• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.3
• /
• pp.160-167
• /
• 2006

Harpacticoid copepod Tigriopus japonicus is widely distributed in coastal waters of Korea and plays important role in marine trophic structure as a first consumer. In this study, a series of experiment were conducted to test the potential of the species as a standard test species for marine bioassay. Tolerance on salinity and pH, sensitivity on the reference materials(copper sulfate and cadmium chloride) and response on the ocean dumping materials(waste sludge) we re tested to identify if the species satisfy the basic criteria as standard species for marine bioassay. The nauplius of the species($100{\sim}200{\mu}m$) showed wide tolerance on salinity with >90.0% survival rates exposed to $5.0{\sim}35.0psu$ for 48 h. Wide adaptability on pH's were also observed from 6.3 to 8.2 with >90.0% survival rates during the test. $LC_{50}$ values for copper sulfate and cadmium chloride were $3.6{\pm}0.7ppm,\;1.7{\pm}0.8ppm$, respectively. The variations in mortality between replicates were less than 10.0%. Comparison of $LC_{50}$ values indicated that T. japonicus nauplius was lower sensitive to copper sulfate than the most marine crustaceans included copepods, however, the sensitivity of test animal to cadmium chloride higher than the adults of copepod T. japonicus, Paracalanus parvus, and marine rotifer Brachinonus plicatilis. There were significant concentration-response relationship in the mortality of T. japonicus nauplius using the elutriates of three ocean dumping materials(industrial waste sludge). 48 h $LC_{50}$ values we re $31.1{\pm}1.1%$ for the elutriate of sludge from leather processing company and $54.4{\pm}15.1%$ for that of dye production company. Based on the above experimental results, bioassay using benthic harpacticoid T. japonicus nauplius must be a good estimation tool for marine ecotoxicological assessment of waste or chemicals. Wide tolerance on the salinity and pH, and significant linear relationship between concentration and response(mortality) supported the high potential of the species as a standard test species.

• Journal of Environmental Science International
• /
• v.20 no.9
• /
• pp.1087-1093
• /
• 2011

The mixotrophic marine ciliate Mesodinium rubrum possesses a highly modified algal endosymbiont as a nutrition source for the species. Accordingly, we assumed that the species can reflect the ecotoxicity on marine producer (as phytoplankton) and consumer (as zooplankton) both. A series of experiments were conducted to identify the potential of the species as a standard test species for marine ecotoxicological study. The comparison of species sensitivity on reference toxic materials was made using potassium dichromate for phytoplankton and copper chloride for zooplankton. The ciliate revealed the highest sensitivity on both reference materials among the seven test species including phytoplankton, benthic copepod and rotifer species. The toxicity end point of the species was 72hr-$EC_{50}$=1.52 mg/L (as potassium dichromate) estimated by population growth inhibition (PGI), which is more sensitive than the most sensitive phytoplankton Skeletonema costatum (72hr-$EC_{50}$=3.05 mg/L). As comparison to rotifer, it also revealed higher sensitivity on copper chloride; 72hr-$EC_{50}$=0.38 mg/L for ciliate and 48hr-$EC_{50}$=0.48 mg/L for rotifer. Also, the elutriate toxicity test of various ocean disposal wastes were conducted to identify the potential of ciliate toxicity test application using industrial waste sludges. The toxicity of leather processing waste sludge was highest on the ciliate, followed by dyeing waste sludge and dye production waste sludge as an increasing order of toxicity. 72h-$EC_{50}$ of ciliate PGI test was 1.83% and that of S. costatum 3.84% for leather waste sludge which showed highest toxicity. The toxicity test results also revealed that the highest sensitivity was observed on ciliate species on ocean disposed sludge wastes. Also, ciliate toxicity test well discriminated the degree of toxicity between sludge sources; 72h-$EC_{50}$ values were 1.83% for leather processing waste sludge, 16.75% for dye production waste sludge and 27.75% for textile production waste sludge. Even the laboratory culture methods of the species were not generally established yet, the species has high potential as the standard test species for marine toxicity test in terms of the dual reflection of phyto- and zooplankton toxicity from single test, sensitivity and test replicability.

