• Nuclear Engineering and Technology
• /
• v.31 no.4
• /
• pp.401-407
• /
• 1999

We have performed two experiments in the fast critical assembly BFS to measure the effective delayed neutron fraction $\beta$$_{eff}$ values and compared the results to validate the $\beta$$_{eff}$ computation code, BETA-K. Measurements of $\beta$$_{eff}$ were carried out in a metallic plutonium core and a metallic uranium core with Cf$^{252}$ source pseudo-reactivity method. Fission integrals and correction factors, which were used to obtain the experimental $\beta$$_{eff}$ values, were calculated by using the LMR core design computation code system of KAERI. BETA-K has been developed consistently with the hexagonal Nodal Expansion Method (NEM) and it used delayed neutron data of ENDF/B-VI. By comparing the computed $\beta$$_{eff}$ values with the measured ones, we found that the results from BETA-K agreed with the experimental values within the experimental error bound.ror bound.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.470-474
• /
• 2006

This dissertation discuses about a ferrite core plasma source using low operating frequency without sputtering problem by the stored electric field. Compared with the conventional RF power system with 13.56MHz switching frequency, the proposed plasma power system is only separated at 400kHz, so that it makes possible to use of low cost switching elements, PWM control and soft switching. Moreover, it could improve the coupling efficiency for plasma and antenna by using the ferrite core in order to transfer the energy of the load This dissertation tried to analyze new plasma generation method for the plasma generation system by modeling the plasma load and grafting the concept of impedance matching in order to interpret it with the formula This dissertation verified the ferrite core inductive coupling plasma source authorized for 400kHz of low frequency power by applying to the semi-conductor ash process thru the measurement of ash capacity and uniformed plasma distribution on the actual wafer.

• Journal of Korean Society on Water Environment
• /
• v.31 no.5
• /
• pp.507-522
• /
• 2015

In this study, some of the model verification results of STREAM (Spatio-Temporal River-basin Ecohydrology Analysis Model), a newly-developed hybrid watershed model, are presented for the runoff processes of nonpoint source pollution. For verification study of STREAM, the model was applied to a test watershed and a sensitivity analysis was also carried out for selected parameters. STREAM was applied to the Mankyung River Watershed to review the applicability of the model in the course of model calibration and validation against the stream flow discharge, suspended sediment discharge and some water quality items (TOC, TN, TP) measured at the watershed outlet. The model setup, simulation and data I/O modules worked as designed and both of the calibration and validation results showed good agreement between the simulated and the measured data sets: NSE over 0.7 and $R^2$ greater than 0.8. The simulation results also include the spatial distribution of runoff processes and watershed mass balance at the watershed scale. Additionally, the irrigation process of the model was examined in detail at reservoirs and paddy fields.

• Journal of Korean Society on Water Environment
• /
• v.31 no.5
• /
• pp.491-506
• /
• 2015

Distributed models represent watersheds using a network of numerous, uniform calculation units to provide spatially detailed and consistent evaluations across the watershed. However, these models have a disadvantage in general requiring a high computing cost. Semi-distributed models, on the other hand, delineate watersheds using a simplified network of non-uniform calculation units requiring a much lower computing cost than distributed models. Employing a simplified network of non-uniform units, however, semi-distributed models cannot but have limitations in spatially-consistent simulations of hydrogeochemical processes and are often not favoured for such a task as identifying critical source areas within a watershed. Aiming to overcome these shortcomings of both groups of models, a hybrid watershed model STREAM (Spatio-Temporal River-basin Ecohydrology Analysis Model) was developed in this study. Like a distributed model, STREAM divides a watershed into square grid cells of a same size each of which may have a different set of hydrogeochemical parameters reflecting the spatial heterogeneity. Like many semi-distributed models, STREAM groups individual cells of similar hydrogeochemical properties into representative cells for which real computations of the model are carried out. With this hybrid structure, STREAM requires a relatively small computational cost although it still keeps the critical advantage of distributed models.

