Proceedings of the KIEE Conference (대한전기학회:학술대회논문집)
- 2003.07b
- /
- Pages.723-725
- /
- 2003
Design and Fabricate a 1 MVA Single Phase HTS Transformer with Four Parallel Pancake Windings
4병렬 팬케이크 권선을 사용한 1 MVA 단상 고온초전도 변압기의 설계 및 제작
-
Kim, Woo-Seok
(Electrical Engineering and Science Research Institute)
;
- Kim, Sung-Hooon (School of Electrical Engineering and Computer Science, Seoul National University) ;
- Lee, Sang-Jin (Uiduk University) ;
-
Choi, Kyeong-Dai
(Graduate School of Energy, Korea Polytechnic University)
;
-
Joo, Hyeong-Gil
(Graduate School of Energy, Korea Polytechnic University)
;
-
Hong, Gye-Won
(Graduate School of Energy, Korea Polytechnic University)
;
-
Han, Jin-Ho
(Graduate School of Energy, Korea Polytechnic University)
;
- Hahn, Song-Yop (School of Electrical Engineering and Computer Science, Seoul National University) ;
- Park, Jung-Ho (Hyosung Corporation) ;
- Song, Hee-Suck (Hyosung Corporation)
-
김우석
(기초전력공학공동연구소)
;
- 김성훈 (서울대학교 전기.컴퓨터공학부) ;
- 이상진 (위덕대학교) ;
-
최경달
(한국산업기술대학교)
;
-
주형길
(한국산업기술대학교)
;
-
홍계원
(한국산업기술대학교)
;
-
한진호
(한국산업기술대학교)
;
- 한송엽 (서울대학교 전기.컴퓨터공학부) ;
- 송회석 (효성중공업연구소) ;
- 박정호 (효성중공업연구소)
- Published : 2003.07.21
Abstract
The result of design and Partial fabrication of a 1 MVA single phase high temperature superconducting(HTS) transformer for power distributions are presented in this paper. The HTS windings are wound as double pancake windings which have advantages of uniform distribution of high voltage over the windings. the rated primary and secondary voltages are 22.9 kV and 6.6 kV respectively. Four HTS tapes are wound in parallel for secondary windings considering the rated currents of the transformer. The HTS windings will be cooled down to 65 K by natural convection of sub-cooled liquid nitrogen using a single-staged GM-cryocooler in order to make the stability of the HTS windings better. The iron core is designed as shell type and isolated from the liquid nitrogen by an FRP cryostat which have a room temperature bore. After the complete fabrication of the total HTS transformer system, performance test of the transformer will be carried out.
Keywords