a booster, Moisturizers contained $2\;wt\%$ of glycerin and $3.0\;wt\%$ of 1.3-butylene glycol (1,3-BG). Suitable emollients used $3.0\;wt\%$ of cyclomethicone, $3.0\;wt\%$ of isononyl isononanoate (ININ), $3.0\;wt\%$ of cerpric/carprylic triglycerides (CCTG), $3.0\;wt\%$ of macademia nut oil (MNO) in liquid crystal gel formation. On optimum conditions of LCG formation, the pHs were formed all well under acidity or alkalinity conditions. Considering safety of skin, PH was the most suitable $\pm61.0$ ranges. The stable hardness of LCG formation appeared best in $32\;dyne/cm^2.$ Particle of LCG is forming size of $1{\~}20\;{\mu}m$ um range, and confirmed that the most excellent LCG is formed in $1{\~}6\;{\mu}m$ range. According to result that observe shape of LCG with optical or polarization microscope, LCG could was formed, and confirmed that is forming multi-layer lamellar type structure around the LCG. Moisturizing effect measured clinical test about 20 volunteers. As a result, moisturizing effect of LCG compares to placebo cream was increased $30.6\%$. This could predicted that polyol group is appeared the actual state because is adsorbed much to round liquid crystal droplets to multi-lamellar layer's hydrophilic group. It could predicted that polyol group is vast quantity present phase that appear mixed because is adsorbed to round liquid crystal to multi-lamellar layer's hydrophilic group. This LCG formation theory may contribute greatly in cosmetics and pharmacy industry development.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.41 no.3
• /
• pp.189-199
• /
• 2015

In this study, we have investigated the stability of sunscreens based on the solubility of organic UV absorbers in the oil and sun protection efficacy of the products composed of a combination of organic UV absorbers to develop more stable and efficient sunscreen products. Results showed that the solubility of the organic UV absorber and stability were varied depending on the type, storage conditions and concentration of oil. It was also observed from the products in the emulsion type. Various UV absorbances were determined to the products composed of the combination of organic UV absorbers. In some combinations, a synergistic effect was observed to make an increase in absorbance compared to a single component. In other cases, specific synergistic effect was displayed only when combined with the particular component. In addition, the storage condition also affected the sunscreen efficacy. In conclusion, this study confirmed that there are various factors which could affect the UV-blocking efficiency of sunscreen products.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.35 no.2
• /
• pp.91-101
• /
• 2009

in the cosmetics and medical supply field as a antioxidant material. The stable nano particle emulsion of skin toner type containing VEA was prepared. To evaluate the skin permeation, experiments on VEA permeation to the skin of the ICR outbred albino mice (12 weeks, about 50 g, female) and on differences of solubility as a function of receptor formulations was performed. The analysis of nano-emulsions containing VEA 0.07 % showed that the higher ethanol contents the larger emulsions were formed, while the higher surfactant contents the size became smaller.In this study, vitamin E acetate (VEA, tocopheryl acetate), a lipid-soluble vitamin which is widely used A certain contents of ethanol in receptor phase increased VEA solubility on the nano-emulsion. When the ethanol contents were 10.0 % and 20.0 %, the VEA solubility was higher than 5.0 % and 40.0 %, respectively. The type of surfactant in receptor solution influenced to VEA solubility. The comparison between three kind surfactants whose chemical structures and HLB values are different, showed that solubility of VEA was increased as order of sorbitan sesquioleate (Arlacel 83; HLB 3.7) > POE (10) hydrogenated castor oil (HCO-10; HLB 6.5) > sorbitan monostearate (Arlacel 60; HLB 4.7). VEA solubility was also shown to be different according to the type of antioxidant. In early time, the solubility of the sample including ascorbic acid was similar to those of other samples including other types of antioxidants. However, the solubility of the sample including ascorbic acid was 2 times higher than others after 24 h. Franz diffusion cell experiment using mouse skin was performed with four nano-emulsion samples which have different VEA contents. The emulsion of 10 wt% ethanol was shown to be the most permeable at the amount of 128.8 ${\mu}g/cm^2$. When the result of 10 % ethanol content was compared with initial input of 220.057 ${\mu}g/cm^2$, the permeated amount was 58.53 % and the permeated amount at 10 % ethanol was higher 45.0 % and 15.0 % than the other results which ethanol contents were 1.0 and 20.0 wt%, respectively. Emulsion particle size used 0.5 % surfactant (HCO-60) was 26.0 nm that is one twentieth time smaller than the size of 0.007 % surfactant (HCO-60) at the same ethanol content. Transepidermal permeation of VEA was 54.848 ${\mu}g/cm^2$ which is smaller than that of particlesize 590.7 nm. Skin permeation of nano-emulsion containing VEA and difference of VEA solubility as a function of receptor phase formulation were determined from the results. Using these results, optimal conditions of transepidermal permeation with VEA were considered to be set up.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.32 no.4 s.59
• /
• pp.233-239
• /
• 2006

