• 대한영양사협회학술지
• /
• 제7권1호
• /
• pp.87-104
• /
• 2001

This study was conducted as a part of the project developing the standards of national board test for the dietitian's licence. The purpose of this study was to define the job description of dietitians, and to describe the task elements based on the detailed analysis of the dietitians' work. This study team established the research team which was composed of food and nutrition experts, 7 of registered dietitians and 3 of university professors. Draft job description form was made to fully explain the dietitians' task elements, process and sequence by the research team. Final job description form was confirmed after the validity of 576 task elements was reevaluated upon 4 point scale test based on the frequency, importance, and difficulty by 21 field registered dietitian by the study team. It was also confirmed by the university. This form was formated by following DACUM method which analyzed the job description containing duty, task and task elements. It was organized to include every dietitians' work and to describe the every detailed process of work. Duty was defined as the specific and independent work as a dietitian, and was composed of 17 parts, i.e 10 parts in food supply management area and 6 parts in nutritional care service area and self promotion area. Duties were also divided into 99 tasks containing the 576 detailed task elements to describe definite action, steps and decisions. Seventeen parts are following; menu planning, storage and inventory control, food production, meal service, waste management, sanitation, equipment and facility management, human resource management, financial management, nutrition assessment of life cycle, nutritional assessment of several disease, nutritional assessment in specific condition, medical nutrition therapy, nutritional education, public health nutrition and self promotion. If these protocols are properly performed and presented, they can provide the likelihood that dietetics professionals work as a primary contributors in promoting health care and preventing disease nationally.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.690-693
• /
• 2002

According to the growth of communication biz, embedded market rapidly developing in domestic and overseas. Embedded system can be used in various way such as wire and wireless communication equipment or information products. There are lots of developing performance applying speech recognition to embedded system, for instance, PDA, PCS, CDMA-2000 or IMT-2000. This study implement minimum memory of speech recognition engine and DB for apply real time embedded system. The implement measure of speech recognition equipment to fit on embedded system is like following. At first, DC element is removed from Input voice and then a compensation of high frequency was achieved by pre-emphasis with coefficients value, 0.97 and constitute division data as same size as 256 sample by lapped shift method. Through by Levinson - Durbin Algorithm, these data can get linear predictive coefficient and again, using Cepstrum - Transformer attain feature vectors. During HMM training, We used Baum-Welch reestimation Algorithm for each words training and can get the recognition result from executed likelihood method on each words. The used speech data is using 40 speech command data and 10 digits extracted form each 15 of male and female speaker spoken menu control command of Embedded system. Since, in many times, ARM CPU is adopted in embedded system, it's peformed porting the speech recognition engine on ARM core evaluation board. And do the recognition test with select set 1 and set 3 parameter that has good recognition rate on commander and no digit after the several tests using by 5 proposal recognition parameter sets. The recognition engine of recognition rate shows 95%, speech commander recognizer shows 96% and digits recognizer shows 94%.

• 대한전자공학회논문지
• /
• 제19권3호
• /
• pp.19-27
• /
• 1982

LSI, 프린트 기판등의 배치 문제에 있어서의 목적 함수로써 총배선장의 최소화, 통과선선의 최소화가 지금까지 채용되어 왔었다. 이 목적 함수는 layout의 궁극적인 목표(100% 결선률)를 대국적으로는 반영하고 있다고 말할 수 있지만 국기적으로 혼잡한 배선 상태를 나타내고 있지 않기 때문에 목적 함수로써 불충분한 경우가 많이 보여 지고 있다. 본 논문에서는 국소적인 배선 혼잡도를 나타내기 위해 쎄그먼트(segment) 혼잡도라고 하는 새로운 개념을 도입하여 이 쎄그먼트 혼잡도를 최소로 하는 것을 목적 함수로 하는 것을 제안하였다. 그리고 이 목적 함수를 최적화 하기 위해 능률 좋은 휴리스틱 알고리즘을 제안하고 프로그램 실험에 의해 그 유용성을 확인하였다. 쎄그먼트 혼잡도의 최대치는 총배선장이 짧게 되면 적게 되고 총배선장이 길게 되면 크게 되는 것이 실험의 결과로 얻어져 총배선장을 ?게 하고 동시에 쌔그먼트 혼잡도의 최대치를 적게 하는 제어 파라미터 (혼잡도 Parameter)의 값의 범위를 실험적으로 구하였다.

