• Title/Summary/Keyword: core area

Search Result 2,002, Processing Time 0.026 seconds

Analysis of the flow distribution and mixing characteristics in the reactor pressure vessel

  • Tong, L.L.;Hou, L.Q.;Cao, X.W.
    • Nuclear Engineering and Technology
    • /
    • v.53 no.1
    • /
    • pp.93-102
    • /
    • 2021
  • The analysis of the fluid flow characteristics in reactor pressure vessel is an important part of the hydraulic design of nuclear power plant, which is related to the structure design of reactor internals, the flow distribution at core inlet and the safety of nuclear power plant. The flow distribution and mixing characteristics in the pressurized reactor vessel for the 1000MWe advanced pressurized water reactor is analyzed by using Computational Fluid Dynamics (CFD) method in this study. The geometry model of the full-scaled reactor vessel is built, which includes the cold and hot legs, downcomer, lower plenum, core, upper plenum, top plenum, and is verified with some parameters in DCD. Under normal condition, it is found that the flow skirt, core plate holes and outlet pipe cause pressure loss. The maximum and minimum flow coefficient is 1.028 and 0.961 respectively, and the standard deviation is 0.019. Compared with other reactor type, it shows relatively uniform of the flow distribution at the core inlet. The coolant mixing coefficient is investigated with adding additional variables, showing that mass transfer of coolant occurs near the interface. The coolant mainly distributes in the 90° area of the corresponding core inlet, and mixes at the interface with the coolant from the adjacent cold leg. 0.1% of corresponding coolant is still distributed at the inlet of the outer-ring components, indicating wide range of mixing coefficient distribution.

A Study on the Setting Criteria and Management Area for the National Ecological Network (광역생태축 구축을 위한 기준 및 관리지역 설정 연구)

  • Jeon, Seong-Woo;Chun, Joung-Yoon;Seong, Hyeon-Chan;Song, Won-Kyong;Park, Ji-Hee
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • v.13 no.5
    • /
    • pp.154-171
    • /
    • 2010
  • This study was performed to show criteria of a National Ecological Network (NEN) for South Korea and it was a part of a study of ecological network for broad areas on national land showed by Ministry of Environment of Korea. After 1970s, many european countries presented methods and criteria not on individual protected area but on networking among many habitats. The PEEN (Pan European Ecological Network) and NATURA 2000 are results of those. In South Korea, concepts and mapping metheods of ecological network was studied but those were not applied to the whole national land because the equality and local specialities were not reflected. So, in this study, we presented the criteria composed of forest, river, wildlife and coastal evaluation items in conservation ecology and showed the mapping method which can applied to the national land. After the evaluation on land area which composed of forest, river and wildlife axis. Core areas were $30,616km^2$, buffer zone were $21,870km^2$ and each accounted for 31% and 22% of the national land. Except for Taebaeck-Gangwon region, whole region's core areas were accounted for 20~30% of it and buffer zone were accounted for 20~25% of it, so these can be applied to the national land with equality and local specialities. Forest axis and river axis were clearly linear and connected, but the wildlife axis was dispersed in point form. Therefore, to apply the NEN, a detailed habitat map is important and the interconnected implementation of forest, river, wildlife, and coastal axis is required.

Distribution of Free Sugars in the Various Portions of Watermelon (Citrullus vuigaris L.) and Muskmelon (Cucumis meio var. reticulatus Naud.) (수박과 멜론의 부위별 유리당 함량 분포에 관한 연구)

  • Sohn, Joo-Yong;Ban, Sung-Chul;Hong, Sung-Hoi;Shin, Jeong-Sheop
    • Applied Biological Chemistry
    • /
    • v.39 no.3
    • /
    • pp.200-205
    • /
    • 1996
  • This experiment was conducted to characterize and quantify the free sugars (glucose, fructose, sucrose, maltose) contained in many different portions of watermelon (Citrus vulgaris L.) and muskmelon (Cucumis melo var. reticulatus Naud.) fruits by High Performance Liquid Chromatography (HPLC). Free sugars were mainly fructose, glucose, sucrose, and their contents were variable among portions. Total free sugar contents were higher in the stylar end and side than in the stem end of both watermelon and muskmelon. Total free sugar contents increased from the periphery toward the central core in watermelon and except central core content seeds in muskmelon Ratio of nonreducing to reducing sugars [(fructose + glucose)/sucrose] was gradually decreased from the periphery toward the middle area in watermelon, though the central core showed higher value than the middle area. For the edible portion of muskmelon, the ratio was decreased toward middle area, and no significant difference was observed between the central core and the middle area. However, reducing sugars and nonreducing sugar were all increased from the periphery toward the central core in watermelon. In contrast with watermelon, reducing sugars were decreased in muskmelon.

