• 한국분말재료학회지
• /
• 제21권5호
• /
• pp.377-381
• /
• 2014

This work describes the coloration, chemical stability of $SiO_2$ and $SnO_2$-coated blue $CoAl_2O_4$ pigment. The $CoAl_2O_4$, raw materials, were synthesized by a co-precipitation method and coated with silica ($SiO_2$) and tin oxide ($SnO_2$) using sol-gel method, respectively. To study phase and coloration of $CoAl_2O_4$, we prepared nano sized $CoAl_2O_4$ pigments which were coated $SiO_2$ and $SnO_2$ using tetraethylorthosilicate, $Na_2SiO_3$ and $Na_2SiO_3$ as a coating material. To determine the stability of the coated samples and their colloidal solutions under acidic and basic conditions, colloidal nanoparticle solutions with various pH values were prepared and monitored over time. Blue $CoAl_2O_4$ solutions were tuned yellow color under all acidic/basic conditions. On the other hand, the chemical stability of $SiO_2$ and $SnO_2$-coated $CoAl_2O_4$ solution were improved when all samples pH values, respectively. Phase stability under acidic/basic condition of the core-shell type $CoAl_2O_4$ powders were characterized by transmission electron microscope, X-ray diffraction, CIE $L^*a^*b^*$ color parameter measurements.

• 한국정밀공학회지
• /
• 제29권11호
• /
• pp.1190-1198
• /
• 2012

A hot forming of large thick Al plate using a grid-type hybrid die is a process to make a shell plate for the production of a spherical LNG tank. This process is characterized by using a grid-typed die with an additional air cooling system for reducing the cooling time of the heated plate after hot forming. The process consists of the plate's feeding, heating, forming and cooling in detail and each of them is continuously performed along the rail. This paper was designed to propose the analytical and experimental methods for determining the convection and interfacial heat transfer coefficients required in hot forming analysis of Al plate. These values in the analysis are to reproduce numerically the cooling performance of grid-typed die and cooling device. Interfacial heat transfer was obtained from the heat transfer experiments for different pressures and inverse analysis method. To verify the efficiency of the coefficient values obtained from above methods, FE analysis and experiment of the hot spherical-forming process were conducted for a small-scaled model. The convection coefficient was also calculated from flow analysis of air released by cooling device within grid-typed die using ANSYS-CFX.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.246.1-246.1
• /
• 2014

Over the past several years, colloidal core/shell type quantum dots lighting-emitting diodes (QDLEDs) have been extensively studied and developed for the future of optoelectronic applications. In the work, we fabricate an inverted CdSe/ZnS quantum dot (QD) based light-emitting diodes (QDLED). In order to reduce work function of indium tin oxide (ITO) electrode for inverted structure, a very thin (<10 nm) polyethylenimine ethoxylated (PEIE) is used as surface modifier[1] instead of conventional metal oxide electron injection layer. The PEIE layer substantially reduces the work function of ITO electrodes which is estimated to be 3.08 eV by ultraviolet photoemission spectroscopy (UPS). From transmission electron microscopy (TEM) study, CdSe/ZnS QDs are uniformly distributed and formed by a monolayer on PEIE layer. In this inverted QDLEDs, blend of poly (9,9-di-n-octyl-fluorene-alt-benzothiadiazolo) and poly(N,N'-bis(4-butylphenyl)-N,N'-bis(phenyl)benzidine] are used as hole transporting layer (HTL) to improve hole transporting property. At the operating voltage of 8 V, the QDLED device emitted spectrally orange color lights with high luminance up to 2450 cd/m2, and showed current efficacy of 0.6 cd/A, respectively.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.432.2-432.2
• /
• 2014

Recently, colloidal core/shell type quantum dots lighting-emitting diodes (QDLEDs) have been extensively studied and developed for the future of optoelectronic applications. In the work, we fabricate an inverted CdSe/ZnS quantum dot (QD) based light-emitting diodes (QDLED)[1]. In order to reduce work function of indium tin oxide (ITO) electrode for inverted structure, a very thin (<10 nm) polyethylenimine ethoxylated (PEIE) is used as surface modifier[2] instead of conventional metal oxide electron injection layer. The PEIE layer substantially reduces the work function of ITO electrodes which is estimated to be 3.08 eV by ultraviolet photoemission spectroscopy (UPS). From transmission electron microscopy (TEM) study, CdSe/ZnS QDs are uniformly distributed and formed by a monolayer on PEIE layer. In this inverted QD LED, two kinds of hybrid organic materials, [poly (9,9-di-n-octyl-fluorene-alt-benzothiadiazolo)(F8BT) + poly(N,N'-bis (4-butylphenyl)-N,N'-bis(phenyl)benzidine (poly-TPD)] and [4,4'-N,N'-dicarbazole-biphenyl (CBP) + poly-TPD], were adopted as hole transport layer having high highest occupied molecular orbital (HOMO) level for improving hole transport ability. At a low-operating voltage of 8 V, the device emits orange and red spectral radiation with high brightness up to 2450 and 1420 cd/m2, and luminance efficacy of 1.4 cd/A and 0.89 cd/A, respectively, at 7 V applied bias. Also, the carrier transport mechanisms for the QD LEDs are described by using several models to fit the experimental I-V data.

