• Textile Coloration and Finishing
• /
• v.20 no.6
• /
• pp.8-17
• /
• 2008

Poly (vinyl acetate) (PVAc) was used as a precursor of PVA/PVAc (skin/core) bicomponent. In order to investigate the possibility of PVA particles for electrical applications, PVA/PVAc particles were produced with an emulsifier, SDS (Sodium Dodecyl Sulfate) and an initiator, V-50 (2,2'-azobis(2-amidinopropane)digydrochloride). In this study, we investigated the electrical property of PVA/PVAc (skin/core) particles. The hydroxyl group of the PVA/PVAc (skin./core) was confirmed by the analysis of PVAc and PVA/PVAc (skin/core) using Fourier Transform Infrared Spectroscopy (FT-IR). The zeta-potential of the PVA/PVAc (skin/core) and PVAc has similarity; however, charge control agent (CCA) treated PVA/PVAc (skin/core) particles has lower zeta-potential than untreated PVA/PVAc particles. The zeta-potential (negative values) of the PVA/PVAc (skin/core) were enhanced in proportion to the increased concentration of CCA.

• Journal of the Korean Mathematical Society
• /
• v.39 no.5
• /
• pp.745-764
• /
• 2002

In this paper we Study a time-optimal model of pursuit in which the players move on a plane with bounded velocities. This game is supposed to be a nonzero-sum group pursuit game. The main point of the work is to construct and compare cooperative and non-cooperative solutions in the game and make a conclusion about cooperation possibility in differential pursuit games. We consider all possible cooperations of the players in the game. For that purpose for every game $\Gamma(x_0,y_0,z_0)$ we construct the corresponding game in characteristic function form $\Gamma_v(x_0,y_0,z_0)$. We show that in this game there exists the nonempty core for any initial positions of the players. The core can take four various forms depending on initial positions of the players. We study how the core changes when the game is proceeding. For the original agreement (an imputation from the original core) to remain in force at each current instant t it is necessary for the core to be time-consistent. Nonemptiness of the core in any current subgame constructing along a cooperative trajectory and its time-consistency are shown. Finally, we discuss advantages and disadvantages of choosing this or that imputation from the core.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.4
• /
• pp.414-424
• /
• 2022

Objectives: This study was established to ascertain the requirements and implementation of core competencies for employees of the a workers' health center. Methods: The study consisted of a four-step process: a literature review, focus group interviews, expert opinions, and a questionnaire. The survey was conducted online among 119 employees of the National Workers' Health Center. Results: As a result of the research, eleven core competencies and 37 sub-competencies were derived in three areas: Competence as a social worker, competence to perform duties, and competence for maintaining expertise. The key demands for core competencies were "health consultation" and "understanding of small businesses.". They responded that they needed to "maintain an ethical attitude" and "consult on workers' health.". The largest score difference between core competency requirements and competency implementation was "collaboration with the community.". Conclusions: It is necessary to increase competencies not only for competencies with high core requirements, but also for relatively low competencies. In addition, efforts should be made to improve the core competencies of the employees of the Workers' Health Center to effectively respond to changes in the industrial structure and crises such as COVID-19.

• Journal of KIISE:Information Networking
• /
• v.30 no.3
• /
• pp.424-436
• /
• 2003

In this paper, we propose the Centroid-based Backbone Core Tree(CBCT) generation algorithm for the shared tree-based IP multicasting. The proposed algorithm is based on the Core Based Tree(CBT) protocol. Despite the advantages over the source-based trees in terms of scalability, the CBT protocol still has the following limitations; first, the optimal core router selection is very difficult, and second, the multicast traffic is concentrated near a core router. The Backbone Core Tree(BCT) protocol, as an extension of the CBT protocol has been proposed to overcome these limitations of the CBT Instead of selecting a specific core router for each multicast group, the BCT protocol forms a backbone network of candidate core routers which cooperate with one another to make multicast trees. However, the BCT protocol has not mentioned the way of selecting candidate core routers and how to connect them. The proposed CBCT generation algorithm employs the concepts of the minimum spanning tree and the centroid. For the performance evaluation of the proposed algorithm, we showed the performance comparison results for both of the CBT and CBCT protocols.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.10
• /
• pp.183-190
• /
• 2016

In this paper, we have looked at through core competences and contents of Informatics curriculum in middle school by expert questionnaire and Focus Group Interview(FGI). Among nine core competences of Informatics subject in curriculum, abstraction and automation were easily found, but creative harmony and cooperation were indirectly confirmed in the statements of teaching and assessment sections of Informatics curriculum in middle school. It was also identified that some core competency elements are redundant or hardly to found in the contents of Informatics curriculum. In addition, various opinions about Informatics curriculum have been put forward over the FGI. The results of this study will be the case that can be consulted on new revised Informatics curriculum to be developed further.

• Current Optics and Photonics
• /
• v.2 no.3
• /
• pp.226-232
• /
• 2018

We propose a triangular-multicore hollow optical fiber (TMC-HOF) design for uncoupled mode-division and space-division multiplexing. The TMC-HOF has three triangular cores, and each core has three modes: $LP_{01}$ and two split $LP_{11}$ modes. The asymmetric structure of the triangular core can split the $LP_{11}$ modes. Using the proposed structures, nine independent modes can propagate in a fiber. We use a fully vectorial finite-element method to estimate effective index, chromatic dispersion, differential group delay (DGD), and confinement loss by controlling the parameters of the TMC-HOF structure. We confirm that the proposed TMC-HOF shows flattened chromatic dispersion, low DGD, low confinement loss, low core-to-core crosstalk, and low crosstalk between adjacent modes. The proposed TMC-HOF can provide a common platform for MDM and SDM applications.