  • PDF

Quality Evaluations of Induction Motor Rotors during Die Casting Process II (유도전동기 회전자 금형주조 시 품질평가 II)

  • Park, Sang-Chul
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.20 no.7
    • /
    • pp.347-352
    • /
    • 2019
  • This study focused on improving the cast quality of small-sized induction motor rotors during the die casting process. A new rotor core cast model was proposed based on previous research results and parametric studies. Numerical analyses using 3-dimensional half models were performed to evaluate the filling patterns of aluminum molten metals into a mold and on-site experiment performed to verify the newly proposed cast model. The following were obtained from numerical filling analyses and experimental results. First, molten metals started to fill the lower end ring, then moved on to fill the core slot and upper end ring and finally stopped to fill at the rotor core slot. Second, significant circulation of molten metals was not observed on the lower end ring, resulting in fewer defects at the section of the lower end ring from the experimental results. Third, the new shape of a rotor core cast was effective in producing rotors with sound cast quality, and reducing the end ring cast defect area by approximately 70 %.

Comparison of Machinability Between PCD Tool and SCD Tool for Large Area Mirror Surface Machining Using Multi-tool by Planer (평삭공정에서 경면가공을 위한 단결정 및 다결정 다이아몬드 다중공구의 가공성 평가)

  • Kim, Chang-Eui;Choi, Hwan-Jin;Jeon, Eun-Chae;Je, Tae-Jin;Kang, Myung-Chang
    • Journal of Powder Materials
    • /
    • v.20 no.4
    • /
    • pp.297-301
    • /
    • 2013
  • Mirror surface machining for large area flattening in the display field has a problem such as a tool wear and a increase in machining time due to large area machining. It should be studied to decrease machining time and tool wear. In this paper, multi-tool machining method using a PCD tool and a SCD tool was applied in order to decrease machining time and tool wear. Machining characteristics (cutting force, machined surface and surface roughness) of PCD tool and SCD tool were evaluated in order to apply PCD tool to flattening machining. Based on basic experiments, the PCD/SCD multi-tool method and the SCD single-tool method were compared through surface roughness and machining time for appllying large area mold machining.

A Study on Steady and Unsteady Behavior of Helium Jet in the Stationary Atmosphere (헬륨 기체분류의 정상적 비정상적 거동에 관한 연구)

  • Kim, B.G.;Suh, Y.K.;Ha, J.Y.;Kwon, S.S.
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.1 no.3
    • /
    • pp.34-45
    • /
    • 1993
  • This study aims to analyze the mixing characteristics of hydrogen considered as a new fuel for internal combustion engines. As the physical property of helium gas is similar to that of hydrogen, helium gas was used in this study. To analyze the steady and unsteady behavior of jet, helium gas was injected into the stationary atmosphere at the normal temperature and pressure. Concentration of helium gas in the center of jet flow is in inverse proportion with axial distance from the nozzle tip. This agrees with the free jet theory of Schlichting. The relative equation for dimensionless concentration to radial/axial distance the axial distance of potential core region, the cone angle a of the jet flow and the relative equation for arriving distance of the front of jet flow to the lapse of time are obtained. But free jet theory of Schlichting in the dimensionless concentration is not in agreement with the present experimental results of the distance of the radial direction. It needs more study. When the arrival frequency of jet flow is used as a parameter, the transition area changing from unsteady flow area into steady flow area becomes gradually wider downstream, but its ratio for the whole unsteady flow area gradually decreases.