This study was carried out for the evaluation of the effects of emulsion containing the specific antibodies against S. aureus that secreted staphylococcal toxins in atopy dermatitis (AD). The emulsion was formulated to have basic moisturizing effect and the function to inhibit S. aureus colonization and Staphylococcal toxins. The results were as follows; 1. In 19 subjects, 14 subjects (73.7%) showed improvement in SCORAD the mean SCORAD score was improved by 21.87% at week 4 compared to pre-application (p < 0.05). 2. In 17 subjects with severe lesions, 14 subjects(82.35%) showed improvement in SCORAD; the mean SCORAD score was improved by 25.11% at week 4 compared to pre-application (p < 0.05). 3. In 19 subjects, 15 subjects (79%) showed improvement in TEWL; the mean TEWL was improved by 24.32% at week 4 compared to pre-application (p < 0.05). 4. In 17 subjects with severe lesions, 14 subjects (82.35%) showed improvement in TEWL; the mean TEWL was improved by 25.47% at week 4 compared to pre-application (p < 0.05). 5. In 19 subjects, 15 subjects (79%) showed improvement in keratin capacitance; the mean keratin capacitance was improved by 25.01% at week 4 compared to pre-application (P < 0.05). 6. In 17 subjects with severe lesions, 13 subjects (76.47%) showed improvement in keratin capacitance; the mean keratin capacitance was improved by 20.82% at week 4 compared to pre-application (p < 0.05). Based on above-described results, emulsion containing the specific antibodies against S. aureus that secreted staphylococcal toxins is considered to be helpful in the improvement of atopic dermatitis.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.34 no.4
• /
• pp.245-258
• /
• 2008

We describe here how we can use microfluidic technologies for fabricating functional materials that could be potentially utilized in cosmetics; these include void structures, functional particulate materials, shell materials, and multi-layered colloids. We can obtain these functional materials as microfluidic approaches provide precise control over both outer dimensions and inner morphology of emulsion drops in picoliter-volume scales with high throughput. We have confirmed that this technique has a great potential to fabricate novel particles and capsules with a variety of chemical compositions as well as higher orders of layers. This microfluidic approach will allow us to develop a lot of new techniques that are useful for a variety of applications, including delivery systems, chemical separations, bio-sensing, actuators, and so on. We do believe that these new techniques will help cosmetic industry not only give rise advanced functional materials and systems but also widen its product categories.

• Journal of the Korean Society of Safety
• /
• v.7 no.3
• /
• pp.22-29
• /
• 1992

Emulsion-type cometics contain many kinds of carbon and energy source i.e., vegetable oil, mineral oil and carbohydrate etc., those can be used as nutrients and caused contamination by microbials. Thereby we have to keep cosmetics from the possibility of contamination by microbials. From this viewpoint, the purpose of this study is to get the data necessary not only to prevent dermatopathia occurred by microbials but also to sustain the quality. In this experiment, we observed how many Staphylococcus aureus were grown in the prepared cosmetics with or without antiseptics so as to prevent contamination. When the contamination proceed, the stability of phase was disturbed and creaming phenomina was happened with some discoloration and bad smell. About 40 days after, the pH was changed from 7.6 to 6.5 and the refractive index of cosmetic raw materials were changed from 1.4415 to 1.4490(water : oil=70:30). By adding antiseptics Into prepared cosmetics, the number of Staphylococcus aureus with challenge test method were decreased to 7$\times$103 cell/ml. For the antibacterial effect against Staphylococcus aureus, p-hydroxy benzoic acid propyl ester in phosphoric acid buffer solution was the best.

• Journal of Pharmaceutical Investigation
• /
• v.20 no.2
• /
• pp.55-64
• /
• 1990

Soybean fatty acid, the largest byproduct in the production of soybean oil, was formulated for hand cream, oil in water emulsion base, to improve the suppleness and elasticity of skin. The stability of emulsion observed by a macroscopic method was used as a characteristic index for deciding an optimum formula of hand creams. The optimum formula of the most stable hand cream was obtained from polynomial regression equation, contour graphs and partial derivative graphs. The values of soybean fatty acid and stearyl alcohol in the obtained optimum formula were 9.75 and 14.75 w/w%, respectively, and sodium lauryl sulfate was not needed. Experimental value for the stability of hand cream prepared according to the optimum formula was 76,14 days, and the prediction value by computation method was 73.25 days. From the results of accelerated tests by elevated temperature, the stability of hand cream by optimum formula was 1.7 year at room temperature $(25^{\circ}C)$. The hand cream containing soybean fatty acid was found to be free of primary irritant substance to the skin by Draize technique.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.3
• /
• pp.353-360
• /
• 2010

This study was carried out to investigate the possibility of solid particles as a stabilizing agent instead of surfactant for preparing emulsions in the cosmetics. The type of emulsions stabilized by solid particles was dependent on wettability of the particles for water and oil. The optimal conditions of emulsions stabilized by solid particles were determined with ratio of water and oil phase, polarity of oils and amount of stabilizers. In the foundation appling the optimal condition of emulsions stabilized by solid particles without surfactant, the stable emulsion type foundation was successfully prepared. As a result, this work indicates that emulsions stabilized by solid particles can be applied to make-up cosmetics.