DOI QR코드

DOI QR Code

Optimal Shape Design of a Container Under Hot Isostatic Pressing by a Finite Element Method

열간등가압소결 공정에서 유한요소법을 이용한 컨테이너 형상의 최적설계

  • Published : 2000.09.01

Abstract

Near net shape forming of 316L stainless steel powder was investigated under hot isostatic pressing. To simulate densification and deformation of a powder compact in a container during hot isostatic pressing, the constitutive model of Abouaf and co-workers was implemented into a finite element analysis. An optimal design technique based on the design sensitivity was applied to the container design during hot isostatic pressing. The optimal shape of the container was predicted from the desired final shape of a powder compact by iterative calculations. Experimental data of 316L stainless steel powder showed that the optimally designed container allowed precise forming of the desired powder compact during hot isostatic pressing.

Keywords

References

  1. Stevensen, R.W., 1984, P/M Stainless steels, Metal Handbook, 9th ed., Vol. 7, Powder Metallurgy, Metals Park, Ohio
  2. Besson, J. and Abouaf, M., 1991, 'Behavior of Cylindrical HIP Containers,' Int. J. Solids Structures, Vol. 38, No. 6, pp. 691-702
  3. Kim, K. T. and Jeon, Y. C., 1998, 'Densification Behavior Steel Powder under High Temperature,' Mater. Sci. Eng. A245, No. 1, pp. 64-71 https://doi.org/10.1016/S0921-5093(97)00696-5
  4. Abouaf, M., Chenot, J. L., Raisson, G. and Bauduin, P, 1988, 'Finite Element Simulation of Hot Isostatic Pressing of Metal Powder,' Int.J.Num.Mech.Eng., Vol. 25, pp. 191-212 https://doi.org/10.1002/nme.1620250116
  5. Kuhn, L. T. and McMeeking, R. M., 1992, 'Power Law Creep of Power Bonded by Isolated contacts,' Int. J. Mech. Sci., Vol. 34, No. 7, pp. 563-573 https://doi.org/10.1016/0020-7403(92)90031-B
  6. Sofronics, P. and McMeeking, R. M., 1992, 'Creep of Power-Law Material Contacting Spherical Voids,' J.Appl.Mech., Vol. 5, pp. s88-s95
  7. Olevsky, E., Maximenko, A., Van Dick, S., Froyen, L. and Delaey, L., 1998, 'Container influence on Shrinkage under Hot Isostatic Pressing - I. Shrinkage Anisotropy of a Cylindrical Specimen,' Int. J. Solids Structures, Vol. 35, No. 18, pp. 2283-2303 https://doi.org/10.1016/S0020-7683(97)00189-3
  8. Jinka, A. G. K. and Lewis, R. W., 1994, 'Finite Element Simulation of Hot Isostatic Pressing of Metal Powers,' Comput. Methods Appl.Mech.Engrg., Vol. 114, No. 3-4, pp. 249-272 https://doi.org/10.1002/nme.1620250116
  9. Svoboda, A., Haggblad, H. and Nasstrom, M., 1996, 'Simulation of Hot Isostatic Pressing of Metal Powder Components to Near Net Shape,' Engineering Computations, Vol. 13, No. 5, pp. 13-37 https://doi.org/10.1108/02644409610120713
  10. Jeon, Y. C. and Kim, K. T., 1999, 'Near-net-shape forming of 316L stainless steel powder under hot isostatic pressing,' Int.J.Mech,Sci., Vol. 41, No. 7, pp. 815-830 https://doi.org/10.1016/S0020-7403(98)00053-8
  11. Olevsky, E. and Maximenko, A., 1998, 'Container Influence on Shrinkage under Hot Isostatic Pressing-II. Shape Distortion of Cylindrical Specimens,' Int.J. Solids Structures, Vol. 35, No. 18, pp. 2305-2314 https://doi.org/10.1016/S0020-7683(97)00185-6
  12. Park, J. J., Rebelo, N. and Kobayashi, S., 1983, 'A New Approach to Perform Design in Metal Forming with the Finite Element Method,' Int.J.Mach.Tool Des.Res, Vol. 23, pp. 71-79 https://doi.org/10.1016/0020-7357(83)90008-2
  13. Hwang, S. M. and Kobayashi, S., 1984, 'Perform Design in Plane Strain Rolling by the Finite Element Method,' int. J.Mach.Tool.Des.Res., Vol. 24, p. 253 https://doi.org/10.1016/0020-7357(84)90060-X
  14. Grandhi, R. V., Kumar, A., Chaudhary, A. and Malas, J., 1993, 'State-Space Representation of Optimal Control of Non-Linear Material Deformation Using the Finite Element Method,' Int.J.Num.Meth.Eng., Vol. 36, pp. 1967-1986 https://doi.org/10.1002/nme.1620361202
  15. Kusiak, J. and Thompson, E. G., 1989, 'Optimization Techniques for Extrusion Die Shape Design,' Proc.3rd Int.Conf.on Numer.Methods in Ind.Forming Processes, Fort Collins, Colorado, pp. 569-574
  16. Barinarayanan, S. and Zabaras, N., 1995, 'Perform Design in Metal Forming,' Proc.5rd Int.Conf.on Numer.Methods in Ind.Forming Processes, pp. 533-538, Ithaca, New York
  17. Fourment, L., Balan, T. and Chenot, J. L., 'Optimal Design for Non-Steady State Metal Forming Process-Applications of Shape Optimization in Forging,' Int. J. Num.Meth.Eng., Vol. 39, 1996, pp. 51-65 https://doi.org/10.1002/(SICI)1097-0207(19960115)39:1<51::AID-NME845>3.3.CO;2-R
  18. Roy, S., Ghoshi, S. and Shivpuri, R., 1997, 'A New Approach to Optimal Design of Multi-Stage Metal Forming Processes with Micro Genetic Algorithms,' Int.J.Mach.Tools.Manufact., Vol. 37, pp. 29-44 https://doi.org/10.1016/0890-6955(95)00120-4
  19. Chung, S. H., Lee, J. H., Chung, H. S. and Hwang,S. M., 'Process Optimal Design in Non-steady Forming of Porous Metals by the finite Element Methods,' Int.J.Mech.Sci., accepted https://doi.org/10.1016/S0020-7403(99)00027-2
  20. Besson, J. and Evans, A. G., 1992, 'The Effect of Reinforcements on the Densification of a Metal Powder,' Acta metall mater, Vol. 40, No. 9, pp. 2247-2255 https://doi.org/10.1016/0956-7151(92)90143-3
  21. Bouaziz, O., Dellis, C. and Stuta, P., 1996, 'Creation of a Material Data file for Modeling HIPing of an Austenitic Stainless Steel,' Proc. of Int'l Workshop on Modeling of Metal Powder Forming Processes, Grenoble, France, pp. 67-75
  22. Kwon, Y. S., Lee, H. T. and Kim, K. T., 1997, 'Analysis for Cold Die Compaction of Stainless-Steel Powder,' J. Eng.Mat.Tech., Vol. 119, pp. 366-373