• Journal of Life Science
• /
• v.30 no.4
• /
• pp.321-330
• /
• 2020

The aim of this study was to investigate the effect of copper (II) chloride (CuCl₂) on zebrafish. Zebrafish were exposed to various CuCl₂ concentrations and subjected to different exposure times to determine the median lethal concentration (LC₅₀) values. To evaluate stress responses, we measured whole-body cortisol levels and behavioral parameters using the open field test (OFT) or the novel tank test (NTT). The zebrafish were exposed to CuCl₂ solution at concentrations of 1.5-150 ㎍/l or a vehicle for 1 hr before behavioral tests or sample collection for whole-body cortisol. The LC₅₀ values were 30.3, 25.3, and 14.8 ㎍/l at 24, 48, and 96 hr, respectively. The NTT showed that mobility, velocity, and distance covered were significantly lower in zebrafish exposed to CuCl₂ than in the control group (p<0.05), while the turn angle was significantly higher in zebrafish exposed to a CuCl₂ concentration of 150 ㎍/l than in the control group (p<0.05). The OFT also showed that mobility, velocity, and distance covered were significantly lower and the turn angle and meandering were significantly higher in zebrafish exposed to all concentrations of CuCl₂ than in the control group (p<0.05). The whole-body cortisol levels were significantly higher in zebrafish exposed to CuCl₂ than in the control group (p<0.05). These results suggest that exposure to lethal CuCl₂ concentrations induces an intense toxic and stress response in zebrafish, causing behavioral changes and increasing whole-body cortisol levels.

• Corrosion Science and Technology
• /
• v.10 no.4
• /
• pp.109-117
• /
• 2011

The Korean Peninsula is located in the middle latitude of the northern hemisphere and has a clear 4-seasons and shows the typical temperate climate. Because of seasonal winds, it is cold and dry by a northwestern wind in the winter and it is hot and humid by a southeast wind in the summer. Also, temperature difference between the winter and the summer is large and it shows a rainy season from June to July but recently this regular trend may be greatly changed by an unusual weather phenomena. Since the Peninsula is east high west low type, the climate is complicated too. Because these geographical and climate characteristics can affect the properties of corrosion of metals and alloys, a systematic research on atmospheric corrosion in the Peninsula is required to understand and control the corrosion behavior of the industrial facilities. This paper analyzed the atmospheric corrosion factors for several environments in the Korean Peninsula and categorized the corrosivity of atmospheric corrosion of metals and alloys on the base of the related ISO standards. Annual pH values of rain showed the range of 4.5~5.5 in Korean Peninsula from 1999 to 2009 and coastal area showed relatively the low pH's rain. Annual $SO_2$ concentrations is reduced with time and its concentrations of every major cities were below the air quality standard, but $NO_2$concentration revealed a steady state and its concentration of Seoul has been over air quality standard. In 2007, $SO_2$classes of each sites were in $P_0{\sim}P_1$, and chloride classes were in $S_0{\sim}S_1$, and TOW classes were in ${\tau}_3{\sim}{\tau}_4$.That is, $SO_2$ and chloride classes were low but TOW class was high in Korean Peninsula. On the base of these environmental classes, corrosivity of carbon steel, zinc, copper, aluminium can be calculated that carbon steel was in C2-C3 classes and it was classified as low-medium, and zinc, copper, and aluminium showed C3 class and it was classified as medium.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.4
• /
• pp.414-420
• /
• 2009

We dyed traditional Korean hand-made papers (Hanji) with colorants extracted from fruits of Alnus japonica to investigate the effect of various dyeing factors (mordant, dye concentration and dyeing assistant) on colors, K/S values and light fastness of the dyed Hanji. The dyed hanji had brown color. The K/S value of dyed Hanji was increased by mordanting with alum and copper acetate. $a^*$ and $b^*$ value of dyed Hanji was decreased slightly by mordanting with alum and Iron(II) chloride. The K/S value and $b^*$ of dyed Hanji increased with increasing concentration of dye, but $L^*$ value of dyed Hanji decreased. The K/S value of dyed Hanji was also increased by fixing agent. When Hanji was mordanted with Iron(II) chloride and was not mordanted, use of fixing agent resulted in greater increase of K/S value. Use of fixing agent resulted in poor light fastness. When fixing agent was used, mordanting with copper acetate resulted in smaller color difference than mordanting with alum after aging test.

