• 한국안광학회지
• /
• 제18권3호
• /
• pp.291-295
• /
• 2013

Purpose: The purpose of this study was to investigate the effect of under and over refractive correction on visual acuity performance and the variation of the visual performance measurement using two different visual acuity charts. Methods: Ten young adults, aged between 19 and 25 years old, were recruited. Inclusion criteria: no history of ocular injury or pathology with a best-corrected visual acuity of 6/6 on dominant eye. The over and under refractive corrections were induced using minus and plus spherical ophthalmic lenses in 0.50 D steps up to 3.00 D; as well as using three axis orientations of cylindrical ophthalmic lenses ($45^{\circ}$, $90^{\circ}$ and $180^{\circ}$) in 0.50 D steps. The variation of visual acuity performance measurements was investigated using Bailey-Lovie LogMAR chart and Landolt C chart. Results: The visual acuity changes with lenses were significantly different between two charts [F = 49.15, p < 0.05 with plus spherical ophthalmic lenses and F = 174.38, p < 0.05 with minus spherical ophthalmic lenses]. The visual acuity changes with three different cylindrical axis showed no significant difference between Bailey-Lovie LogMAR chart [F = 2.35, p > 0.05] and Landolt C chart [F = 3.12, p = 0.05]. Conclusions: The over and under refractive correction affected the visual acuity performance differently. The Landolt C chart and Bailey-Lovie LogMAR chart demonstrated variation in measurements.

• 한국방사선학회논문지
• /
• 제12권5호
• /
• pp.557-563
• /
• 2018

동시 합성 보정 효과는 검출기의 효율이 향상할 때 그리고 선원과 검출기 사이의 거리가 가까울수록 크게 나타나는 것으로 알려져 있다. 점 선원($^{60}Co$)을 사용하여 검출기 중심축 방향 및 방사상 방향에서 거리에 따른 변화를 주어 P/T 비를 구하여 동시합성 보정을 하였다. 따라서 본 연구에서는 중심축 및 방사상 방향에서 동시합성 보정한 값들을 혼합부피선원(450 mL CRM source)에 적용하여 P/T에 따른 전체 피크효율 변화를 Geant4과 비교하였다. 또한 검출기와 시료가 아주 밀착된 상태에서 맵핑법에서 구한 효율을 환경시료 중에서 해양 시료인 미역에 적용하여 P/T 비의 적합성을 평가하고자 한다. 500 keV 이상의 효율의 영향을 받는 에너지 영역에 1,836 keV로 보정한 효율을 적용한 결과 측정값과 보정값의 상대오차는 3.2 % peak 효율이 보정되어 잘 일치하였다. 450 mL CRM source처럼 부피가 커질수록 P/T 비는 ${\pm}5%$까지 감소하였다. 이것은 검출기로부터 선원이 멀어짐에 따라 방출된 감마선의 산란이 많아지기 때문이며, 이처럼 P/T 변화는 동시합성 보정 피크 효율에 영향을 줌을 확인하였다.

• 대한치과의사협회지
• /
• 제16권4호통권107호
• /
• pp.279-282
• /
• 1978

A girl aged 16 years and I month, had a severe Angle's class III malocclusion, characterized by a retarded and constricted maxilla, anterior and posterior crossbite. This patient underwent extraction of two lower Ist premolar. After extraction, author placed multibanded system in lower dental arch to change the long axis of anterior teeth and delivered removable appliance with Coffin spring in the upper dental arch to expand dental arch. After 13 months, anterior & posterior crossbite was corrected and this patient's profile was improved. Superimposition of pretreatment and posttreatment cephalograms upon the SN line registered at S showed backward downward rotation of the mandible and retrusion of lower lip.

• 대한치과의사협회지
• /
• 제16권4호통권107호
• /
• pp.273-278
• /
• 1978

A girl aged 16 years and I month, had a severe Angle's class III malocclusion, characterized by a retarded and constricted maxilla, anterior and posterior crossbite. This patient underwent extraction of two lower Ist premolar. After extraction, author placed multibanded system in lower dental arch to change the long axis of anterior teeth and delivered removable appliance with Coffin spring in the upper dental arch to expand dental arch. After 13 months, anterior & posterior crossbite was corrected and this patient's profile was improved. Superimposition of pretreatment and posttreatment cephalograms upon the SN line registered at S showed backward downward rotation of the mandible and retrusion of lower lip.

• 제어로봇시스템학회논문지
• /
• 제8권9호
• /
• pp.812-817
• /
• 2002

This paper presents a development of high accuracy aligner and describes a method to find the orientation of a substantially circular disk shaped wafer with at least one flat region on an edge thereof. In the developed system, the wafer is spun one 360 degree turn on a chuck and the edge position is measured by a linear array to obtain a set of data points at various wafer orientation. The rotation axis may differ from wafer center by an unknown eccentricity. The flat angle is found by fitting a cosine curve to the actual data to obtain a deviation. The maximum deviation is then corrected for errors due to a finite number of data points and wafer eccentricity by calculating an adjustment angle from data points on the wafer fiat. After determining the flat angle the wafer is spun to the desired orientation. The wafer eccentricity can be calculated from four of the data points located away from the flat edge region. and the wafer is then centered.

