• 대한전자공학회논문지SD
• /
• 제46권3호
• /
• pp.51-59
• /
• 2009

본 논문에서는 어쿠스틱 센서 IC 용 연속 시간 시그마-델타 모듈레이터를 구현하였다. 모듈레이터의 전력 소모를 최소화하기 위해 summing 단의 필요성을 제거한 피드-포워드 (feed-forward) 구조로 설계 하였으며, 해상도를 높이기 위해 선형성이 우수한 active-RC 필터를 사용하여 설계 하였다. 또한 초과 루프 지연 시간 (excess loop delay)에 의한 성능 저하를 방지하기 위한 회로 기법을 제안 하였다. 저 전압, 고 해상도의 4차 단일 비트 연속 시간 시그마-델타 모듈레이터는 $0.13{\mu}m$ 1 poly 8 metal CMOS 표준 공정으로 제작하였으며 코어 크기는 $0.58\;mm^2$ 이다 시뮬레이션 결과 25 kHz 의 신호 대역 내에서 91.3 dB의 SNR(signal to noise ratio)을 얻었고 전체 전력 소모는 $290{\mu}W$ 임을 확인하였다.

• 한국IT서비스학회지
• /
• 제10권3호
• /
• pp.113-126
• /
• 2011

The smelting and the continuous casting of steel are important processes that determine the quality of steel products. Especially most of quality defects occur during solidification of the steel continuous casting process. Although quality control techniques such as six sigma, SQC, and TQM can be applied to the continuous casting process for improving quality of steel products, these techniques don't provide real-time analysis to identify the causes of defect occurrence. To solve problems, we have developed a detection model using decision tree which identified abnormal transactions to have a coarse grain structure. And we have compared the proposed model with models using neural network and logistic regression. Experiments on steel data showed that the performance of the proposed model was higher than those of neural network model and logistic regression model. Thus, we expect that the suggested model will be helpful to control the quality of steel products in real-time in the continuous casting process.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.311-316
• /
• 2001

This study analyzed the influence of paste fluidity and vibration time for fundamental properties of porous concrete. Results of this study were shown as follows; 1) Even if target void ratio is same, void ratio and compressive strength of porous concrete is different according to w/c, paste flow and vibration time. So, In case of target void ratio, we must consider the influence of w/c, paste flow, and vibration time. 2) Though w/c and vibration time are same, as paste flow increase, all void ratio, continuous void ratio, and compressive strength decrease and difference between upper and lower void ratio increase. 3) Though w/c and paste flow are same, as vibration time increase, all void ratio and continuous void ratio decrease and difference between upper and lower void ratio increase. Also, compressive strength increase by 10 seconds and decease after 10 seconds. 4) As types of superplasticizer is different, all void ratio, continuous void ratio, and compressive strength are different. So, we must give consideration to paste fluidity and vibration time in order that increase of strength of porous concrete and distribution of uniform void.

• 소성∙가공
• /
• 제27권2호
• /
• pp.100-106
• /
• 2018

In the continuous casting process, the incidence of transverse surface cracks on the piece may occur by multiple and diverse variables. It is noted that mathematical models may predict only the occurance of the transverse surface cracks, but can require a lot of time (more than three days) to produce a result with this process. This study applied neural networks to predict whether the cracks on the piece surface occurs or does not occur. The computation time was shortened to three minutes, making it applicable to an on-line program, which predicts the non-cracks or cracks of the piece surface in the actual continuous casting process. In addition, the operating conditions to prevent the occurrence of the transverse surface cracks, using decision boundaries were also suggested.

• 한국전산유체공학회지
• /
• 제4권2호
• /
• pp.47-56
• /
• 1999

We developed a computer program to simulate the flow field in the presence of electro-magnetic fields. The steady, two-dimensional conservation equations for mass and momentum were solved simultaneously with Maxwell equations for electro-magnetic fields. Using this program, a numerical analysis was carried out to analyze the fluid flow in the continuous casting mold with electromagnetic brake. The effects of magnetic fields size, nozzle angle and EMBR yoke position on the flow fields in the continuous casting were investigated in the present study. The flow fields with EMBR were compared with those without EMBR. We also investigated the distribution of tracer concentration as a function of time in order to calculate their residence time in the mold with EMBR. By controlling the flow fields properly using EMBR, we can prevent the direct flow impaction on the wall which can give a damage on the mold surface and reduce surface defects of stainless steel sheet products.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2009년도 춘계학술발표회 논문집
• /
• pp.75-78
• /
• 2009

기존의 수치지도는 2차원 도엽기반으로 되어 있어 정확성 및 최신성을 요하는 사용자의 요구조건을 충족하기에 많은 어려움이 있다. 본 연구에서는 객체형 연속수치지도의 요구사항을 분석하고 관련 시스템을 설계하였다. 객체형 연속수치지도는 3차원 연속객체로 최선성과 정확성을 갖고 있으며, 관리, 변환, 서비스, 변화정보관리, 수신갱신 및 동시갱신 시스템으로 세분화하여 시스템을 설계하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2286-2288
• /
• 2003

In this paper, a novel and efficient discretization method of a continuous-time Takagi-Sugeno (TS) fuzzy system is proposed. Because of the highly complex and nonlinear interaction among the subsystems, it is very difficult to develop the discretized version of continuous-tine TS fuzzy system. More precisely, to obtain the suitable discretized version, it is necessary to solve two main problems: to discretize global state equations of the continuous-tine TS fuzzy system and to hold the polytopic structure after the discretization. This paper will show the solution to above two problems. Main key idea is to transforme the sampling period into the intersampling period. Finally, To show the feasibility and the validity of the proposed method, a computer simulation is provided.

• 음성과학
• /
• 제3권
• /
• pp.119-131
• /
• 1998

We have developed a keyword spotting system for automatic speech editing. This system recognizes the only keyword 'MBC news' and then sends the time information to the host system. We adopted a vocabulary dependent model based on continuous hidden Markov model, and the Viterbi search was used for recognizing the keyword. In recognizing the keyword, the system uses a parallel network where HMM models are connected independently and back-tracking information for reducing false alarms and missing. We especially focused on implementing a stable and practical real-time system.

• Journal of KIEE
• /
• 제11권1호
• /
• pp.21-26
• /
• 2001

This paper considers the problem of robust H$\infty$ filter is derived by using the equivalence relationship between the FIR filter and the recursive filter, that would be guarantee a prescribed H$\infty$ performance in the continuous-time context, irrespective of the parameter uncertainty and unknown initial states.

• 대한수학회논문집
• /
• 제23권1호
• /
• pp.67-80
• /
• 2008

Feynman's operational calculus for noncommuting operators was studied via measures on the time interval. We investigate some properties of Feynman's operational calculi which include a variety of blends of discrete and continuous measures in the time dependent setting.