• Journal of KIISE:Information Networking
• /
• v.30 no.3
• /
• pp.424-436
• /
• 2003

In this paper, we propose the Centroid-based Backbone Core Tree(CBCT) generation algorithm for the shared tree-based IP multicasting. The proposed algorithm is based on the Core Based Tree(CBT) protocol. Despite the advantages over the source-based trees in terms of scalability, the CBT protocol still has the following limitations; first, the optimal core router selection is very difficult, and second, the multicast traffic is concentrated near a core router. The Backbone Core Tree(BCT) protocol, as an extension of the CBT protocol has been proposed to overcome these limitations of the CBT Instead of selecting a specific core router for each multicast group, the BCT protocol forms a backbone network of candidate core routers which cooperate with one another to make multicast trees. However, the BCT protocol has not mentioned the way of selecting candidate core routers and how to connect them. The proposed CBCT generation algorithm employs the concepts of the minimum spanning tree and the centroid. For the performance evaluation of the proposed algorithm, we showed the performance comparison results for both of the CBT and CBCT protocols.

• Progress in Superconductivity and Cryogenics
• /
• v.4 no.1
• /
• pp.110-113
• /
• 2002

The high-tc superconducting fault current limiters (SFCL) are studied worldwide to be classified as resistive type or inductive type such as magnetic shielding type and dc reactor type. This Paper deals with an open core type SFCL, a kind of magnetic shielding type SFCL. We manufactured a 30 kVA open core type SFCL. It was modified from the old one with a rated power of 8 kVA. We stacked four superconducting tubes as magnetic shielding material and used the same primary winding as the old one. The experiments were performed with a maximum source voltage of 1 kV. The results show that the fault current in the source voltage of 1 kVrms was reduced to be about 105 Apeak, which was calculated to be about 22 % of the fault current in the system without an SFCL.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.4
• /
• pp.256-260
• /
• 2015

In this paper, achieved rise temperature distribution about degradation phenomenon of 24 MVA distribution cast resin transformer using CFD(Computational Fluid Dynamics). Usually, life of transformer is depended on temperature distribution of specification region than thermal special quality of transformer interior. Specially, life of transformer by decline of dielectric strength decreases rapidly in case rise by strangeness transformer interior hot spot temperature value permits. Because calculating high-voltage(HV) winding and low-voltage(LV) winding of cast resin transformer and Joule's loss of core for improvement these life, forecasted heat source, and HV winding and LV winding of cast transformer rise temperature distribution of core for supply of electric power and temperature distribution of highest point on the basis of the results. Also, calculated temperature rise limit of cast resin transformer and permission maximum temperature using analysis by electromagnetic heat source. Calculated and forecasted rise temperature distribution by heat source of thermal analysis with calculated result.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.745-747
• /
• 2001

This paper deals with the dynamic characteristics of flat core LOA. The LOA system was represented by the voltage equation of coil and the mechanical equation of motion. Also, driving system was simply composed voltage source inverter and generates square-wave. It is measured that dynamic characteristic vary as square-wave.

• Electronics and Telecommunications Trends
• /
• v.36 no.2
• /
• pp.83-92
• /
• 2021

5G networks are rapidly expanding. Simultaneously, the need for a testbed-not a commercial network-is increasing to verify aspects such as 5G network security vulnerabilities. Open-source projects in 4G networks already exist and are implemented similarly in commercial networks. Due to the compatibilty between 5G and 4G networks, 5G networks are being developed and implemented as open-source projects on the basis of 4G networks. In this study, we review the development trends of 5G open-source projects and simulators that can be used for 5G research.

• Journal of Information Technology Applications and Management
• /
• v.25 no.4
• /
• pp.41-65
• /
• 2018

Corporate Social Responsibility (CSR) activities are important tool in corporate management strategies. However, the way that companies conduct CSR activities might bring different effect on consumers. The purpose of this study is to verify the effect of CSR fit (similarity between the firm's CSR activities and the firm's core products or technologies) on the consumers' evaluation on product performance. In addition to the main effects of CSR fit on perceived product performance, and we also examined how this effect changes when CSR information source and consumer expertise are involved as control variables. Study 1 of this research was conducted with US consumers and study 2 was with Chinese consumers. Experimental results show that consumers' perceive product performance is better when the fit between CSR activities and firm's core products or technologies is low than the fit is high. When CSR information sources are neutral sources, consumers perceive product performance to be better when the fit between the firm's CSR activities and the firm's core products or technologies is low than the fit is high. However when CSR information was delivered by company's source like nadvertisement, such difference disappears. This study also show that the higher the customer's expertise, the better the product performance was perceived for high-fit CSR activities. On the other hand, the lower the consumer's expertise, the better perceived product performance was perceived for low-fit CSR activities.