• Korean Journal of Crystallography
• /
• v.16 no.2
• /
• pp.107-127
• /
• 2005

Five Cu(II) compounds were obtained from different copper salts with btp ligands, and their structures were determined by X-ray crystallography. The structure of coordination polymer 2 contains btp-bridged tetranuclear Cu(II) units weakly connected by nitrate ions, and the structure of a discrete Cu(II) molecule 1 contains acetates and btp ligands. With perchlorate anions, two btp ligands bridge Cu(II) ions to form a double zigzag chain 3, while a single zigzag chain 4 is created with sulfate anions. The reaction of $Cu(NO_{3})_{2}$ containing $NH_{4}PF_{6}$ with btp ligands also produced a polymeric compound 5 containing $Cu(H_{2}O)_{2}^{2+}$ and $Cu(NO_{3})_{2}$ units alternatively bridged by btp ligands with H-bonds between copper bonded water and nitrate oxygen atoms. Five Zn(II) compounds were obtained from different zinc salts with btp ligands, and the structures of polymeric compounds (6, 7 and 8) and monomeric compounds (9 and 10) were determined by X-ray crystallography. With nitrate, chloride and bromide anions, btp ligands bridge Zn(II) ions to form polymeric compounds (6, 7 and 8), but btp ligands coordinate to a Zn(II) ion to form monomeric complexes (9 and 10) with $PF_{6}^{-}$ and perchlorate anions. Four silver salts and btp ligands produced two kinds of structures, dinuclear 20-membered rings and one-dimensional zigzag chain depending on different anions. For $ClO_{4}^{-}$ and OTf anions, weak interactions between Ag(I) and anions make dinuclear 20-membered rings construct polymeric compounds (11 and 13). For $PF_{6}^{-}$ anion, there are also weak interactions between Ag(I) and $F(PF_{6}^{-})(12)$, but they do not construct a polymeric compound. For $O_{2}CCF_{3}^{-}$ anion, btp ligands bridge Ag(I) atoms to make one-dimensional zigzag chain (14), and there are also interactions between Ag(I) and anions.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.9
• /
• pp.1439-1444
• /
• 2006

A $Cu^{2+}$ ion-selective membrane microelectrode has been fabricated from poly vinyl chloride (PVC) matrix membrane containing a new symmetrical hexadentate Schiff,s base 2-{1-(E)-2-((Z)-2-{(E)-2-[(Z)-1-(2-hydroxyphenyl)ethylidene]hydrazono}-1-methylpropylidene)hydrazono]ethyl}phenol (HDNOS) as a neutral carrier, Potassium tetrakis(4-chlorophenyl) borate (KTpClPB) as an anionic excluder and o-nitrophenyloctyl ether (NPOE) as a plasticizing solvent mediator. The microelectrode displays linear potential response in the concentration range of $1.0\;{\times}\;10^{-5}-1.0\;{\times}\;10^{-11}$ M of $Cu^{2+}$. The microelectrode exhibits a nice Nernstian slope of 25.9 ${\pm}$ 0.3 mV $decade^{-1}$ in the pH range of 3.1-8.1. The sensor has a relatively short response time in whole concentration ranges ($\sim$5 s). The detection limit of proposed sensor is $5.0\;{\times}\;10^{-12}$ M (320 pg/L), and it can be used over a period of eight weeks. The practical utility of the sensor has been demonstrated by using it as an indicator electrode in the potentiometric titration of $Cu^{2+}$ with EDTA. The proposed membrane electrode was used for the direct determining of $Cu^{2+}$ content in black and red pepper, and in waste water samples.

