• International Journal of Naval Architecture and Ocean Engineering
• /
• v.9 no.3
• /
• pp.339-349
• /
• 2017

This paper is related to structural design evaluation of 19,000 TEU ultra large container ship, dealing with hydroelastic response, i.e. springing and whipping. It illustrates application of direct calculation tools and methodologies to both fatigue and ultimate strength assessment, simultaneously taking into account ship motions and her elastic deformations. Methodology for springing and whipping assessment within so called WhiSp notation is elaborated in details, and in order to evaluate innovative container ship design with increased loading capacity, a series of independent hydroelastic computations for container ship with mobile deckhouse and conventional one are performed with the same calculation setup. Fully coupled 3D FEM - 3D BEM model is applied, while the ultimate bending capacity of hull girder is determined by means of MARS software. Beside comparative analysis of representative quantities for considered ships, relative influence of hydroelasticity on ship response is addressed.

• Nuclear Engineering and Technology
• /
• v.52 no.8
• /
• pp.1817-1825
• /
• 2020

Background: Cosmic ray-induced particles can lead to failure of semiconductors packaged for export during air transport. This work performed MCNP 6.2 simulations to optimize shielding against neutrons and protons induced by cosmic radiation Methods and materials: The energy spectra of protons and neutrons by incident angle at the flight altitude were determined using atmospheric cuboid model. Various candidates for the shielding materials and the geometry of the Unit Load Device Container were evaluated to determine the conditions that allow optimal shielding at all sides of the container. Results: It was found that neutrons and protons, at the flight altitude, generally travel with a downward trajectory especially for the particles with high energy. This indicated that the largest number of particles struck the top of the container. Furthermore, the simulation results showed that, among the materials tested, borated polyethylene and stainless steel were the most optimal shielding materials. The optimal shielding structure was also determined with the weight limit of the container in consideration. Conclusions: Under the determined optimal shielding conditions, a significantly reduced number of neutrons and protons reach the contents inside the container, which ultimately reduces the possibility of semiconductor failure during air transport.

• Journal of Navigation and Port Research
• /
• v.38 no.2
• /
• pp.177-184
• /
• 2014

Recently, brand equity is paid much attention in various industries. However, container liner shipping companies are still unfamiliar with this concept, and also the brand equity model has not been tested yet in shipping context. This study, therefore, aims to measure the relative importance of brand equity factors of container liner shipping companies by employing AHP (Analytic Hierarchy Process). This study concludes that perceived quality, in particular cost-related service quality, is the most influential factor of brand equity, while weak support is found for brand association. In addition to this, group comparisons were conducted between shipping companies, freight forwarders and academics. The results will be useful as they firstly define brand equity and its role in shipping context, highlighting the significance of brand management to container liner shipping firms. This evaluation is not an end in itself, but will eventually be utilised as a tool to build competitive advantage which cannot be easily imitated by competitors.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.9 s.180
• /
• pp.2211-2219
• /
• 2000

Near net shape forming of 316L stainless steel powder was investigated under hot isostatic pressing. To simulate densification and deformation of a powder compact in a container during hot isostatic pressing, the constitutive model of Abouaf and co-workers was implemented into a finite element analysis. An optimal design technique based on the design sensitivity was applied to the container design during hot isostatic pressing. The optimal shape of the container was predicted from the desired final shape of a powder compact by iterative calculations. Experimental data of 316L stainless steel powder showed that the optimally designed container allowed precise forming of the desired powder compact during hot isostatic pressing.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.325-328
• /
• 2006

This study analyzed the fluid state around a container crane according to a wind direction when a wind load was applied to a container crane. The container crane for this research is a model of a 50-ton class used broadly in the current ports. The dimension of an external fluid field is $500m{\times}200m$. This study considered the change of a wind velocity according to an altitude in a criterion of a wind velocity, 50m/s, applying a power series law. An incident angle applied to an interval of 30 degrees in $0^{\circ}C$ ${\sim}$ $180^{\circ}C$ and this study carried out a computation fluid dynamics using a CFX 10. In this study, we indicate the wind pressure and coefficient according to the height and section figure of each member. In addition, we suggest the wind load according to a wind direction.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1999.10a
• /
• pp.333-344
• /
• 1999

Currently many studies on the unmanned gantry crane for the automated container terminal are accomplished. This is needed for the development of large scale, automation, high speed, unmanned system and information system in port facility. In order to do efficient container handling job in port yard, the automated handling system is well adapted to the job environments and all-season weather, In order to realize the automatic and unmanned system for container handling job, the required functions and main structure system are studied. The major problems of operation of the conventional gantry crane are that the vibration of gantry structure body is occurred by operation and that high-speed and precision position-velocity control and the capability to dope to the external disturbances caused by the wind, rain, fog and job environments. In this paper, the fundamental study for establishment of the concept and the dynamic modelling of the major sub system of the unmanned gantry crane is presented. These studies are useful for design and manufacturing of the new concept model of the unmanned gantry crane for efficient operation of the automated container terminal.

