• 제목/요약/키워드: control and reduction of $CO_2$emissions

검색결과 37건 처리시간 0.031초

공기윤활평판실험에서 디지털 영상분석을 통한 윤활공기막 검출기법 (A Study on the Lubricating Air-layer Detection Techniques with Digital Image Analysis in Flat Plate Air Lubrication Test)

  • 박성현;이인원
    • 한국가시화정보학회지
    • /
    • 제14권1호
    • /
    • pp.27-32
    • /
    • 2016
  • The reduction of $CO_2$ emissions has been a key target in the Marine Industry since the IMO's Marine Environment Protection Committee published its findings in 2009. The representative emission index is termed as the EEDI (Energy Efficiency Design Index) for the new ships. Among various flow control techniques ever proposed, the air lubrication method is the one of most promising one in terms of practical applicability. The present study examines the basic characteristics of the flat plate test with intention of applying the air lubrication technology to the reduction of the resistance of a ship. Image analysis technique is proposed as a tool to quantify the effectiveness of the air lubrication method.

전자제어 디젤엔진의 흡기 다기관 및 연료분사장치 정비에 따른 매연 배출특성에 관한 연구 (Study on the Characteristics of Exhaust Emissions in accordance with the Intake Manifold and Fuel Injector Maintenance of the Electronic Control Diesel Engine)

  • 강현준;김태중
    • 한국산학기술학회논문지
    • /
    • 제17권9호
    • /
    • pp.196-205
    • /
    • 2016
  • 자동차로부터 배출되는 배기가스는 오존 및 미세먼지 등의 농도를 증가시켜 인체의 건강을 위협할 뿐만 아니라 지구 온난화 물질인 이산화탄소를 다량 배출하고 있어 지구 온난화에도 지대한 영향을 미치고 있다. 그래서 정부는 자동차에서 배출되는 배기가스를 효율적으로 규제하기 위한 제도로 운행차 배출가스 정밀검사 제도를 시행하고 있다. 자동차 배출가스를 줄이려는 연구는 다방면으로 이루어지고 있으며, 자동차의 배출가스 중 HC, NOx, $CO_2$ 등의 발생을 줄이기 위한 연구가 이루어지고 있다. 그러나 노후된 자동차에 대한 배출가스 저감에 대한 연구는 부족한 실정이다. 노후된 디젤자동차들이 운행차 배출가스 정밀검사를 만족하기 위해서는 흡기 다기관(manifold)과 인젝터의 카본퇴적물(Carbon sediment)을 세척하여 출력향상 및 배출가스 저감에 대한 연구가 필요하다. 따라서 본 연구에서는 차령 5년 이상, 주행거리 80,000 km 이상의 디젤자동차에 흡기 다기관 클리닝과 인젝터 클리닝을 동시에 수행하여 매연 발생에 미치는 영향을 비교 분석하였다. 실험결과, 흡기다기관 클리닝과 인젝터 클리닝을 동시 수행한 결과는 각각 수행한 결과보다 매연을 75.2% 감소시켰다. 또한, 흡기다기관 클리닝과 인젝터 클리닝을 동시 수행한 결과는 검사 후 8.5초부터 배출허용 기준 30%이하를 만족하였다.

A Switching Technique for Common Mode Voltage Reduction of 2-Level Inverter

  • Yun Hwan-Kyun;Kim Lee-Hun;Kim Jun-Ho;Won Chung-Yuen;Choi Gi-Su;Bae Joung-Hwan
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
    • /
    • pp.438-442
    • /
    • 2001
  • Much attention has given to EMI effects created by variable speed ac drive system. This paper focuses on the switching technique to mitigate common mode voltage. Zero switching states of inverter control invoke large common mode voltage. Using inversed carrier wave, zero switching states are removed. In addition, proposed technique is easy to apply to existing 2-level inverter design. And common mode mitigation technique for sinusoidal PWM is also presented. Proposed switching technique is implemented with a 2.2kw 1735rpm induction motor.

  • PDF

고속도로 오르막 구간의 경사도와 길이에 따른 연료 효율적 주행방법 개발 (Development of a Fuel-Efficient Driving Method based on Slope and Length of Uphill Freeway Section)