• 한국자동차공학회논문집
• /
• 제19권5호
• /
• pp.58-66
• /
• 2011

A 2-loop waste heat recovery system with Rankine steam cycles for the improvement of fuel efficiency of gasoline vehicles has been investigated. A high temperature loop(HT loop) is a system to recover the waste heat from the exhaust gas, a low temperature loop(LT loop) is for heat recovery from the engine coolant cold relatively. This paper has dealt with a layout of a LT loop system, the review of the working fluids, and the design of the cycle. The design point and the target heat recovery of the LT boiler, a core part of a LT loop, has been presented and analytically investigated. Considering the characteristics of the cycle, the basic concept of the LT boiler has been determined as a shell-and tube type counterflow heat exchanger, the performance characteristics for various design parameters were investigated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.723-725
• /
• 2003

The result of design and Partial fabrication of a 1 MVA single phase high temperature superconducting(HTS) transformer for power distributions are presented in this paper. The HTS windings are wound as double pancake windings which have advantages of uniform distribution of high voltage over the windings. the rated primary and secondary voltages are 22.9 kV and 6.6 kV respectively. Four HTS tapes are wound in parallel for secondary windings considering the rated currents of the transformer. The HTS windings will be cooled down to 65 K by natural convection of sub-cooled liquid nitrogen using a single-staged GM-cryocooler in order to make the stability of the HTS windings better. The iron core is designed as shell type and isolated from the liquid nitrogen by an FRP cryostat which have a room temperature bore. After the complete fabrication of the total HTS transformer system, performance test of the transformer will be carried out.

• 암석학회지
• /
• 제22권3호
• /
• pp.219-233
• /
• 2013

부산광역시 동부의 장산화산암체는 화산함몰체로 알려져 있고, 화산함몰체 외각부를 따라 구과상 유문암이 $60^{\circ}{\sim}90^{\circ}$의 각도로 수직유상구조를 보여주며 환상암맥으로 나타난다. 구과의 직경은 수 mm에서 2.8 cm 이상이며, 평균적으로 5~10 mm로 측정되었다. 이들 구과는 하나의 핵을 중심으로 방사상을 나타내는 단식 구과형과 육안상 흰색을 띠는 각을 가지면서 핵 부분을 중심으로 방사상을 나타내는 방사상 단식 구과형으로 비교적 단순한 형태를 보여주며, 이들 구과들이 서로 인접하여 합체된 포도송이와 같은 집합체를 보여주기도 한다. 구과의 동심원상 핵 부분에 대한 전자현미분석 결과, 은미정질 기질부 물질의 성분은 주로 $SiO_2$가 거의 82% 이상, $Al_2O_3$는 7~10%, $Na_2O+K_2O$는 8% 이하의 실리카 물질과 장석(새니딘)의 미세한 섬유상 교생으로 나타났다. 구과에 대한 X-선 회절분석 결과, 석영, 새니딘, 앨바이트 그리고 소규모의 운모, 카오린, 녹니석으로 구성되며, X-선 면분석 결과, 핵 부분은 $SiO_2$가 풍부하며, 각 부분은 $Na_2O$ 또는 $K_2O$, $Al_2O_3$가 풍부하였다. 장산콜드론의 유문암 암맥에서 나타나는 구과의 깃털형과 비등형 결정 형태는 마그마 관입에 의한 이동속도보다 유리질 물질로부터 탈유리화작용이 더 빠른 속도로 진행되었고, 비교적 정체된 상태에서 급속한 냉각으로 형성되었음을 지시한다. 구과들은 고규산(75.4~75.7 wt.%) 유문암질 마그마로부터 유래되었다.

