Browse > Article
http://dx.doi.org/10.5762/KAIS.2016.17.9.196

Study on the Characteristics of Exhaust Emissions in accordance with the Intake Manifold and Fuel Injector Maintenance of the Electronic Control Diesel Engine  

Kang, Hyun-Jun (Department of Automotive Engineering, Dalseong Campus of Korea Polytechnics)
Kim, Tae-Jung (Department of Automotive Engineering, Dalseong Campus of Korea Polytechnics)
Publication Information
Journal of the Korea Academia-Industrial cooperation Society / v.17, no.9, 2016 , pp. 196-205 More about this Journal
Abstract
The exhaust gas discharged by cars not only threatens the health of the human body, but also contributes to global warming, due to the resulting increase in the concentrations of ozone, fine dust and carbon dioxide. Therefore, the government has steadily implemented careful inspection systems for exhaust emissions, in order to efficiently regulate the exhaust gas of cars. Studies on reducing the exhaust emissions of automobiles have been conducted in various fields, including ones designed to reduce the generation of HC, NOx, and $CO_2$ in the exhaust emission of vehicles. However, there have been insufficient studies on the reduction of the exhaust emission for old diesel vehicles. To develop careful inspection systems for the exhaust emissions of old diesel vehicles, studies on the reduction of the exhaust emissions and improvement of power are necessary by cleaning the carbon sediment in both the intake manifold and injector. Therefore, in this study, we analyzed and compared the amounts of gas emitted when simultaneously cleaning or not cleaning the intake manifold and injector of diesel automobiles with mileages over 80,000 km and operating periods over 5 years. The experimental results showed that in the case where the intake manifold and injector were simultaneously cleaned, there was a decline of 75.2% in the gas emission compared to the cases where only the manifold or injector is cleaned. Also, it was found that simultaneously cleansing the intake manifold and injector enabled the exhaust standard to be satisfied for less than 30% within 8.5 sec.
Keywords
Common rail diesel engine; Exhaust gas; Intake manifold cleaning; Injector cleaning; Soot concentration;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 "Car General Inspection Training Fellowship", Transportation Safety Authority Operational headquarters inspection Automobile Inspection processed, p. 296, pp. 361-389, 2011.03
2 J. H. Kim., "Automotive diesel engine", Golden Bell, 04, 2011.
3 Department of Environment(Environmental Transportation Division), "Regulations on driving vehicle exhaust gas test enforcement tricks Ministry of Environment notification, no. 2014-89, Jun, 2014.
4 H. J Kang, "A Study on the Maintenance Method using the Analysis Data of the Exhaust Emission Close inspection Rest", Department of Mechanical Engineering, Graduate School of Industry Kumoh National Institute of Technology, pp. 10, 2005.
5 A/S Learning Materials "Electronic control diesel engine," A/S Learning Materials Hyundai-Kia Automotive, Ver1, Jun, 2003.
6 D. S. Bae, J. S. Lee. "Study on Smoke Prediction in Heavy-duty Diesel Engine" Journal of academia-industrial technology, vol. 9, no. 4, 2008.
7 K. T. Park, H. H. Lee, J. S Choi, "Professional Engineer Transportation Vehicles", ISBN 2010.
8 B. W. Kim "A Study on Optimization of Catalyst Injection Controller for Reducing Soot", Journal of academia-industrial technology, vol. 7 no. 3, 2006.
9 D. S. Bae "The Performance Test on A Continuous Regeneration DPF in A HD Diesel Engine", Journal of academia-industrial technology, vol. 7 no. 5, 2006.
10 S. J. Moon,S. j. Jeong, S. I Lee, T. H. Kim, "A Numerical Study on the Geometry Optimization of Internal Flow Passage in the Common-rail Diesel Injector for Improving Injection Performance", Transactions of KSAE, vol. 22, no. 2, pp. 91-99, 2014. DOI: http://dx.doi.org/10.7467/KSAE.2014.22.2.091   DOI
11 J. G. Hong, K. W. Ku, J. H. Kim, C. W. Lee, "Spray characteristics of CRDi for injection and ambient pressure", KSAE 2012 Annual Conference in Dae-gu.Gyeong-buk branch, pp. 56-60, 2012.