• 제목/요약/키워드: contour analysis

검색결과 756건 처리시간 0.028초

2축 편심 축력을 받는 고강도 RC 기둥의 비선형해석 (Nonlinear Analysis of High Strength RC Columns Subjected to Axial Load and Biaxial Bending)

  • 신성우;반병열;유석형;조문희;한경돈;이종원
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2001년도 가을 학술발표회 논문집
    • /
    • pp.41-46
    • /
    • 2001
  • The main objective of this study is to provide data on high strength concrete columns subjected to axial load and biaxial bending. For the design of biaxial bending, the approximate method (Bresler load contour method, PCA load contour method) is presented in ACI code. The present study investigate whether the methods are valid in high strength concrete and compare analysis results(by FEM method) with experimental results. Also, this study examines whether statics method and failure surface equation(by Hsu) are adequate.

  • PDF

Numerical Analysis of the Contour Method for Measuring Residual Stresses in Laser Shock Peened Ti-6Al-4V Strips

  • Shin Shang-Hyon
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제29권3호
    • /
    • pp.290-296
    • /
    • 2005
  • The contour method is based on the elastic superposition principle, and relies on deformations that occur when a residually stressed part is cut along a plane. During the cut, the part is constrained at a location along the cut so that deformations are restrained as much as possible. The displacement is applied to an elastic FE model of the half. When plasticity is involved in the relaxation process, the superposition principle is no longer valid, and stress error in the resulting measurement of residual stress would be caused. Residual stress states in a laser peened Ti-6Al-4V strip were taken for the FE simulation.

실험계획법과 유전자 알고리듬을 이용한 타이어 형상설계 (Optimization of Tire Contour by using GA and DOE)

  • 이동우;김성래;조석수
    • 한국산학기술학회논문지
    • /
    • 제12권3호
    • /
    • pp.1063-1069
    • /
    • 2011
  • 오늘날, 차량의 성능 향상에 따라 타이어에 대한 요구가 다양화 되고 요구성능이 고도화됨에 따라 타이어의 설계기술에 보다 다양한 기반기술들이 적극적으로 사용되기 시작하였으며, 이에 대한 많은 연구 중 타이어 형상의 최적화를 통한 타이어 성능 향상을 위한 연구들이 활발히 진행되고 있다. 타이어 형상은 운전성능, 회전저항성, 내구성, 승차감, 소음, 내마모성 등과 같은 차량의 주요성능에 직접적인 영향을 미치는 대단히 중요한 설계인자이다. 따라서 본 연구에서는 실험계획법의 하나인 직교배열표와 회귀식을 이용하여 타이어 형상설계 시에 필요한 유한요소 해석시간을 단축시키고 유전자 알고리듬을 이용하여 타이어의 주요 성능을 만족하는 다목적 형상최적설계를 수행하였다.

시간적 분해에 기반한 F0 궤적 모델에 관한 연구 (F0 Contour Model based on Temporal Decomposition)

  • 변효진;김연준;오영환
    • 한국음향학회지
    • /
    • 제18권8호
    • /
    • pp.75-83
    • /
    • 1999
  • 본 논문에서는 음성합성의 억양 제어를 위한 새로운 F0 궤적 모델을 제안한다. 제안한 모델은 발성된 문장의 F0 궤적을 중첩가산되는 사건들로 분해하고, 각 사건들을 가우시안 종모양의 사건함수로 모델링한다. 그리고 제안한 모델을 위한 파라미터 추정 알고리즘을 제시한다. 제안한 모델은 특정한 음운론적 지식에 기반하지 않았으며, F0 궤적의 분석단계와 합성단계에 모두 사용 가능하다. 제안한 모델의 성능평가를 위해 다양한 장르에서 추출한 여러 형태의 500문장의 코퍼스를 구축하고, 이를 전문 아나운서에게 발성하게 하여 구축한 음성코퍼스로 실험한 결과, 원음성의 F0 궤적과 제안한 모델에 의해 합성된 F0 궤적의 평균 제곱 오류근이 7.87Hz이었다.