• Journal of Astronomy and Space Sciences
• /
• 제3권1호
• /
• pp.53-66
• /
• 1986

Isophotes and surface brightness distribution were obtained for the late type normal spiral galaxy NGC 7793 (morphological type SA(s)d) which is one of the Sculptor group. The calculated total luminosity $M_{T}$ is obtained as 9.44 and the corrected face on magnitude ${B_T}^{circ}$ is 9.10. The revised distance to this galaxy $\Delta$=3.1 Mpc (de Vaucouleurs and Davoust 1980) is used for calculating the absolute magnitude ${M_T}^{circ}$ = -18.36. From the isophotes, the position angle to the major axis is $101^{circ}$, the mean axial ratio is q=b/a =0.65, and the inclination is i=50$^{circ}$. The concentric indices $C_{21}$=1069 and $C_{32}$ =1.50 are well agreed to the average value of Sd type galaxies.

• International Journal of Control, Automation, and Systems
• /
• 제6권3호
• /
• pp.386-393
• /
• 2008

A position control method for interpolating aspherical grinding and polishing tool path was reviewed and experimented in a nano precision machine. The position-base algorithm was reformed from the time-base algorithm, proposed in the previous study. The characteristics of the algorithm were in the velocity control loop with position feedback. The aspherical surface was divided by an interval at which each velocity and acceleration were calculated. The theoretical velocity was corrected by position error during processing. In the experiment, a machine was constructed and nano-scale linear encoders were installed at each axis. Relation between process parameters and the variation of position error was monitored and discussed. The best result from optimized parameters showed that the accuracy was 150nm and improved from the previous report.

• 한국정밀공학회지
• /
• 제13권1호
• /
• pp.98-107
• /
• 1996

The use of composite hyperpatch model is proposed to predict a machine tool positional error over the entire work space. This is an appropriate representation of the distorted work space. This model is valid for any configuration of 3-axis machine tool. Tool position, which is given NC data or CL data, contains error vector in actual work space. In this study, off-line compensation scheme was investigated for tool position error due to inaccuracy in machine tool structure. The error vector in actual work space is corrected by the error model using Newton-Raphson method. The proposed error compensation method shows the possibility of improving machine accuracy at a low cost.

• International Journal of Precision Engineering and Manufacturing
• /
• 제7권4호
• /
• pp.51-56
• /
• 2006

This paper proposes a control algorithm, which is verified experimentally, for aspherical surface grinding and polishing. The algorithm provides simultaneous control of the position and interpolation of an aspheric curve. The nonlinear formula for the tool position was derived from the aspheric equation and the shape of the tool. The function was partitioned at specific intervals and the control parameters were calculated at each control section. The position, acceleration, and velocity at each interval were updated during the process. A position error feedback was introduced using a rotary encoder. The feedback algorithm corrected the position error by increasing or decreasing the feed speed. In the experimental verification, a two-axis machine was controlled to track an aspherical surface using the proposed algorithm. The effects of the control and process parameters were monitored. The results demonstrated that the maximum tracking error with tuned parameters was at the submicron level for concave and convex surfaces.

• 한국안광학회지
• /
• 제15권3호
• /
• pp.213-217
• /
• 2010

목적: 토릭소프트콘택트렌즈(TSCL) 최초 착용 후 발생한 축의 정렬상태 변화를 분석하여 추적검사에 의한 피팅의 필요성을 강조하고자 하였다. 방법: 근시성 난시 87안을 대상으로 시험콘택트렌즈를 1주일 간 착용시킨 후, 틈새 등현미경을 이용하여 시험렌즈에 표시된 축 표시의 정렬상태를 관찰하여 회전된 축을 LARS법에 따라 교정하였다. 최종 교정 후 축 정렬상태를 최초 처방값과 비교하여 변화된 축의 회전율, 회전 각도, 그리고 회전방향을 처방 렌즈의 원주굴절도와 구면굴절도에 따라 나누어 분석하였다. 결과: 원주굴절력이 클수록, (-)구면굴절력이 클수록 TSCL의 축 회전율은 높았으나 회전 각도는 평균 $10^{\circ}{\sim}13^{\circ}$로 굴절력 정도에 따른 차이가 없었다. 그리고 축 회전방향은 코쪽보다 귀쪽으로 회전한 비율이 더 높았다. 결론:TSCL 착용 후 축 회전은 시력저하를 유발하므로 반드시 추적검사 결과에 따라 축 정렬 조정을 실시하여야 한다.