  • 최지은;배상훈
    • 한국ITS학회 논문지
    • /
    • 제14권1호
    • /
    • pp.77-84
    • /
    • 2015
  • 2011년 교통부문 온실가스 배출량은 85.04백만$tonCO_2eq$이며 도로분야에서 발생한 온실가스 배출량은 95% 비율을 차지한다. 이러한 온실가스 배출량 감축의 일환으로 급가속 회피, 경제속도 준수 등 에코드라이빙 교육 및 홍보 프로그램이 활성화되고 있으나 근원적인 배출량 감축 기술 개발은 미비한 실정이다. 따라서 본 연구는 도로 경사도 별 최적가속도를 분석하고 하류부의 오르막 구간을 대상으로 연료 효율적인 주행방법의 제시를 목적으로 하였다. 오르막 주행 시 주행모드에 따른 시나리오를 설정하고 시나리오별 속도변화량을 다르게 설정하여 속도 프로파일을 생성하였다. 각 속도 프로파일을 Comprehensive Modal Emission Model에 적용하여 연료소모량을 산정하였다. 도로 경사도, 오르막길이 별 연료소모량이 가장 적게 소모된 주행모드와 속도변화량을 도출하였다. 도출된 주행모드와 속도변화량을 기반으로 에코드라이빙 시 소모된 연료소모량과 cruise control 주행 시 소모된 연료소모량을 비교 분석하였다. 분석 결과, 오르막 지형을 100kph, 90kph, 80kph 속도로 주행 시 에코드라이빙 주행의 연료소모량이 cruise control 주행 보다 각각 33.9%, 30.8%, 5.3% 감축효과가 나타나는 것으로 분석되었다.

디젤엔진 배기가스의 저감에 관한 연구 (A Study on the Reduction of Diesel-Engine Emissions)

  • 허윤복;정순석;김광수
    • 대한안전경영과학회:학술대회논문집
    • /
    • 대한안전경영과학회 2012년 추계학술대회
    • /
    • pp.245-252
    • /
    • 2012
  • Internal engine is the main power source of vehicle and is the main source of air pollution. To satisfy this getting rigorous emission regulation, it must be solved simultaneously the dilemma of reducing emission gas and increasing heat efficiency. Diesel engine is preferred compare with gasoline engine in aspect of energy consumption but it must be solved reducing the containing of NOx, CO and HC. In this study 1. Looking for alternative of performance improvement of Exhaust Gas Recirculation(EGR) which is emission gas reduction system, 2. Reducing malfunction of controlling emission gas 3. Made possible precision control.

  • PDF

공기윤활선 모사 실험에서의 공극률 및 마찰저항저감율 상관성 분석을 위한 실험적 연구 (Experimental study on analysis of correlation between void fraction and drag reduction rate in air lubrication ship)

  • 박승찬;이인원
    • 한국가시화정보학회지
    • /
    • 제18권1호
    • /
    • pp.11-17
    • /
    • 2020
  • The reduction of CO2 emissions has been a key target in the marine industry since the IMO's MEPC published its findings in 2009. Air lubrication method is one of the mature technologies for commercialization to reduce the frictional resistance and enhance fuel efficiency of ships. Since the air lubrication pattern varies according to the ship's standing position and injection flow rate, in order to effectively control the air lubrication system, it is necessary to be able to judge the air layer development state based on the information collected from the monitoring sensor. In this study, we performed the air lubrication ship simulation experiment to measure the void fraction and the frictional resistance. The void fraction was measured to confirm the behavior of the air. Through the measurement of the frictional resistance, the change in frictional resistance reduction rate from the injection point to the longitudinal direction of the ship was confirmed. Based on the measurement results, correlation analysis was performed on void fraction and frictional resistance reduction rate.

선박용 디젤엔진에서 이단지연분사에 따른 배기 배출물 저감에 관한 실험 연구 (Experimental Study on Reduction of Emissions for Marine Diesel Engines with a Double Post Injection)

  • 이원주;최재혁;조권회
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제39권4호
    • /
    • pp.418-424
    • /
    • 2015
  • 국제해사기구 해양환경보호위원회는 2016년 1월 1일부터 배출통제지역을 통항하는 선박에 대해서 Tier III를 적용하여 질소산화물 배출 규제를 더욱 강화하기로 결정하였다. 본 논문에서는 질소산화물 배출 저감을 위한 연구의 일환으로 한국해양대학교 실습선 한바다호를 이용하여 실제 운항 중에 주기관을 단일분사와 이단지연분사의 두 가지 조건으로 운전하여 부하별 배기가스, 실린더 압력, 연료소모량 등을 계측하였다. 그 결과 두 가지 운전조건 모두 엔진의 부하가 증가할수록 질소산화물과 이산화탄소 배출량도 함께 증가하는 경향을 보였으며, 일산화탄소의 농도는 감소하였다. 또한 이단지연분사 시에는 최대폭발압력이 약 10% 이상 감소하였고, 이로 인해 배기가스 내 질소산화물의 농도는 약 25~30% 정도 감소하였다. 하지만 질소산화물 배출 저감의 긍정적인 결과에 반하여 연료소비율이 약 3~5% 정도 증가하는 상반관계가 확인되었다.