  • PDF

자동 세포 분할을 위한 채널 간 상관성 기반 세포 영상의 전처리 알고리즘 (Preprocessing Algorithm of Cell Image Based on Inter-Channel Correlation for Automated Cell Segmentation)

  • 송인환;한찬희;이시웅
    • 한국콘텐츠학회논문지
    • /
    • 제11권5호
    • /
    • pp.84-92
    • /
    • 2011
  • 바이오 영상에서 세포 영역의 자동 분할 기술은 생물학자들이 복잡한 세포의 기능을 이해하는데 도움을 주고, 수작업을 통해 세포를 분석하던 일들을 자동적으로 처리해주는 매우 중요한 기술이다. 기존의 멀티채널 영상으로부터 세포핵 및 세포를 분할하는 방법은 DNA 채널을 이용하여 세포핵을 검출하고, 이를 초기 윤곽으로 하여 Actin 채널에서 밝기 기반의 Active Contour 모델을 통해 세포를 분할하는 2 단계의 과정을 거친다. 그러나 세포 분할 과정에서 채널 간 상관성으로 인해 발생하는 세포 내 불균일한 밝기 문제를 고려하지 않은 채, 밝기 기반의 Active Contour 모델을 적용하여 분할의 성능이 저하되는 문제점이 발생한다. 따라서 본 논문에서는 DNA 와 Actin 채널 간 상관성을 고려하여, DNA 채널 정보를 통해 Actin 채널 내부의 밝기를 균일하게 보정함으로써 밝기 기반의 Active Contour 모델이 세포 분할에 잘 적용 될 수 있는 전처리 알고리즘을 제안한다. 실험을 통해 제안 전처리 과정을 거친 세포 분할 방법의 성능이 기존 방법에 비해 객관적, 주관적으로 크게 향상됨을 증명한다.

등고선 데이터를 이용한 산악지형 유동해석 격자생성 프로그램 개발 및 그 응용 (The development of a mesh generation program using contour line data)

  • 진상문;원찬식;허남건
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2004년도 춘계 학술대회논문집
    • /
    • pp.202-207
    • /
    • 2004
  • In the present study a mesh generation program has been developed by using DXF file. The program consists of DXF file reading and mapping algorithm, which projects the 2-D mesh point onto the triangular surface constructed by nearest three points. The present program has been tested for mesh generations for the road tunnel ventilation analysis and analysis of lava movement in mountain area.

  • PDF

Kriging 기법을 이용한 지하수위 분포 추정 (Application of kriging approach for estimation of water table elevation)

  • 박준경;박영진;위용곤;이상호;홍창수;추석연
    • 한국터널지하공간학회 논문집
    • /
    • 제4권3호
    • /
    • pp.217-227
    • /
    • 2002
  • ${\bigcirc}{\bigcirc}$ 터널 구간의 지하수유동분석을 위해 지구통계학적 기법을 적용하였다. 이 지역의 표고와 관정 및 터널시추공에서의 지하수위의 선형회귀분석결과 상관성이 매우 큰 것으로 나타났다. 보통크리깅 및 공크리깅을 이용하여 작성된 지하수위 등고선도는 표고등고선도를 기준으로 비교해보면 공크리깅에 의한 것이 정밀성이 더 큰 것으로 나타났다. 보통크리깅과 공크리깅에 의해 작성된 지하수위 등고선도에서는 지하수 유동상태를 검토해 보면, 북서쪽의 산악지형에서 계곡쪽으로, 봉우리 일대에서 외곽쪽으로 각각 유동하는 것으로 나타났다. 본 연구를 통해 터널굴착 예정지역의 정확한 분석이나 관측자료의 평가없이 사용하던 지하수위 분포를 정량적으로 설계에 반영할 수 있었으며, 공간상에 분포하는 자료측정의 제한성과 경제적인 이유로 충분한 자료를 확보할 수 없는 현실에 비추어 볼 때 지구통계학은 미지의 구간에 대해 보다 정량적인 자료를 제공할 수 있음을 보여주었다.

  • PDF

불균질.이방성 대수층의 지하수 유동분석에 지구통계기법의 응용 (Application of Geostatistical Methods to Groundwater Flow Analysis in a Heterogeneous Anisotropic Aquifer)

