• Korean Chemical Engineering Research
• /
• v.47 no.3
• /
• pp.344-348
• /
• 2009

One-dimensional modeling was carried-out to predict the capacity loss of a lithium-ion polymer battery during cycling. The model not only accounted for electrochemical kinetics and ionic mass transfer in a battery cell, but also considered the parasitic reaction inducing the capacity loss. In order to validate the modeling, modeling results were compared with the measurement data of the cycling behaviors of the lithium-ion polymer batteries having nominal capacity of 5Ah from LG Chem. The cycling was performed under the protocol of the constant current discharge and the constant current and constant voltage charge. The discharge rate of 1C was used. The range of state of charge was between 1 and 0.2. The voltage was kept constant at 4.2 V until the charge current tapered to 50 mA. The retention capacity of the battery was measured with 1C and 5C discharge rates before the beginning of cycling and after every 100 cycles of cycling. The modeling results were in good agreement with the measurement data.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.29 no.4
• /
• pp.65-74
• /
• 2006

This research tried to grasp present condition of domestic corporation's society contribution activity and grope desirable direction of society contribution activity hereafter. As analysis result, establishment of the responsible department or human power in charge for society contribution activity is insufficient, and depend on contribution activity of simple donation than to administer program directly, result of contribution activity is not linked with corporation's purpose or result and practical use of network with similar organization for society contribution was proved by low. Desirable direction of domestic corporation society contribution activity is as following hereafter based on analysis result. First, corporation must put in good order inside system with an establishment of the responsible department for society contribution, security of human power in charge and introducing education program for training specialist. Second, corporation must select specific field with capacity that corporation is holding and improve result of society contribution activity as concentrated investment. Third, corporation must construct network with various similar groups and organizations including NPO/NGO and heighten consummativeness of society contribution activity through mutual interchange and cooperation.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.496-500
• /
• 2015

International construction projects are inherently more risky than domestic projects with multi-dimensional uncertainties that require complementary risk management at both the country and project levels. However, despite a growing need for systematic country evaluations, most studies have focused on project-level decisions and lack country-based approaches for firms in the construction industry. Accordingly, this study suggests data-driven approaches for evaluating countries using two quantitative models. The first is a two-stage country segmentation model that not only screens negative countries based on country attractiveness (macro-segmentation) but also identifies promising countries based on the level of past project performance in a given country (micro-segmentation). The second is a multi-criteria country segmentation model that combines a firm's business objective with the country evaluation process based on Kraljic's matrix and fuzzy preference relations (FPR). These models utilize not only secondary data from internationally reputable institutions but also performance data on Korean firms from 1990 to 2014 to evaluate 29 countries. The proposed approaches enable firms to enhance their decision-making capacity for evaluating and selecting countries at the early stage of corporate strategy development.

• Journal of the Korea Convergence Society
• /
• v.8 no.10
• /
• pp.239-248
• /
• 2017

The empathy for the corporate social responsibility(CSR) is rapidly expanding around the global company, its range having already spread to the whole world, and CSR activities are actively being carried out. Recently, CSR of the medical institution is not selectively accommodated and applied, but is perceived as a basic capacity and responsibility for sustainable growth and development of medical institution. In this study, the effect of social responsibility of medical institutions on the management performance and organization performance was analyzed. It can be seen that there is a need for a strategy utilizing CSR and organization performance in order to accomplish management goal which is the ultimate output of the organization. It is expected that this study contributes to study related to medical institution CSR as well as suggest a strategy direction through CSR.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.6
• /
• pp.859-867
• /
• 2011

The cold start problem is one of major obstacles to overcome for the commercialization of fuel cell vehicles. However, the cold start characteristics of fuel cell systems are very complicated since various phenomena, i.e. ice-blocking, electro-chemical reactions, heat transfer, and defrosting of BOP components, are involved in them. This paper presents a framework to approach the problem at a full stack scale using Axiomatic Design (AD). It was characterized in terms of Functional Requirements (FRs) and Design Parameters (DPs) while their relations were established in a design matrix. Considering the design matrix, the endplates should have low thermal conductivity and capacity without increase in weight or decrease in structural stiffness. Consequently, composite sandwich endplates were proposed and examined both through finite element analyses and experiments simulating cold start conditions. From the examinations, it was found that the composite sandwich endplates significantly contributed to improving the cold start characteristics of PEMFC.

