• Analytical Science and Technology
• /
• v.27 no.5
• /
• pp.228-233
• /
• 2014

Electrospun polymeric nanofibers have been extensively studied for biomedical materials because of their unique structures and relatively easy fabrication with biocompatible polymers. The amount of surface exposed amine groups increases as the blend ratio of block copolymer increases. Cell attachments on the nanofibers change according to the ratio of the block copolymer ((Poly(e-caprolactone, PCL), Poly(e-caprolactone)-Poly (ethylen glycol-$NH_2$)) in the blend. We assume that the PEG and amine moiety plays a significant role in biocompatibility of nanofiber surfaces. Collagen was used as a grafting material on the composite nanofibers to enhance the cell adhesion because the collagen is a major constituent of connective tissue.

• Applied Chemistry for Engineering
• /
• v.7 no.4
• /
• pp.757-767
• /
• 1996

Poly(alkyl acrylate-g-caprolactone) graft copolymers were prepared, and they were applied as compatibilizing agents for polycarbonate (PC) / poly(acrylonitrile-butadiene-styrene) (ABS) blends. The incompatible poly(alkyl acrylate) segment was incorporated into the graft copolymer in order to localize the copolymer at the PC/ABS interface. The blend containing 1 phr of the copolymer showed remarkable improvement in impact strength as well as in elongation at break. Impact improvement was more pronounced with a thinner test specimens of 1/8 inch thickness. Morphological study showed that the presence of the graft copolymer led to a smoother PC/ABS interface due to the interfacial enrichment of the graft copolymer.

• Polymer(Korea)
• /
• v.26 no.4
• /
• pp.543-550
• /
• 2002

We have synthesized a novel carrier transporting copolymer having triphenylamine moiety as a hole transporting unit and triazine moiety as an electron transporting unit in the polymer side chain. Single-layered organic electroluminescent (EL) devices consisted of ITO/copolymer and emitting materials (DCM, coumarin 6, DPvBi)/Al exhibited maximum external quantum efficiency when the ratio of hole transporting unit and electron transporting unit is 6:4 and the content of emitting material is 30 wt%. Especially, the devices emitted the light of red (620 nm), green (520 nm) and blue (450 nm) corresponding to the emitting materials, respectively. A maximum luminance of ITO/copolymer (6:4) and DCM (30 wt%)/Al EL device was about 500 cd/$m^2$ at a DC drive voltage of 12V.

• Macromolecular Research
• /
• v.14 no.5
• /
• pp.517-523
• /
• 2006

The effects of particle content, size and shape on the thermal conductivity (k) and adhesion properties of thermally conductive, pressure-sensitive adhesives (PSAs) were investigated. The matrix resins were thermally crosslinkable, 2-ethylhexyl acrylic polyol and ultraviolet (UV)-curable, random copolymer consisting of acrylic oligomer and various acrylates. We found that k increased with increasing diameter and particle aspect ratio, and was further enhanced due to the reduction of the interfacial thermal barrier when the coupling agent, which increases the adhesion between particles and the matrix resin, was used. On the other hand, adhesion properties such as peel strength and tack of the thermally crosslinkable resin decreased sharply with increasing particle content. However, for UV curable resin, increased particle addition inhibited the decrease in adhesion properties.

• Macromolecular Research
• /
• v.17 no.6
• /
• pp.365-377
• /
• 2009

In this feature article, we briefly review the new methods we have utilized recently in the investigation of morphology and phase behavior of block copolymers. We first describe the chromatographic fractionation method to purify block copolymers from their side products of mainly homopolymers or block copolymer precursors inadvertently terminated upon addition of the next monomer in the sequential anionic polymerization. The chromatographic method is extended to the fractionation of the individual block of diblock copolymers which can yield the diblock copolymer fractions of different composition and molecular weight, which also have narrower distributions in both molecular weight and composition. A more detailed phase diagram could be constructed from the set of block copolymer fractions without the need of acquiring many block copolymers each prepared by anionic polymerization. The fractions with narrow distribution in both molecular weight and composition exhibit better long-range ordering and sharper phase transition. Next, epitaxial relationships between two ordered structures in block copolymer thin film is discussed. We employed the direct visualization method, transmission electron microtomography(TEMT) to scrutinize the grain boundary structure.