  • 정상용;유인걸;윤명재;권해우;허선희
    • 지질공학
    • /
    • 제9권2호
    • /
    • pp.147-159
    • /
    • 1999
  • 불균질.이방성 대수층에서의 지하수 유동분석을 위하여 지구통계학적 기법을 적용하였다. 연구지역은 대한광업진흥공사의 수문지질조사 사업지구인 전남 함평군 손불면 일대이며, 이 지역 관정의 표고와 지하수위의 선형회귀분석 결과 상관성이 매우 큰 것으로 나타났다. 정규크리깅과 코크리깅을 이용하여 작성된 지하수위 등고선도는 산간지역에서 차이가 크고, 서해에 인접한 구릉이나 평지에서는 큰 차이가 없다. 표고 등 고선도를 기준으로 2개의 지하수위 분포도를 비교해 보면 코크리깅에 의한 것이 정밀성이 더 큰 것으로 나타났다. 정규크리깅과 코크리깅에 의해 작성된 지하수위 등고선도에서 손불면의 지하수 유동상태를 검토해보면, 지형이 높은 산간지역에서 서해바다에 인접한 평야지역으로 지하수가 유동하고 있다. 불균질 이방성.대수층에서의 지하수 유동분석에 대한 지구통계학적 기법의 실효성을 검토하기 위하여 지하수 유동측정기(model 200 $GeoFlo^{R}$)를 이용해서 2개 지하수공내의 유향을 측정한 결과, 측정된 지하수 유향은 정규크리깅과 코크리깅의 지하수위 등고선도에서 추정된 지하수 유향과 대체로 일치하였다.

  • PDF

일반인이 선호하는 얼굴의 미적 단위별 형태와 비율 연구 (A Study on Preferred Morphologic Feature and Proportion of Facial Aesthetic Subunit by Korean General Public)

  • 윤용일;이동락;유중석;이승철;허지연;김주연
    • Archives of Plastic Surgery
    • /
    • 제37권4호
    • /
    • pp.351-360
    • /
    • 2010
  • Purpose: As the influence of mass media increases, the general standard of attractiveness or beauty of a face also changes. The primary purpose of the study is to find out the factors of the attractive and beautiful face recognized by public. Methods: We picked out standard model photography and operated with Adobe$^{(R)}$ Photoshop$^{(R)}$ and Monariza$^{(R)}$ virtual plastic surgery program. The contour of face, eye, nose, forehead, zygoma, chin and proportion of upper, middle, lower face were changed. The interview survey was conducted through structured standard photo for 310 respondents. That was utilized in the final analysis. Multiple regression analysis was executed by SPSS 12.0. It was used to deal with statistical data and all the other necessary analysis. Results: According to general characteristics of the respondents, many differences were found in preferred face and facial aesthetic subunits. The younger generation preferred the lozenge and inverted triangle shape contour. The respondents over 40 of age preferred the egg shape contour. In chin and zygoma contour, the respondents at the age of 20 preferred distinctly small chin and relatively small lower face. On the other hand, the respondents over 40 of age preferred the wide zygoma relatively. In the proportion of upper, middle, lower face, 51.0% of respondents answered 1 : 1 : 1. If they want to have an aesthetic operation, they preferred protruding forehead. Also they preferred the small chin and V-shaped chin in frontal view. Conclusion: Many respondents preferred to have a plastic surgery for the better facial subunit. The statistical evidence from this study suggests that the harmony and balance of facial aesthetic subunits make attractive and beautiful face.

자기공명 심장 영상의 좌심실 경계추출에서의 k 평균 군집화와 병합 알고리즘의 사용으로 인한 전처리 효과 (Preprocessing Effect by Using k-means Clustering and Merging .Algorithms in MR Cardiac Left Ventricle Segmentation)

  • Ik-Hwan Cho;Jung-Su Oh;Kyong-Sik Om;In-Chan Song;Kee-Hyun Chang;Dong-Seok Jeong
    • 대한의용생체공학회:의공학회지
    • /
    • 제24권2호
    • /
    • pp.55-60
    • /
    • 2003
  • 심장 질환의 정량적 분석을 위해서 자기공명 심장 영상에서 좌심실의 경계를 추출하는 것이 중요하다. Snake 또는 active contour 모델은 좌심실 경계 추출을 위해서 사용되어 왔다. 그러나 이 모델을 사용하는데 있어서 좌심실의 경계선이 좌심실 내부에 생긴 결절 때문에 경계선이 지역최소값으로 빠져서 원하는 경계선에 수렴하지 못 할 수도 있다. 그러므로 본 논문에서는 active contour 모델의 성능을 향상시킬 수 있는 k 평균 군집화와 병합 알고리즘을 이용한 전처리 방법을 제안하였다. 제안된 방법으로 지역 최소값 수렴 문제를 해결함을 확인하였다.