• 한국정보통신학회논문지
• /
• 제21권6호
• /
• pp.1225-1230
• /
• 2017

3D 프린터는 산업용을 중심으로 성장해 왔으나 최근 경제 효과 및 기술 발달로 인한 원가 절감 등으로 인해 개인용 3D 프린터 시장의 성장이 가속화되는 추세이다. 그러나 현재 보급되고 있는 3D 개인용 프린터는 조형 속도, 크기, 정밀도 등의 한계점에 따라 소비자 만족도가 매우 낮은 편이다. 따라서 본 논문에서는 이러한 개인용 3D 프린터의 기술적 한계를 극복하기 위해 LSU를 이용한 SLA 방식의 3D 프린터를 제안하였다. 그리고 핵심 기능을 담당하는 스캐닝 기구부의 동작을 확인하기 위해 스테핑 모터를 이용한 조형판의 이동 및 레이저 출력 테스트를 시행하였다. 해당 테스트를 통해 레이저 동작 및 제어가 가능한지 확인하였으며 아울러 레이저 모듈과 폴리곤 미러를 사용하여 X축에 일정한 점이 출력됨을 확인하였다. 제안하는 3D프린터는 정밀도와 제조 속도를 개선하여 기존의 보급 형 3D프린터를 대체할 수 있을 것으로 기대한다.

• 문화기술의 융합
• /
• 제4권3호
• /
• pp.293-298
• /
• 2018

스마트폰 사용의 대중화로 촉발된 4차 산업혁명시대에는, 인간의 일상생활과 모든 산업현장이 소프트웨어화 및 지능화되어 가고 있다. 2018년부터 전국 모든 학생을 대상으로 소프트웨어 보편교육을 실시함에 따라, 수요가 폭증하고 소프트웨어 기술과 아두이노를 활용하여 하드웨어를 연동하고 있다. 그러나 고비용의 콘트롤 보드와 수십 종에 이르는 다양한 전자부품을 별도로 준비해야 하고 문제가 발생하고 있다. 또한 동일한 실습교육을 반복 실시할 경우, 상당히 많은 부품이 분실되거나 망가진다. 새롭게 수업을 시작할 상태로 준비하는 것도 매우 심각한 문제가 되고 있다. 본 연구에서는 아두이노 보드와 각종 전자부품들을 가상화 기술을 기반으로 VR기술로 구현한다. 또한 3D 그래픽 실감형 아두이노 키트와 각종 전자부품들을 API 형태로 제공한다. 가상화 기반에서 소프트웨어와 가상의 하드웨어를 연동하여 처리하는 방안을 제안한다.

• 대한지역사회영양학회지
• /
• 제6권2호
• /
• pp.234-242
• /
• 2001

This study was aimed at development of a nutrition education program, which was designed for children, their parents and personnel in preschool nursery facilities and carried out by dieticians. The program was conducted at 6 preschool nursery facilities for 3 months from July to September 1998. Four-hundred thirty-three children aged 2 to 7 years were engaged in the program. Children in each class were given nutrition education practice once a week by dieticians using education materials and a guide book based on a 12-week program. The themes of nutrition education for children consisted of 'knowledge of food sources and foods', 'relations between food and health', 'other roles of food', 'right eating habit', and 'cooking practice'. Each of five leaflets on nutrition education for parents was delivered eery three weeks in a series and leaflets were posted on a bulletin board. Nursery school teachers were educated by their participation in the class with dieticians using education materials. Evaluation of nutrition education by children, parents and personnel was carried out by interviewing and using questionnaires before and after the program. Children responded more positively more positively on their eating behavior and sanitary behaviors after nutrition education. Parents'opinions on the nutrition education program were positive : 72.3 described the nutrition education program as 'very good'and 'good'. In addition, 71.3% answered that the education materials for parents were helpful. A majority(93.8%) of personnel in facilities evaluated the nutrition education program effective. Nursery personnel evaluated the importance of general nutrition knowledge, childhood nutrition, and obesity control for nutrition management and nutrition education more highly after nutrition education. This study indicates that nutrition management and nutrition education programs for preschool nursery facilities are necessary and they would be effective when implemented by dieticians.