• Journal of the Korean Institute of Navigation
• /
• v.19 no.1
• /
• pp.33-48
• /
• 1995

In the process of containerization, the problem of regional maldistribution of container management plan arises seriously due to several factors like a number of unbalances of containers between loading and discharging ports. This study focus on the minimizing cost. This study is composed of two models which in effective management decision making show decision of the number of containers and transfer of empty containers. One is decision of the number of containers which carriers should possess by appropriate forecasting and the other is effective management decision making which includes the transfer of empty containers on calling ports. This study has suggested as follows, First, the Time Series analysis method, especially the "Exponential Smooting with Trend Adjustment" was used to forecast the trade volumes for the designated traffic route. Second, the Time Series analysis method in deciding the optimal number of owned container at the unbalances trade situation between East Bound and West Bound service, most important variables were found such as total traffic volume, the calling interval at a port, the number of days of voyage and the length of stay on shore of container for the optimal number of owned container. Third, effective management decision making model, which makes it possible to analyze the impacts of change in important matters such as lease and positioning policy, and actually influence decision making.on making.

• Journal of Navigation and Port Research
• /
• v.36 no.8
• /
• pp.673-681
• /
• 2012

As competition increases among ports, new marketing strategies and differentiated means in addition to the existing core services are needed to prevent existing container shipping companies from escaping and to attract new customers. The additional services and reward programs are investigated. How these variables affect relational commitment in terms of customer retention is examined. Customers of the container terminals are examined in terms of psychological behavior. This study presents the structural equation model that shows the connection among benefits, rewards, switching costs and relational commitment. The empirical analysis is done with the subject of the container terminal users and the implications are derived.

• Journal of Navigation and Port Research
• /
• v.46 no.2
• /
• pp.110-120
• /
• 2022

Spain is Europe's second-largest country with total throughput reaching 16.7 million twenty-foot equivalent units (TEU) by 2020. The purpose of this study was to measure and compare the efficiency of 17 container terminals. As a study method, the DEA-CCR model, undesirable variable, and Malmquist Index (MI) were used for data envelopment analysis (DEA). The study results are as follow: (1) DEA-CCR is used to evaluate basic efficiency. The most efficient terminals are decision-making units DMU 1 (APM Terminals (Algeciras Port)), DMU 2 (Total Terminal International Algeciras (Algeciras Port)) and DMU 5 (Barcelona Europe South Terminal (Barcelona Port)). (2) Undesirable DEA was conducted to suggest inefficiency from the undesirable output. Overall, the efficiency scores were reduced. However, DMU 1, DMU 2, and DMU 5 maintained efficiency scores regardless of the finish factor. (3) Malmquist Index was used to observe technology and efficiency changes dynamically. The changes in TCI affected Spanish container terminals more than the Technical Efficiency Change Index (TECI) in 2018-2019. However, in 2019-2020, the TECI was 2.706, higher than the TCI value, indicating that the change in TECI had more influence on the increase in productivity. This study offers a broader understanding of Spanish container terminals.

• Journal of Korea Trade
• /
• v.27 no.1
• /
• pp.19-41
• /
• 2023

Purpose - Conventional supply chains (SCs) must identify facilitating roles, such as port or terminal operators, shipping companies, and freight forwarders in executing the various logistical activities that support the organizational strategies of shippers. Meanwhile, supply chain collaborative practices can engender a willingness to share relevant and mutually helpful information. To this end, this study seeks to identify the impact of supply chain integration (SCI) on information sharing (IS) and the operational performance (OP) of Korea's container-shipping industry from the perspective of social capital. Design/methodology - We established the research model for this study based on previous studies. In administering the survey, we obtained 149 valid responses from employees working in liner-shipping companies and freight forwarders in Korea. With the collected questionnaires, the study's hypotheses were tested using SPSS 26.0 and AMOS 26.0 Findings - The results indicate the existence of a mediated relationship where the impact of SCI on OP is mediated by IS. The effect of external integration (EI) on OP is fully mediated by information quality (IQ) and information-sharing content (ISC). Furthermore, EI, IQ and ISC partially mediate the relationship between internal integration (II) and OP. Originality/value - This study expands SCI contexts, where ISC and IQ respectively serve as bridges between EI and OP which has crucial implications for container-shipping companies in terms of improving their performance.