• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.3
• /
• pp.19-27
• /
• 1982

Minimization of total routing and number of cuts has been adopted for the placement problem in LSI and printed wire board as the object function, recently. Although it is considered that in the general situation this object function reflects the final goal which is wiring of 100% of layout, it often seems to be insufficient because it does not exhibit partial wire congestion. This paper introduces a new concept called the wire congestion of segestion to get the partial wire congestion and proposes the object function to minimize the wire congestion of segmests. In order to optimize this object function, an effective heuristic algorithm is also suggestsl Experimental results show that this algorithm sustains its efficiency. The experimental consequences point out that if the total routing length is short, maximum wire congestion of segment is small and vice versa. Therefore control parameter, that is, congestion parameter, which mintnizes total length and concurrently reduces maximal wire congestion of segment, is obtained by experiment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.6
• /
• pp.1225-1230
• /
• 2017

3D printers have been growing mainly in industrial use, but the recent growth of the personal 3D printer market advanced through economic effects and cost reduction due to technological development. However, current 3D personal printers are very low in customer satisfaction on the limitations of molding speed, size, and precision. In this paper, we propose SLA 3D printer using LSU to overcome the technical limitation of personal 3D printer. In order to verify the operation of the scanning mechanism which is responsible for core functions, the movement of molding board using stepping motor and laser output test was conducted. These tests ensure that the laser was operating and control well was confirmed that a certain point is output to the X-axis by means of a laser module and a polygon mirror. 3D printers which are proposed to improve the accuracy and manufacturing speed is expected to replace the traditional low-budget 3D printer.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.3
• /
• pp.293-298
• /
• 2018

In the fourth industrial revolution era triggered by the popularization of smart phones, Human daily life and all industrial sites are becoming software and intelligent. With the universal software education for all students nationwide from 2018, Demand is surging, and hardware is interlocked using software technology and Arduino. However, expensive control boards and dozens of different electronic components have to be prepared separately and problems are occurring. In addition, if the same training is repeated, Significantly many parts are lost or destroyed. Being prepared to start a new class is also becoming a very serious problem. In this study, we implement VR technology based on virtualization technology of Arduino board and various electronic parts. In addition, 3D graphics realistic Arduino kit and various electronic components are provided in API form. In this paper, we propose a method of interworking software and virtual hardware on virtualization base.

• Korean Journal of Community Nutrition
• /
• v.6 no.2
• /
• pp.234-242
• /
• 2001

This study was aimed at development of a nutrition education program, which was designed for children, their parents and personnel in preschool nursery facilities and carried out by dieticians. The program was conducted at 6 preschool nursery facilities for 3 months from July to September 1998. Four-hundred thirty-three children aged 2 to 7 years were engaged in the program. Children in each class were given nutrition education practice once a week by dieticians using education materials and a guide book based on a 12-week program. The themes of nutrition education for children consisted of 'knowledge of food sources and foods', 'relations between food and health', 'other roles of food', 'right eating habit', and 'cooking practice'. Each of five leaflets on nutrition education for parents was delivered eery three weeks in a series and leaflets were posted on a bulletin board. Nursery school teachers were educated by their participation in the class with dieticians using education materials. Evaluation of nutrition education by children, parents and personnel was carried out by interviewing and using questionnaires before and after the program. Children responded more positively more positively on their eating behavior and sanitary behaviors after nutrition education. Parents'opinions on the nutrition education program were positive : 72.3 described the nutrition education program as 'very good'and 'good'. In addition, 71.3% answered that the education materials for parents were helpful. A majority(93.8%) of personnel in facilities evaluated the nutrition education program effective. Nursery personnel evaluated the importance of general nutrition knowledge, childhood nutrition, and obesity control for nutrition management and nutrition education more highly after nutrition education. This study indicates that nutrition management and nutrition education programs for preschool nursery facilities are necessary and they would be effective when implemented by dieticians.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.6
• /
• pp.11-17
• /
• 2001

Design and implementation of the MAC protocol processor prototype for high speed wireless LAN, which has interface with 5GHz OFDM PHY layer, is presented. We analyze the IEEE 802.11 MAC protocol specification and then separate the MAC protocol functions to be implemented by hardware and firmware and define the interface in which frames can be exchanged. That is, it is considered that high speed queue processing and interfaces with RISC processor and OFDM PHY layer. Protocol control and transmission/reception functions of the MAC functions are implemented in hardware in order to guarantee high speed processing in MAC layer. The developed MAC hardware block operates at 10MHz main clock. Therefore, transmission rate in PHY layer is about 80Mbps because data transmission/reception between MAC layer and PHY layer is performed as unit of octet. The designed FPGA MAC function chip has been implemented in wireless LAN test board and it is verified that DCF function is operated correctly.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.43 no.2
• /
• pp.140-148
• /
• 2007

This paper describes on the real-time monitoring of dredging information for grab bucket dredger equipped with winch control sensors and differential global positioning system(DGPS) using electronic chart display and information system(ECDIS). The experiment was carried out at Gwangyang Hang and Gangwon-do Oho-ri on board M/V Kunwoong G-16. ECDIS system monitors consecutively the dredging's position, heading and shooting point of grab bucket in real-time through 3 DGPS attached to the top bridge of the dredger and crane frame. Dredging depth was measured by 2 up/down counter fitted with crane winch of the dredger. The depth and area of dredging in each shooting point of grab bucket are displayed in color band. The efficiency of its operation can be ensured by adjusting the tidal data in real-time and displaying the depth of dredging on the ECDIS monitor. The reliance for verification of dredging operation as well as supervision of dredging process was greatly enhanced by providing three-dimensional map with variation of dredging depth in real time. The results will contribute to establishing the system which can monitor and record the whole dredging operations in real-time as well as verify the result of dredging quantitatively.