• 대한전자공학회논문지TC
• /
• 제38권6호
• /
• pp.11-17
• /
• 2001

본 논문에서는 고속 무선 LAN을 위한 MAC 프로토콜 프로세서 프로토타입의 설계 및 구현에 관해 기술하였다. 설계된 프로토콜 프로세서는 5GHz OFDM 물리계층과 인터페이스를 가진다. 먼저 IEEE 802.11 무선 LAN의 MAC 프로토콜 분석을 토대로 하드웨어와 펌웨어로 구현할 MAC 프로토콜 기능들을 분리하고 프레임 단위의 송수신 요구 처리가 가능한 RISC 프로세서와의 인터페이스 및 OFDM 물리계층과의 직렬전송 인터페이스를 설계하였다. 또한， MAC 프로토콜의 고속 처리를 위해 프로토콜 제어기능 및 송수신 기능을 하드웨어로 구현하였다. 개발된 MAC 하드웨어 블록은 10 MHz 주클록에서 동작하며, 이는 물리계층과의 정보교환이 옥텟 단위임을 고려할 때 물리계층에서의 속도 80Mbps에 해당한다. 설계된 FPGA MAC 기능 칩은 역시 본 연구에서 개발된 무선 LAN 시스템 프로토타입 보드에 실장되며, 다양한 DCF 기능에 대한 검증 결과 정상적으로 동작함을 확인하였다.

• 수산해양기술연구
• /
• 제43권2호
• /
• pp.140-148
• /
• 2007

This paper describes on the real-time monitoring of dredging information for grab bucket dredger equipped with winch control sensors and differential global positioning system(DGPS) using electronic chart display and information system(ECDIS). The experiment was carried out at Gwangyang Hang and Gangwon-do Oho-ri on board M/V Kunwoong G-16. ECDIS system monitors consecutively the dredging's position, heading and shooting point of grab bucket in real-time through 3 DGPS attached to the top bridge of the dredger and crane frame. Dredging depth was measured by 2 up/down counter fitted with crane winch of the dredger. The depth and area of dredging in each shooting point of grab bucket are displayed in color band. The efficiency of its operation can be ensured by adjusting the tidal data in real-time and displaying the depth of dredging on the ECDIS monitor. The reliance for verification of dredging operation as well as supervision of dredging process was greatly enhanced by providing three-dimensional map with variation of dredging depth in real time. The results will contribute to establishing the system which can monitor and record the whole dredging operations in real-time as well as verify the result of dredging quantitatively.

• 한국세라믹학회지
• /
• 제47권3호
• /
• pp.223-231
• /
• 2010

The serious issue of tall building is to ensure the fire-resistance of high strength concrete. The fire resistant finishing method is necessarily essential in order to satisfy the fire resistance time of 3 h required by the law. The fire resistant finishing method is installed by applying a fire resistant material as a method of shotcrete or a fire resistant board to high strength concrete surface. This method can reduce the temperature increase of the reinforcement embedded in high strength concrete at high temperature due to the installation thickness control. This study is interested in identifying the effectiveness of inorganic alumino-silicate compounds including the inorganic admixture such as fly ash and meta-kaolin as the fire resistant finishing materials through the analysis of fire resistance and components properties at high temperature. The study results show that the fire resistant finishing material composed of fly ash and meta-kaolin has the thermal stability of the slight decrease of compressive strength at high temperature. These thermal stability is caused by the ceramic binding capacity induced by alkali activation reaction by the reason of the thermal analysis result not showing the decomposition of calcium hydrate. Inorganic compounds composed of fly ash and meta-kaolin is evaluated to be very effective as the fire resistance material for finishing to protect the concrete substrate by the reason of those simplicity in both application and manufacture. The additional study about the adhesion in the interface with concrete substrate is necessary for the purpose of the practical application.

• International Journal of Precision Engineering and Manufacturing
• /
• 제4권5호
• /
• pp.27-33
• /
• 2003

G-code, another name of ISO6983, has been a popular commanding language for operating machine tools. This G-code, however, limits the usage of today's fast evolving high-performance hardware. For intelligent machines, the communications between machine and CAD/CAM departments become important, but the loss of information during generating G-code makes the production department isolated. The new standard for operating machine tools, named STEP-NC is just about to be standardized as ISO14649. As this new standard stores CAD/CAM information as well as operation commands of CNC machines, and this characteristic makes this machine able to exchange information with other departments. In this research, the new CNC machine operated by STEP-NC was built and tested. Unlike other prototypes of STEP-NC milling machines, this system uses the STEP-NC file in XML file form as data input. This machine loads information from XML file and deals with XML file structure. It is possible for this machine to exchange information to other databases using XML. The STEP-NC milling machines in this research loads information from the XML file, makes tool paths for two5D features with information of STEP-NC, and machines automatically without making G-code. All software is programmed with Visual $C^{++}$, and the milling machine is built with table milling machine, step motors, and motion control board for PC that can be directly controlled by Visual $C^{++}$ commands. All software and hardware modules are independent from each other; it allows convenient substitution and expansion of the milling machine. Example 1 in ISO14649-11 having the full geometry and machining information and example 2 having only the geometry and tool information were used to test the automatic machining capability of this system.