• Food Science and Biotechnology
• /
• v.17 no.5
• /
• pp.971-975
• /
• 2008

This study was to examine the potential disinfection efficiencies of 10 compounds by determining their antimicrobial capacity and ichthyotoxicity. Antimicrobial effects against Vibrio sp., Edwadsiella tarda, Streptococcus sp., and Staphylococcus sp. were tested using 10 different disinfectants; hydrogen peroxide, sodium hypochlorite, chlorine dioxide, povidon iodine, formaldehyde, glutaraldehyde, quaternary ammonium compounds (QACs), didecyl dimethyl ammonium chloride (DDAC), ortho-dichlorobenzen, and copper sulfate. Chlorine dioxide ($ClO_2$) containing 5% $ClO_2$ and copper sulfate had no effects on bactericidal activity, while the other disinfectants resulted in 99.99% bactericidal activity against 4 strains of fish pathogenic bacteria. The ichthyotoxicity of the 10 disinfectants was investigated using 3 kinds of fish species; flounder (Paralichthys olivaceus), rockfish (Sebastes pachycephalus), and black sea bream (Acanthopagrus schlegelii). Median lethal concentration ($LC_{50}$) values of the 10 disinfectants were estimated to determine toxicity ranges of the doses within 24 hr. Among test disinfectant solutions, hydrogen peroxide showed the highest $LC_50$ in flounder (201.3), rockfish (269.7), and black sea bream (139.3 ppm). DDAC revealed the lowest $LC_{50}$ in flounder (2.1), rockfish (1.0), and black sea bream (1.5 ppm). These results suggest that DDAC, quaternary ammonium compounds, glutaraldehyde, and sodium hypochlorite are effective disinfectants for fish and bacterial species examined in this study.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.5
• /
• pp.536-541
• /
• 2015

Copper has been used extensively as an electric wire or as a base material in various types of machineries owing to its good electrical and thermal conductivity and good fabricating property, as well as its good corrosion resistance compared to iron. Furthermore, the copper-nickel alloy has significant corrosion resistance in severely corrosive environments. Although, cupro-nickel alloy shows better corrosion resistance than the brass and bronze series, this alloy also corroded in severely corrosive environments, including aggressive chloride ions, dissolved oxygen, and condition of fast flowing seawater. In this study, and annealing treatment at various annealing temperatures was carried out on the cupro-nickel (Cu-10%Ni) alloy, and the effects of annealing were investigated using electrochemical methods, such as measuring the polarization and impedance behaviors under flowing seawater conditions. The corrosion resistance increased by annealing compared to non heat treatment in the absence of flowing seawater. In particular, the sample annealed at $200^{\circ}C$ exhibited the best corrosion resistance. The impedance in the presence of flowing seawater showed higher values than in the absence of flowing seawater. Furthermore, the highest impedances was observed in the sample annealed at $800^{\circ}C$, irrespective of the present of flowing seawater. Consequently, the corrosion resistance of cupro-nickel (Cu-10%Ni) alloy in a severely corrosive environment can be improved somewhat by annealing.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.7
• /
• pp.942-952
• /
• 2013

Monoliths are functional porous materials with a three-dimensional continuous interconnected pore structure in a single piece. A monolith with uniform shape based on poly(${\gamma}$-glutamic acid) (PGA) has been prepared via a thermally induced phase separation technique using a mixture of dimethyl sulfoxide, water, and ethanol as solvent. The morphology of the obtained monolith was observed by scanning electron microscopy and the surface area of the monolith was evaluated by the Brunauer Emmett Teller method. The effects of fabrication parameters such as the concentration and molecular mass of PGA and the solvent composition have been systematically investigated. The PGA monolith was cross-linked with hexamethylene diisocyanate to produce the water-insoluble monolith. The addition of sodium chloride to the phase separation solvent affected the properties of the cross-linked monolith. The swelling ratio of the cross-linked monolith toward aqueous solutions depended on the buffer pH as well as the monolith fabrication condition. Copper(II) ion was efficiently adsorbed on the cross-linked PGA monolith, and the obtained copper-immobilized monolith showed strong antibacterial activity for Escherichia coli. By combination of the characteristic properties of PGA (e.g., high biocompatibility and biodegradability) and the unique features of monoliths (e.g., through-pore structure, large surface area, and high porosity with small pore size), the PGA monolith possesses large potentials for various industrial applications in the biomedical, environmental, analytical, and separation fields.