• Journal of Environmental Science International
• /
• v.13 no.10
• /
• pp.947-953
• /
• 2004

Waterborne fluorinated acrylate copolymer (WFAC) for surface modification of textile was synthesized from perfluoroalkyl ethyl acrylate, octadecyl acrylate, glycidyl methacrylate, surfactant and 3,3 methyl-methoxy butanol. The structures of the synthesized WFAC were determinated by FT-IR and $^{19}F-NMR$ analysis. The thermal stability investigated with DSC and TGA was decreased with increasing the content of fluorinated acrylate in the copolymer. However, the particle sizes of WFAC were increased with increasing the content of fluorinated acrylate in the copolymer. The surface energies calculated by contact angles of WFAC were in the range of 29.80$\~$13.41 dyne/cm. On the observing SEM of the textile surface treated with WFAC, the textile was swollen and compacted with increasing the concentration of water repellency agent. WFAC synthesized in this study showed a good water repellency.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.5
• /
• pp.795-799
• /
• 2007

The bulk properties of poly(γ-benzyl-L-glutamate)-poly(ethylene glycol), PBLG-PEO, diblock copolymer were investigated. The helical transition from 7/2 to 13/5 for pure PBLG was at 120 oC while those of GE-1 and GE-2, which contain flexible PEO block 40 wt% and 60 wt% respectively, were shown at 135℃ on DSC experiments. FT-IR and XRD experiments were shown that the diblock copolymers maintained their α-helical structure in the temperature range between 25℃ and 175℃. Increasing relative size of coil part resulted in the increase of intermolecular packing distances. Due to well-maintained helical structure, lyotropic LC phases were observed for the PBLG-PEO block copolymer by the polarized optical microscope (POM). Especially, GE-3 copolymer, which has 12.5 wt% PEO contents, showed the smectic C phase. The competition of favorable aggregation energy between rod-rod and coil-coil, and unfavorable aggregation energy of rod-coil give rise to change the supramolecular structure in mixed solvent.

• Macromolecular Research
• /
• v.10 no.6
• /
• pp.325-331
• /
• 2002

Phase behavior of a PEO-PPO-PEO (Pluronic P103) triblock copolymer in water is investigated using small-angle neutron scattering (SANS), small-angle X-ray scattering (SAXS), dynamic light scattering (DLS) and rheology. Pluronic P103 shows apparent two gel states in different temperature regions. The first sol-to-gel transition at a lower temperature (i.e., the hard gel I state) turns out to be the hexagonal microphase as evidenced by the combined SANS and SAXS and the frequency dependence of both G′ and G" in rheology. In contrast to the hard gel I, the second sol-to-gel transition (i. e., the hard gel II state) at a higher temperature represents the block copolymer micelles in somewhat disordered state rather than the ordered state seen in the hard gel I. Moreover, turbidity change depending only on the temperature with four distinct regions is observed and the large aggregates with size larger than 5,000 nm are detected with DLS in the turbid solution region. Based upon the present study, two different gelation mechanisms for aqueous PEO-PPO-PEO triblock copolymer solutions are proposed.

• Macromolecular Research
• /
• v.16 no.2
• /
• pp.103-107
• /
• 2008

Carbon nanodots were prepared by the pyrolysis of a triblock copolymer. The triblock copolymer, poly(methyl methacrylate)-b-polystyrene-b-poly(methyl methacrylate) was synthesized by atom transfer radical polymerization using an initiator containing a diacetylene group. A polymer thin film on a mica substrate was prepared by spin-casting at 2,000 rpm from a 0.5 wt% toluene solution of the triblock copolymer. After drying, the cast film was vacuum-annealed for 48 h at $160^{\circ}C$. The annealed film formed a spherical morphology of polystyrene domains with a diameter of approximately 30 nm. The film was exposed to UV irradiation to induce a cross-linking reaction between diacetylene groups. In the subsequent pyrolysis at $800^{\circ}C$, the cross-linked polystyrene spheres were carbonized and the poly(methyl methacrylate) matrix was eliminated, resulting in carbon nanodots deposited on a substrate with a diameter of approximately 5 mn.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.2
• /
• pp.102-105
• /
• 1987

2-Methoxy-6-methyl-3,4-dihydro-2H-pyran ($1_a$), 2-ethoxy-3,6-dimethyl-3,4-dihydro-2H-pyran ($1_b$), and 2-ethoxy-3-methyl-6-ethyl-3,4-dihydro-2H-pyran ($1_c$) were prepared by (4 + 2) cycloaddition reaction from the corresponding vinyl ketones and alkyl vinyl ethers. Compounds $1_{a-c}$ were ring-open polymerized by cationic catalyst to obtain alternating head-to-head (H-H) copolymers. For comparison, copolymer of head-to-tail (H-T) was also prepared by free radical copolymerization of the mixture of the corresponding monomers. The H-H copolymer exhibited some differences in its $^1H$ NMR and IR spectra. However, significant differences were showed between the H-H and H-T copolymers in the $^{13}C$ NMR spectra. Also noteworthy was that$T_g$ value of H-H copolymer was higher than that of the corresponding H-T structure. Decomposition temperature of the H-H copolymer was lower than that of the H-T copolymer. All the H-H and H-T copolymers were soluble in common solvents.