• Composites Research
• /
• 제29권4호
• /
• pp.145-150
• /
• 2016

Polyvinylidene fluoride (PVDF)는 압전성을 나타내는 대표적인 고분자로 1960년대부터 많은 연구가 진행되어 왔다. PVDF는 반결정의 고분자로써 5가지의 결정 구조(${\alpha}$, ${\beta}$, ${\gamma}$, ${\delta}$, 그리고 ${\varepsilon}$형)로 구성되어 있다. ${\alpha}$형과 ${\delta}$형 결정은 전기적으로 반응하지 않는 무극성 결정구조이나 ${\beta}$형, ${\gamma}$형 그리고 ${\varepsilon}$형은 전기적으로 반응하는 극성 결정구조이다. 그 중에서도 ${\beta}$형 결정구조는 트랜스 형 분자 쇄가 평행으로 충진 된 형태로서 PVDF 단위체가 갖는 영구 쌍극자가 모두 한 방향으로 배열되어 있는 구조이기 때문에 자발 분극이 커지게 되고 압전성을 나타내게 된다. 일반적으로 ${\beta}$형 결정구조는 연신을 통한 ${\alpha}$형 결정구조의 변환을 통하여 얻을 수 있고, 연신 후 후처리 공정을 통해 그 양을 증가시킬 수 있다. 습식방사로 제조된 PVDF 섬유는 응고욕에서 극성 용매의 확산 메커니즘에 의해 ${\beta}$형 결정구조가 형성되는 장점을 가지고 있지만 극성 용매가 빠져나감과 동시에 섬유 고화가 진행되기 때문에 용매의 확산 경로가 섬유 내부 기공으로 남게 되는 단점을 가지고 있다. 이 기공은 폴링(Poling) 공정에서 전기장에 의한 분극을 방해하여 그 효과를 감소시키는 역할을 한다. 또한, PVDF 섬유가 압전 특성을 필요로 하는 응용분야에 사용되기 위해서는 섬유 가공 후에 전극이 반드시 부착되어야 하는데 섬유 형태로 제조된 PVDF에 전극을 형성하기는 매우 어렵다. 본 연구에서는 압전성을 갖는 PVDF 섬유를 습식 방사와 건식 방사의 혼합 공정으로 제조하여 기공 문제를 해결하였고, 전극이 섬유 내부에 삽입된 Core/Shell 형태의 PVDF 섬유를 제조하여 까다로운 전극형성 문제를 해결하였다.

• 멤브레인
• /
• 제30권4호
• /
• pp.228-241
• /
• 2020

리튬 이온 전지의 양극과 음극 사이에 물리적인 층을 만들어주는 분리막은 분리막의 품질에 따라 리튬 이온 전지의 성능을 결정함에 따라 많은 관심을 받고 있다. 일반적으로 전기화학적 안정성과 적절한 역학적 강도를 갖고 있는 폴리에틸렌과 폴리프로필렌으로 구성된 다공성 막이 리튬 이온 전지의 분리막으로 사용된다. 하지만 폴리에틸렌과 폴리프로필렌의 낮은 열 저항성과 젖음성으로 인해 리튬 이온 전지의 잠재력을 충분히 끌어내지 못한다. 녹는점 이상의 온도에 도달하게 되면 분리막의 구조가 변형되고 리튬 이온 전지는 단락된다. 분리막의 낮은 젖음성은 낮은 이온전도도와 부합하고, 이는 전지의 저항을 상승시킨다. 이러한 폴리에틸렌과 폴리프로필렌 분리막의 단점을 극복하고자 이중 전기방사방법, 코팅 층 도포 방법, 코어 셸 구조 형성 방법, 제지법 등 여러 가지 방법들이 연구되었다. 언급된 방법들로 합성된 분리막들은 열 저항성과 젖음성이 크게 향상되었고 유연성과 인장 강도 같은 역학적 특성도 향상되었다. 본 리뷰 논문에는 각기 다른 방법으로 형성된 리튬이온 전지의 분리막에 대해서 다루고 있다.

• 설비공학논문집
• /
• 제29권6호
• /
• pp.327-340
• /
• 2017

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2016. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of flow, heat and mass transfer, the reduction of pollutant exhaust gas, cooling and heating, the renewable energy system and the flow around buildings. CFD schemes were used more for all research areas. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results of the long-term performance variation of the plate-type enthalpy exchange element made of paper, design optimization of an extruded-type cooling structure for reducing the weight of LED street lights, and hot plate welding of thermoplastic elastomer packing. In the area of pool boiling and condensing, the heat transfer characteristics of a finned-tube heat exchanger in a PCM (phase change material) thermal energy storage system, influence of flow boiling heat transfer on fouling phenomenon in nanofluids, and PCM at the simultaneous charging and discharging condition were studied. In the area of industrial heat exchangers, one-dimensional flow network model and porous-media model, and R245fa in a plate-shell heat exchanger were studied. (3) Various studies were published in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, subjects include mobile cold storage heat exchanger, compressor reliability, indirect refrigeration system with $CO_2$ as secondary fluid, heat pump for fuel-cell vehicle, heat recovery from hybrid drier and heat exchangers with two-port and flat tubes. In the alternative refrigeration/energy system category, subjects include membrane module for dehumidification refrigeration, desiccant-assisted low-temperature drying, regenerative evaporative cooler and ejector-assisted multi-stage evaporation. In the system control category, subjects include multi-refrigeration system control, emergency cooling of data center and variable-speed compressor control. (4) In building mechanical system research fields, fifteenth studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, renewable energies, etc. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which could be help for improving the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the analyses of indoor thermal environments controlled by portable cooler, the effects of outdoor wind pressure in airflow at high-rise buildings, window air tightness related to the filling piece shapes, stack effect in core type's office building and the development of a movable drawer-type light shelf with adjustable depth of the reflector. The subjects of building energy were worked on the energy consumption analysis in office building, the prediction of exit air temperature of horizontal geothermal heat exchanger, LS-SVM based modeling of hot water supply load for district heating system, the energy saving effect of ERV system using night purge control method and the effect of strengthened insulation level to the building heating and cooling load.