• Journal of the Korean Ceramic Society
• /
• v.47 no.3
• /
• pp.223-231
• /
• 2010

The serious issue of tall building is to ensure the fire-resistance of high strength concrete. The fire resistant finishing method is necessarily essential in order to satisfy the fire resistance time of 3 h required by the law. The fire resistant finishing method is installed by applying a fire resistant material as a method of shotcrete or a fire resistant board to high strength concrete surface. This method can reduce the temperature increase of the reinforcement embedded in high strength concrete at high temperature due to the installation thickness control. This study is interested in identifying the effectiveness of inorganic alumino-silicate compounds including the inorganic admixture such as fly ash and meta-kaolin as the fire resistant finishing materials through the analysis of fire resistance and components properties at high temperature. The study results show that the fire resistant finishing material composed of fly ash and meta-kaolin has the thermal stability of the slight decrease of compressive strength at high temperature. These thermal stability is caused by the ceramic binding capacity induced by alkali activation reaction by the reason of the thermal analysis result not showing the decomposition of calcium hydrate. Inorganic compounds composed of fly ash and meta-kaolin is evaluated to be very effective as the fire resistance material for finishing to protect the concrete substrate by the reason of those simplicity in both application and manufacture. The additional study about the adhesion in the interface with concrete substrate is necessary for the purpose of the practical application.

• International Journal of Precision Engineering and Manufacturing
• /
• v.4 no.5
• /
• pp.27-33
• /
• 2003

G-code, another name of ISO6983, has been a popular commanding language for operating machine tools. This G-code, however, limits the usage of today's fast evolving high-performance hardware. For intelligent machines, the communications between machine and CAD/CAM departments become important, but the loss of information during generating G-code makes the production department isolated. The new standard for operating machine tools, named STEP-NC is just about to be standardized as ISO14649. As this new standard stores CAD/CAM information as well as operation commands of CNC machines, and this characteristic makes this machine able to exchange information with other departments. In this research, the new CNC machine operated by STEP-NC was built and tested. Unlike other prototypes of STEP-NC milling machines, this system uses the STEP-NC file in XML file form as data input. This machine loads information from XML file and deals with XML file structure. It is possible for this machine to exchange information to other databases using XML. The STEP-NC milling machines in this research loads information from the XML file, makes tool paths for two5D features with information of STEP-NC, and machines automatically without making G-code. All software is programmed with Visual $C^{++}$, and the milling machine is built with table milling machine, step motors, and motion control board for PC that can be directly controlled by Visual $C^{++}$ commands. All software and hardware modules are independent from each other; it allows convenient substitution and expansion of the milling machine. Example 1 in ISO14649-11 having the full geometry and machining information and example 2 having only the geometry and tool information were used to test the automatic machining capability of this system.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.3
• /
• pp.30-37
• /
• 2006

The present study examined the formaldehyde (HCOH) emission characteristic of various wood-based panel used in interior design, and measured changes in formaldehyde emission when a number of VOC reduction methods were applied. Formaldehyde emission showed a clear tendency of increase with the rise of temperature, and the concentration of formaldehyde emitted changed according to the preprocessing condition before measuring. Formaldehyde emission from wood board after bake out treatment was lower than that of the control group. When specimens were coated with urethane, cashew, water, oil stain, they generally showed the decrease of formaldehyde emission, although varying according to finishing material, and when edge sealing was applied the decrease became significant. $TiO_2$ coating was more effective in decreasing formaldehyde under ultraviolet lamps than under ordinary lamps. When the irradiation of ultraviolet lamps gets longer, formaldehyde emission decreased.

• Bulletin of the Korean Space Science Society
• /
• 2011.04a
• /
• pp.24.4-24.4
• /
• 2011

Frozen orbit concept is very useful in designing particular mission orbits including the Sun-synchronous and minimum altitude variation orbits. In this work, variety of frozen and Sun-synchronous orbit conditions around the Moon is investigated and analyzed. The first two zonal harmonics of the Moon, J2 and J3, are considered to determine mean orbital elements to be a frozen orbit. To check the long-term behavior of a frozen orbit, formerly developed YonSei Precise Lunar Orbit Propagator (YSPLOP) is used. First, frozen orbit solutions without conditions to be the Sun-synchronous orbit is investigated. Various mean semi-major axes having between ranges from 1,788 km to 1,938 km with inclinations from 30 deg to 150 deg are considered. It is found that a polar orbit (90 deg of inclination) having 100 km of altitude requires the orbital eccentricity of about 0.01975 for a frozen orbit. Also, mean apolune and perilune altitudes for this case is about 136.301 km and 63.694 km, respectively. Second, frozen orbit solutions with additional condition to be the Sun-synchronous orbit is investigated. It is discovered that orbital inclinations are increased from 138.223 deg to 171.553 deg when mean altitude ranged from 50 km to 200 km. For the most usual mission altitude at the Moon (100 km), the Sun-synchronous orbit condition is satisfied with the eccentricity of 0.01124 and 145.235 deg of inclination. For this case, mean apolune and perilune altitudes are found to be about 120.677 km and 79.323 km, respectively. The results analyzed in this work could be useful to design a preliminary mapping orbit as well as to estimate basic on-board payloads' system requirements, for a future Korea's lunar orbiter mission. Other detailed perturbative effects should be considered in the further study, to analyze more accurate frozen orbit conditions at the Moon.