  • PDF

A Study on Vegetation Index for Zoning of Natural Ecosystem on Baekdudaegan (백두대간 자연생태계의 지역구분을 위한 식생지수에 관한 연구)

  • 김갑태
    • Korean Journal of Environment and Ecology
    • /
    • v.16 no.3
    • /
    • pp.223-232
    • /
    • 2002
  • For the zoning of natural ecosystem, Vegetation Index is calculated from the vegetation data surveyed on Baekdudaegan (Pijae-Doraegijae). Five factors -biodiversity, conservation value of the stand, environmental quality, longevity of the stand, site productivity- are considered in the calculation of Vegetation Index. Vegetation Index might be a useful zoning tool for management of Baekdudaegan. For Vegetation Index I, 59 sample plots 52.2% of total 113 sample plots are belong to core area, 34 sample plots 30.l% and 20 sample plots 17.7% are belong to buffer zone and transition area, respectively. For Vegetation Index II, 49 sample plots 43.4% of total 113 sample plots are belong to core area, 38 sample plots 33.6% and 26 sample plots 23.0% are belong to buffer zone and transition area, respectively.

A Study on the Characteristics of the Super High-Rise Housing Complex in Hong Kong (홍콩 초고층 주거단지의 특징에 관한 연구)

  • Kim Sung-Hwa;Lee Jae-Hoon
    • Journal of the Korean housing association
    • /
    • v.16 no.4
    • /
    • pp.37-44
    • /
    • 2005
  • The purpose of this study is to analyze the typological characteristics of super high-rise housings in Hong Kong. The results are as follows; 1) Most of the plan types of the residential building in Hong Kong are tower types and they show lots of curves on the external resident blocks so that each resident families can face maximum open air. 2) Each residential unit is arranged symmetrically and systematically around the central core. 3) The most of core types are central core types which are usually planned to place void light well to improve lighting and ventilation. 4) Rooms are arranged in line from entrance to kitchen, to living & dinning room, and finally bedroom and bathroom. Dinning area is arranged together with living area. 5) At least, more than two sides of the each unit were facing the open air; one side is for the view from a bedroom or a livingroom, the other side is for the ventilation of a kitchen or a bathroom.

Effects of Wound Dressing with Thiophanate-Methyl Paste on Compartmentalization of Pruning Wounds

  • Lee, Kyu-Hwa;Lee, Kyung-Joon
    • Journal of Korean Society of Forest Science
    • /
    • v.99 no.2
    • /
    • pp.220-225
    • /
    • 2010
  • This study was conducted to examine the effects of wound dressing with thiophanate-methyl paste on the compartmentalization of pruning wounds in Acer palmatum. A total of thirty field-grown trees were used for three different treatments, such as no dressing, dressing once right after pruning cut, and dressing twice, one more dressing treatment one year after initial dressing. Wound closure rate (WCR) and discolored/wound area ratio (D/W ratio) two years after treatment were measured. Variations of extractives, holocellulose and lignin at the treated branch unions were also examined. The WCR of no dressing treatment of 70.9% was significantly lower than those of the two dressing treatments (85.4% and 82.7%, respectively), while the difference between dressing once and twice was not significant. The D/W ratio of no dressing treatment (39.3%) was significantly higher than those of the two dressing treatments (around 30%). Generally, at the branch core of the treated union, contents of extractives and lignin were higher and holocellulose contents were lower than the branch core of the union with living branch. Among the branch core of treated union, no dressing treatment showed a relatively lower holocellulose (63.5%), and relatively higher extractives (2.8%) and lignin (26.6%) than dressing once (66.2%, 1.7%, 26.1%, respectively).

Ventral Striatal Connections of Unimodal and Multimodal Cortex of the Superior Temporal Sulcus in Macaque Monkeys(Macacca nemestrina)

  • Jung, Yong-Wook;Hong, Sung-Won
    • Animal cells and systems
    • /
    • v.8 no.4
    • /
    • pp.319-328
    • /
    • 2004
  • Extrinsic connections between the cortex of the superior temporal sulcus (STS) and the ventral striatum in pigtail macaque monkeys (Macacca nemestrina) were studied by injection of retrograde tracers into the ventromedial caudate nucleus, the ventral and central shells of the nucleus accumbens (NA), the dorsal core of the NA, and the ventrolateral putamen. In the present study, we demonstrate that the projections from the unimodal (area TAa, IPa, TEa, and TEm) and the multimodal (area TPO and PGa) sensory association areas in the STS mainly terminate in the ventromedial caudate nucleus as well as in the ventral and central shells of the NA. However, there are only few projections to the dorsal core of the NA and the ventrolateral putamen from the sensory association cortex in the STS. Based on these differential neural connections between the subterritories of the ventral striatum and the sensory association areas, the ventromedial caudate nucleus and the shells of NA appear to be major integration sites for sensory input from the STS and functionally different from the dorsal core of NA and the ventrolateral putamen.