• Journal of Digital Convergence
• /
• v.20 no.5
• /
• pp.897-908
• /
• 2022

The purpose of this study is to prove the hypothesis that the learning transfer climate, such as individual learning self-efficacy and corporate innovative knowledge transfer, will play a mediating role in the relationship between design competency strengthening education and individual performance considering the designer's characteristics. This is meaningful in expanding the meaning of design education and training by quantitatively analyzing the learning transfer climate that affects learning self-efficacy and organizational culture according to the characteristics of designers, unlike existing studies that simply investigate the satisfaction of education. Specifically, this study set up seven hypotheses, and as a result, it was found that design capacity building education for designers, learning self-efficacy, and learning transfer climate of companies had a significant effect on individual performance.

• Korea Trade Review
• /
• v.43 no.1
• /
• pp.199-221
• /
• 2018

The internationalization of venture firms is of importance resulting from the increased opportunities as well as the entry barriers faced in this process. This study is to investigate barrier factors affecting Korean venture firms' internationalization. Among these factors, we measured relative weights using Analytic Hierarchy Process (AHP). Literatures regarding global firm's internationalization was reviewed, and barriers were classified environment, corporate and CEO barriers. Multiple variables were used in order to measure their relative significance. We surveyed executives of venture firms comprising two groups: first, 15 global venture firms, and secondly, gradually internationalizing firms. The two groups show contradictory results as environment barriers are the primary for born-global ventures and corporate barriers are the primary for gradually internationalizing ventures. Concerning corporate barriers, the lack of marketing capability is the highest barrier for both groups. The CEO barrier is the lowest for both groups. Regarding corporate barriers, gradually internationalizing ventures considers the risk of business as highest, whereas born-global ventures features the lack of R&D capacity as highest Results of this paper imply that firms should consider priority and sequential approaches in facing environment, corporate and CEO barriers.

• Journal of Digital Convergence
• /
• v.14 no.7
• /
• pp.363-371
• /
• 2016

Technology evaluation for technology innovation of venture firms should take the rapidly changing corporate environment, the ambiguity of language used in evaluation, and the inaccuracy of evaluation index into consideration. In this paper, targeting the absorptive capacity and technological entrepreneurship which are typical evaluation factors of venture firms, an ACTEM model to calculate the importance, priority, and dynamic capability of factors, applying Fuzzy-AHP was proposed. The fuzzy theory was introduced to compensate for the ambiguity of cognitive judgments when calculating weighted values for the factors that made up an assessment scale. An assessment criteria framework for absorptive capacity, technological entrepreneurship, and dynamic capability, which were not considered in previous studies on the evaluation and measurement of technological prowess, so that the users could have a realistic alternative to choose. The study compared the ACTEM model with the old AHP assessment method and found that "knowledge acquisition" and "producing ability" were the highest in absorptive capacity and technological entrepreneurship, respectively, thus demonstrating its validity.

• Journal of Technology Innovation
• /
• v.26 no.4
• /
• pp.173-198
• /
• 2018

In this paper, we analyze the determinants of the adoption of industrial robots using the data from 42 countries, and thereby examine the factors underlying the rapid expansion of industrial robots in Korea. To this end, the industrial robot data for the years 2001-2016 were drawn from the World Robotics dataset of the International Federation of Robotics (IFR). The explanatory variables included labor market environment variables and innovation capacity variables extracted from the dataset of the relevant international organizations. For data analysis, the Arellano-Bond dynamic panel analysis was performed to control for the endogeneity problem of some explanatory variables. The empirical results confirmed the exceptionally rapid expansion of industrial robots in Korea as compared to other countries, even when considering the national income level, employment cost, and innovation capacity. This phenomenon could be attributed to both the demand-side and supply-side factors. For one thing, changes in the labor market environment, such as an increase in employment costs, have led to an increase of the corporate demand for industrial robots. For another, the supply-side factors, such as an increase in the capital intensity and innovation capacity of companies, have also contributed to the widespread adoption of industrial robots.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.4
• /
• pp.653-660
• /
• 2021

Renewable energy resources are rapidly becoming an integral part of electricity generation portfolios around the world due to declining costs, government subsidies, and corporate sustainability goal. Interacting wind, solar, and load forecast errors can create significant unpredictable impacts on the distribution system, feeder congestion, voltage standard and reactive power stability margins. These impacts will be increasing with the increasing penetration levels of variable renewable generation in the power systems. There is a limit to the maximum amount of renewable energy sources that can be connected in a distribution feeder by the connection rule of transmission & distribution facility in Korea. This study represents the decision plans of hosting capacity for distribution feeders without the need for significant upgrades to the existing transmission infrastructure. Especially, the paper suggests and discusses the hosting capacity standard of feeder cables and minimum load calculation of distribution feeders.