운항실습선에 적용한 CO2 배출량 저감대책 (Countermeasures for reduction for CO2 emission from training ship)

  • 이상득;고대권;정석호
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제39권9호
    • /
    • pp.981-986
    • /
    • 2015
  • 지구온난화에 대한 심각성이 대두되면서 선박부문의 온실가스 배출에 관한 연구가 전 세계적으로 활발하게 진행되고 있다. 이에 반하여 국내 연구 수준은 기초에 그치고 있다. 본 논문에서는 선박으로부터 배출되는 이산화탄소의 여러가지 저감대책 중에서 운항손실과 투자비용을 최소화하면서 수행할 수 있는 방법으로 전자제어엔진 사용, 트림 최적화, 프로펠러 연마 및 친환경 방오도료의 사용을 선정하였다. 선정된 저감대책들을 운항실습선에 적용하여 시험 운항을 실시하였고 연료소비율에 미치는 영향을 분석하였다. 그 결과, 각 대책들은 약 1~5%의 연료소비율 저감 효과가 있었고 이를 에너지효율운항지수 산출에 적용하면 약 1~5%를 감소시키는 것을 알 수 있었다. 향후 국제적 환경규제를 제정할 때 우리나라에게 유리하도록 대응하기 위해서는 에너지효율운항지수에 대한 연구에도 지속적인 노력이 필요하다고 사료된다.

In vitro evaluation of nano zinc oxide (nZnO) on mitigation of gaseous emissions

  • Sarker, Niloy Chandra;Keomanivong, Faithe;Borhan, Md.;Rahman, Shafiqur;Swanson, Kendall
    • Journal of Animal Science and Technology
    • /
    • 제60권11호
    • /
    • pp.27.1-27.8
    • /
    • 2018
  • Background: Enteric methane ($CH_4$) accounts for about 70% of total $CH_4$ emissions from the ruminant animals. Researchers are exploring ways to mitigate enteric $CH_4$ emissions from ruminants. Recently, nano zinc oxide (nZnO) has shown potential in reducing $CH_4$ and hydrogen sulfide ($H_2S$) production from the liquid manure under anaerobic storage conditions. Four different levels of nZnO and two types of feed were mixed with rumen fluid to investigate the efficacy of nZnO in mitigating gaseous production. Methods: All experiments with four replicates were conducted in batches in 250 mL glass bottles paired with the ANKOM$^{RF}$ wireless gas production monitoring system. Gas production was monitored continuously for 72 h at a constant temperature of $39{\pm}1^{\circ}C$ in a water bath. Headspace gas samples were collected using gas-tight syringes from the Tedlar bags connected to the glass bottles and analyzed for greenhouse gases ($CH_4$ and carbon dioxide-$CO_2$) and $H_2S$ concentrations. $CH_4$ and $CO_2$ gas concentrations were analyzed using an SRI-8610 Gas Chromatograph and $H_2S$ concentrations were measured using a Jerome 631X meter. At the same time, substrate (i.e. mixed rumen fluid+ NP treatment+ feed composite) samples were collected from the glass bottles at the beginning and at the end of an experiment for bacterial counts, and volatile fatty acids (VFAs) analysis. Results: Compared to the control treatment the $H_2S$ and GHGs concentration reduction after 72 h of the tested nZnO levels varied between 4.89 to 53.65%. Additionally, 0.47 to 22.21% microbial population reduction was observed from the applied nZnO treatments. Application of nZnO at a rate of $1000{\mu}g\;g^{-1}$ have exhibited the highest amount of concentration reductions for all three gases and microbial population. Conclusion: Results suggest that both 500 and $1000{\mu}g\;g^{-1}$ nZnO application levels have the potential to reduce GHG and $H_2S$ concentrations.

중형 운행 경유차용 Urea-SCR 시스템의 아랫첨자 $NO_X$ 저감성능에 미치는 영향인자 (Influential Factors for NO_X Reduction Performance of Urea-SCR System for an In-use Medium Duty Diesel Engine)

  • 김홍석;정용일;송명호;이성욱;박현대;황재원
    • 한국자동차공학회논문집
    • /
    • 제17권1호
    • /
    • pp.154-161
    • /
    • 2009
  • This study is a part of project of urea-SCR system development for an in-use medium duty diesel engine. This study shows the effect of ammonia oxidation catalyst and SCR volume on $NO_X$ reduction performance. When AOC(Ammonia Oxidation Catalyst) is not used, the urea injection should be controlled accurately to prevent $NH_3$ slip. However, it is found that the accurate $NH_3$ slip control is not easy without AOC in real engine operating conditions, because $NH_3$ and $NO_X$ reaction characteristics change with many factors such as exhaust gas temperature and $NH_3$ absorbance on SCR. SCR volume is also one of important design parameters. This study shows that $NO_X$ reduction efficiency increases with increase of SCR volume especially at high space velocity and low exhaust gas temperature conditions. Additionally, this paper shows the emissions of EURO-2 medium duty diesel engine can be improved to the level of EURO-5 with a DPF and urea-SCR system.