• Nuclear Engineering and Technology
• /
• v.55 no.8
• /
• pp.2785-2796
• /
• 2023

How to generate the precise broad group cross section is important for the fast reactor design. In this study, a fast reactor multi-group cross-section generation code MGGC2.0 are developed in-house for processing ultrafine group MATXS format library. Validation and verification are performed for MGGC2.0 code by applying the benchmarks of ICSBEP handbook, and the results of MGGC2.0 agree well with that of MCNP. The consistent P_N method with critical buckling search is in good agreement that condensed with TWODANT flux and flux moment for the inner core and outer core region. For the radial blanket and reflector, two region approximation method has been applied in MGGC2.0 by using collision Probability Method neutron flux solver. The RBEC-M benchmark was used to verify the power distribution calculation, and the relative error of power distribution comparison with the reference are less than 0.8% in the fuel region and the maximum relative error is 5.58% in the reflector region. Therefore, the precise broad cross section can be generated by MGGC2.0 for fast reactor.

• Journal of the Korean Society of Physical Medicine
• /
• v.7 no.1
• /
• pp.49-58
• /
• 2012

Purpose : The purpose of this study was to investigate the effects of trunk stabilization exercise using swiss ball and core stabilization exercise on balance and gait in elderly women. Methods : Subjects 19 elderly women were randomly divided by the swiss ball exercise group (n=10) and the core stabilization exercise group (n=9). In a period of 4 weeks, they took trunk stabilization exercise using swiss ball and core stabilization exercise for 60 minutes 3 times a week. Balance and gait were measured by Functional Reach Test (FRT), One Leg Stand Test with Open Eye (OLSTOE), One Leg Stand Test with Closed Eye (OLSTCE), Timed Up and Go Test (TUG) and 6 m Walking Test (6MWT). These tests were measured at before exercise, 4 weeks after exercise and after the follow-up period of 2 weeks. Results : As a result, in all measurement values there was no significant difference in two groups (p>.05). In FRT, TUG, OLSTOE and 6MWT before exercise and 4 weeks after exercise, there was significant difference in both of two groups (p<.05). Moreover, according to results from 4 weeks after exercise and after the follow-up period of 2 weeks, without any particular exercise, in FRT and 6MWT there was no significant difference (p>.05). Conclusion : These finding indicate that trunk stabilization exercise using swiss ball could improve balance and gait in elderly women. Accordingly, In this study trunk stabilization exercise using swiss ball and core stabilization exercise is judged to be used for elderly people with gait and balance problems to prevent hurts from fall.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.4
• /
• pp.415-425
• /
• 2005

Statement of problem : Fracture of composite resin core will be occulted by progress of crack. Bonding interface of different materials has large possibility of starting point of crack line. Therefore, the bond strength of glass fiber post to composite resin core is important for prevention of fracture. Purpose: This in vitro study tried to find out how to get the higher strength of glass fiber post to composite resin core through surveying the maximum load that fractures the post and cote complex. Materials and methods: 40 specimens made with glass fiber Posts(Style $post^{(R)}$, Metalor, Swiss) and composite resin core ($Z-100^{(R)}$, 3M, USA) were prepared and loaded to failure with push-out type shear-bond strength test in a universal test machine. The maximum fracture load and fracture mode were investigated in the specimens that were restored with four different surface treatments. With the data. ANOVA test was used to validate the significance between the test groups, and Bonferroni method was used to check if there is any significant statistical difference between each test group. Evely analysis was approved with 95% reliance. Results: On measuring the maximum fracture load of specimens, both the treatments of sandblasted and acid-etched one statistically showed the strength increase rather than the control group (p<0.005). The scanning electric microscope revealed that sand blasting made more micro-retention form not only on the resin matrix but on the glass fiber, and acid-etching contributed to increase in surface retention form, eliminated the inorganic particles in resin matrix. Specimen fracture modes investigation represented that sand blasted groups showed lower bonding failure than no-sand blasted groups. Conclusion: Referring to the values of maximum fracture load of specimens, the bonding strength was increased by sand blasting and acid-etching.

• Nuclear Engineering and Technology
• /
• v.51 no.8
• /
• pp.1871-1885
• /
• 2019

The deterministic MOC code STREAM of the Computational Reactor Physics and Experiment (CORE) laboratory of Ulsan National Institute of Science and Technology (UNIST), was initially designed for the calculation of pressurized water reactor two- and three-dimensional assemblies and cores. Since fast reactors play an important role in the generation-IV concept, it was decided that the code should be upgraded for the analysis of fast neutron spectrum reactors. This paper presents a coupled code - TULIP/STREAM, developed for the fast reactor assembly and core calculations. The TULIP code produces self-shielded multi-group cross-sections using a one-dimensional cylindrical model. The generated cross-section library is used in the STREAM code which solves eigenvalue problems for a two-dimensional assembly and a multi-assembly whole reactor core. Multiplication factors and steady-state power distributions were compared with the reference solutions obtained by the continuous energy Monte-Carlo code MCS. With the developed code, a sensitivity study of the number of energy groups, the order of anisotropic P_N scattering, and the multi-group cross-section generation model was performed on the k_eff and power distribution. The 2D core simulation calculations show that the TULIP/STREAM code gives a k_eff error smaller than 200 pcm and the root mean square errors of the pin-wise power distributions within 2%.